[Please help] huawei g750 u10 dead after flash please help
[Please help] huawei g750 u10 dead after flash please help
(29-03-2017, 02:47 PM)yasirsh I have Huawei G750-U10 dead after flash and cant't flash it any more. It always shows the error 2004.Your pcb image is not very clear. Within the sim setter are golden points, few others located on the other side of pcb
I need to know the Kcolo point to be able to flash it again.
I need quick help
here is pcb images
http://www11.0zz0.com/2017/03/29/16/547451360.jpg
>>
http://www11.0zz0.com/2017/03/29/16/366877152.jpg
>>>..
pls help
(29-03-2017, 03:05 PM)droidmobitech(29-03-2017, 02:47 PM)yasirsh I have Huawei G750-U10 dead after flash and cant't flash it any more. It always shows the error 2004.Your pcb image is not very clear. Within the sim setter are golden points, few others located on the other side of pcb
I need to know the Kcolo point to be able to flash it again.
I need quick help
here is pcb images
http://www11.0zz0.com/2017/03/29/16/547451360.jpg
>>
http://www11.0zz0.com/2017/03/29/16/366877152.jpg
>>>..
pls help
In some phones "COLO" or "KOLO" or "KCOLO" not written for those type of phones you have to test all points one by one Short Golden point with GND and attach usb cable which point short with gnd can able to detect your phone by pc is Force Preloader Mode Test Point !! Keep in mind Don't Short Vcc,Vcharge or any other pin which have 4.x Volts also i had tested "Colo" or "Kolo" or "KCOLO"don't have any kind of volts..
(29-03-2017, 06:30 PM)yasirsh brom error s_ft_da_no_response (4001)
(29-03-2017, 10:49 PM)hovatek(29-03-2017, 06:30 PM)yasirsh brom error s_ft_da_no_response (4001)
That's a communication issue. refer to https://www.hovatek.com/forum/thread-439.html