February Discount: 48% discount on Hovatek's online training which covers Mediatek Smartphones, Smartwatches, Feature phones & Tablets. ENROLL NOW (Feb, 2019)
03-10-2017, 03:14 PM
i used the sp flash tool and a rom i downloaded on my tecno n9 and now the tablet wont boot up. during booting, the tablet goes off after the tecno logo and stays off.
X
|
Thanks to brianel |
03-10-2017, 05:54 PM
(03-10-2017, 03:14 PM)brianel Wrote: i used the sp flash tool and a rom i downloaded on my tecno n9 and now the tablet wont boot up. during booting, the tablet goes off after the tecno logo and stays off.
Have you tried charging the battery incase its drained?
Also, where did you download the ROM from?
Need faster replies or urgent assistance?
Try our Private Support for a one-on-one session with a Hovatek Rep. UPGRADE NOW!
X
|
Thanks to hovatek |
03-16-2017, 07:46 PM
(03-10-2017, 05:54 PM)hovatek Wrote:(03-10-2017, 03:14 PM)brianel Wrote: i used the sp flash tool and a rom i downloaded on my tecno n9 and now the tablet wont boot up. during booting, the tablet goes off after the tecno logo and stays off.
Have you tried charging the battery incase its drained?
Also, where did you download the ROM from?
the battery is fully charged. i downloaded the rom from this site
X
|
Thanks to brianel |
03-16-2017, 09:17 PM
Did your first flashing successful? Or finish with errors?
Sent from my Z10 using Hovatek mobile
Sent from my Z10 using Hovatek mobile
X
|
Thanks to innagee |
03-17-2017, 01:59 PM
(03-16-2017, 07:46 PM)brianel Wrote: the battery is fully charged. i downloaded the rom from this site
Are you still able to successfully reflash the firmware?
Need faster replies or urgent assistance?
Try our Private Support for a one-on-one session with a Hovatek Rep. UPGRADE NOW!
X
|
Thanks to hovatek |
03-20-2017, 12:21 PM
X
|
Thanks to brianel |
03-20-2017, 12:22 PM
X
|
Thanks to brianel |
03-20-2017, 05:22 PM
(03-20-2017, 12:21 PM)brianel Wrote: Yes, I am able to reflash the firmware. i have done it about 3 times and the problem still persists.
Connect to power while switched off. Does it show a steady charging sign? and what's the battery level if it does
Also, there are two variants listed @ https://forum.hovatek.com/thread-311.html , have you tried both?
Need faster replies or urgent assistance?
Try our Private Support for a one-on-one session with a Hovatek Rep. UPGRADE NOW!
X
|
Thanks to hovatek |
03-20-2017, 07:22 PM
Download another rom for your device I think the first one is incompatible. Rom here: https://forum.hovatek.com/thread-311.html
Sent from my Z10 using Hovatek mobile
Sent from my Z10 using Hovatek mobile
X
|
Thanks to innagee |
03-21-2017, 06:18 PM
(03-20-2017, 05:22 PM)hovatek Wrote:(03-20-2017, 12:21 PM)brianel Wrote: Yes, I am able to reflash the firmware. i have done it about 3 times and the problem still persists.
Connect to power while switched off. Does it show a steady charging sign? and what's the battery level if it does
Also, there are two variants listed @ https://forum.hovatek.com/thread-311.html , have you tried both?
When i connect to to a power source, it shows a steady charging sign. The battery level is about 80%.
Also i have tried both variants, but the result is the same
X
|
Thanks to brianel |
« Next Oldest | Next Newest »
Users browsing this thread: 1 Guest(s)