Hovatek Forum HARDWARE Boxes and Dongles [Tutorial] How to use Infinity CM2 SPD to convert pac.sc to pac
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


[Tutorial] How to use Infinity CM2 SPD to convert pac.sc to pac

[Tutorial] How to use Infinity CM2 SPD to convert pac.sc to pac

Pages (2): Previous 1 2
X3non
X3non
X3non
Recognized Contributor
22,062
11-09-2020, 09:04 PM
#11



(11-09-2020, 03:15 PM)Dilone61 No, just the files I told you about. there are 29 files in the folder and no pac.sc file. it uses 1 file called spd_prog.xml. I'll try to take a picture of them and attach.

ok.. awaiting the screenshot
meanwhile, have you tried using an older spd module for backup? i.e assuming the chipset of the device in question is supported, you could get a pac.sc backup which you could then convert
Dilone61
Dilone61
Dilone61
Experienced Member
91
12-09-2020, 02:52 AM
#12
(11-09-2020, 09:04 PM)X3non
(11-09-2020, 03:15 PM)Dilone61 No, just the files I told you about. there are 29 files in the folder and no pac.sc file. it uses 1 file called spd_prog.xml. I'll try to take a picture of them and attach.

ok.. awaiting the screenshot
meanwhile, have you tried using an older spd module for backup? i.e assuming the chipset of the device in question is supported, you could get a pac.sc backup which you could then convert

I'll look for a friend with an older version of the app and try. Meanwhile Since what was missing from the backup were fdl1 and FDL2, I have found them from a backup I tried to create back in June. I have built a pac file from the files I have from CM II SPD. Since I have a bricked phone of the same model, I'll try the pac file on it. after all it's already bricked and even if the file does not work as intended, I still have nothing to lose. I'll be sure to post how it goes.
Dilone61
Dilone61
Dilone61
Experienced Member
91
07-11-2020, 03:10 PM
#13
(12-09-2020, 02:52 AM)Dilone61
(11-09-2020, 09:04 PM)X3non
(11-09-2020, 03:15 PM)Dilone61 No, just the files I told you about. there are 29 files in the folder and no pac.sc file. it uses 1 file called spd_prog.xml. I'll try to take a picture of them and attach.

ok.. awaiting the screenshot
meanwhile, have you tried using an older spd module for backup? i.e assuming the chipset of the device in question is supported, you could get a pac.sc backup which you could then convert

I'll look for a friend with an older version of the app and try. Meanwhile Since what was missing from the backup were fdl1 and FDL2, I have found them from a backup I tried to create back in June. I have built a pac file from the files I have from CM II SPD. Since I have a bricked phone of the same model, I'll try the pac file on it. after all it's already bricked and even if the file does not work as intended, I still have nothing to lose. I'll be sure to post how it goes.

Hi,I failed terebly. the folder contains nothing like a pac.sc file. the files in the folder are as follows, the extentions have been included.
1. _android_info.txt.
2. boot.img.
3. boot_logo.bmp.
4. cache.img.
5. deltanv_l.bin.
6. dtbo.img.
7. fastboot_logo.bmp.
8. gdsp_l.bin.
9. gnssbdmodem.bin.
10. gnssmodem.bin.
11. ldsp_l.bin.
12. modem_l.bin.
13. modem_wcn.img.
14. nvitem_l.bin.
15. odmko.img.
16. persist.img.
17. phase.cfg.
18. pm_sys.bin.
19. prodnv.img.
20. recovery.img.
21. sml.bin.
22. socko.img.
23. SPD_PROG.xml.
24. SPD0000.fg.
25. SPDAC99.
26. super.img.
27. tos.bin.
28. u-boot.bin.
29. u-boot-spl.bin.
30. userdata.img.
31. vbmeta.img.
32. vbmeta_system.img.
33. vbmeta_vendor.img.
I have tried on 2 different CM ii softwares and 2 different phones. have you ever encountered something like this? How did you solve it?
hovatek
hovatek
hovatek
Administrator
49,570
09-11-2020, 10:15 AM
#14
(07-11-2020, 03:10 PM)Dilone61 Hi,I failed terebly. the folder contains nothing like a pac.sc file. the files in the folder are as follows, the extentions have been included.

Recent versions of CM2 use PROG.xml instead of pac.sc and gives no option of converting to .pac
Create a new thread if you have any more questions on this issue

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
X3non
X3non
X3non
Recognized Contributor
22,062
09-11-2020, 10:17 AM
#15



(07-11-2020, 03:10 PM)Dilone61 ...
I have tried on 2 different CM ii softwares and 2 different phones. have you ever encountered something like this? How did you solve it?

the format you have here isn't pac.sc, you can't convert this, can only flash using cm2
pac.sc format is a format used by old versions cm2 spd module
Dilone61
Dilone61
Dilone61
Experienced Member
91
11-11-2020, 01:24 AM
#16
(09-11-2020, 10:17 AM)X3non
(07-11-2020, 03:10 PM)Dilone61 ...
I have tried on 2 different CM ii softwares and 2 different phones. have you ever encountered something like this? How did you solve it?

the format you have here isn't pac.sc, you can't convert this, can only flash using cm2
pac.sc format is a format used by old versions cm2 spd module

Oh! Now I understand. It only means that I will have to discard my miracle box and buy cm2sp2 for me to be able to use the firmwares. Thanks a lot.
Pages (2): Previous 1 2
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram