Huawei 730-u00 Mtk chipset phone
Huawei 730-u00 Mtk chipset phone
(11-05-2017, 10:03 AM)hovatek(10-05-2017, 11:17 AM)hackyft no ! from working phone.
Now, here's the plan.
Its between a problem with /userdata or the emmc chip.
I need you to do 3 things so I verify what the problem could be.
1. Dump the bricked phone's firmware in scatter format
2. Format the bricked phone but don't flash anything, see if it stays dead
3. Flash the Miracle Box backup to the bricked phone excluding userdata and cache, see if it completes
(12-05-2017, 01:08 PM)hackyft Miracle shows this when reading whith scatter file option
https://db.tt/cFZWAUrrEt
(12-05-2017, 07:01 PM)hovatek(12-05-2017, 01:08 PM)hackyft Miracle shows this when reading whith scatter file option
https://db.tt/cFZWAUrrEt
Looking like an emmc issue.
3. Flash the Miracle Box backup to the bricked phone excluding userdata and cache, see if it completes
still waiting for feedback on that
Also, when you format only using the Old SP Flash tool, does the phone stay dead or its able to come on?
(12-05-2017, 09:10 PM)hackyft i flashed miracle box dumped file with out cache and userdata. . .flashed completely. when formating the phone with old sptool the didnt die. . .the same bootloop. . .
(12-05-2017, 09:10 PM)hackyft i flashed miracle box dumped file with out cache and userdata. . .flashed completely. when formating the phone with old sptool the didnt die. . .the same bootloop. . .
(13-05-2017, 09:25 AM)freshtyt(12-05-2017, 09:10 PM)hackyft i flashed miracle box dumped file with out cache and userdata. . .flashed completely. when formating the phone with old sptool the didnt die. . .the same bootloop. . .
after flashing successfully using miracle box, did you try doing a factory reset in recovery mode?
(13-05-2017, 11:34 PM)hackyft https://db.tt/rXXf9Ly07B
(15-05-2017, 09:20 AM)hovatek(13-05-2017, 11:34 PM)hackyft https://db.tt/rXXf9Ly07B
There are three ways to close in on /data before considering an emmc chip change
1. Try flashing only preloader and data in Miracle box
2. Do an emmc wipe in factory mode (vol down + power)
3. Get a custom recovery to work then try to mount -unmount userdata