Hovatek Forum MOBILE Android [Please help] So flash tool error
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


[Please help] So flash tool error

[Please help] So flash tool error

Omnitrix
Omnitrix
Omnitrix
Junior Member
34
09-03-2017, 07:54 AM
#1



In my micromax a102 8gb+1gb. I flashed wrong firmware and it completely dead. PC detect on USB single port. When I flashing stock from sp flasp toot it gives error -s_ft_enable_dram_failed(4032). Any suggestions. Its urgent.
freshtyt
freshtyt
freshtyt
Senior Member
2,949
09-03-2017, 01:43 PM
#2
(09-03-2017, 07:54 AM)Omnitrix In my micromax a102 8gb+1gb. I flashed wrong firmware and it completely dead. PC detect on USB single port. When I flashing stock from sp flasp toot it gives error -s_ft_enable_dram_failed(4032). Any suggestions. Its urgent.

was the flashing successful?
have you tried flashing a different firmware?
Omnitrix
Omnitrix
Omnitrix
Junior Member
34
10-03-2017, 03:19 PM
#3
(09-03-2017, 01:43 PM)freshtyt
(09-03-2017, 07:54 AM)Omnitrix In my micromax a102 8gb+1gb. I flashed wrong firmware and it completely dead. PC detect on USB single port. When I flashing stock from sp flasp toot it gives error -s_ft_enable_dram_failed(4032). Any suggestions. Its urgent.

was the flashing successful?
have you tried flashing a different firmware?
no flashing was not successful.[CRYING FACE] i had a correct firmware.

Sent from my Pixel V2 using the Hovatek Forum App
hovatek
hovatek
hovatek
Administrator
49,570
10-03-2017, 05:58 PM
#4
(10-03-2017, 03:19 PM)Omnitrix no flashing was not successful.[CRYING FACE] i had a correct firmware.

Sent from my Pixel V2 using the Hovatek Forum App

Here's what I need you to clarify.
By Flashing being successful or not, what is meant is that did you see the 100% OK prompt or the phone wen't dead after the error message popped up.
If the phone went dead just after the error popped up then the phone went dead due to an interruption, refer to https://www.hovatek.com/forum/thread-808.html .
If the error 4032 persists while you're trying to flash then its either the firmware isn't compatible or you're selecting the wrong option in SP flash tool (refer to https://www.hovatek.com/forum/thread-439.html )
This post was last modified: 10-03-2017, 05:59 PM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram