[Please help] i have hp 7 voice tab
[Please help] i have hp 7 voice tab
(14-05-2017, 11:10 PM)innagee(14-05-2017, 09:22 AM)vmk(13-05-2017, 01:18 PM)hovatek(13-05-2017, 04:47 AM)vmk YES ,i have right firmware
But i can't flash using sp flash tool
Please help , is there any other way to do flash
Connect the phone to power for a few hours so we're sure battery in't drained then retry flashing.
Consider holding volume up or down button when connecting to PC for flashing
When I connect phone to power it shows charging for some time then restarts to boot logo and then in boot loop
But even i tried after some hours of time but I can't flash
Have you tried wiping the phone in recovery using Vol up + Power key.
Sent from my Z10 using Hovatek mobile
(14-05-2017, 09:22 AM)vmk When I connect phone to power it shows charging for some time then restarts to boot logo and then in boot loop
But even i tried after some hours of time but I can't flash
(15-05-2017, 10:29 AM)hovatek(14-05-2017, 09:22 AM)vmk When I connect phone to power it shows charging for some time then restarts to boot logo and then in boot loop
But even i tried after some hours of time but I can't flash
1. What version of Sp Flash tool are you using?
2. Try connecting for flash without holding any button
3. Can you get the phone into Fastboot?
4. Check what the phone get detected as in Device Manager then update it using https://www.hovatek.com/forum/thread-16839.html
(15-05-2017, 11:17 AM)vmk I tried flashing but it's again getting error
(B_rom error can't download da(0×7d4))
I can enter into daarvoor
But when i flash original recovery it says security denied -i think that is because of locked bootloader
What should I do
fastboot getvar unlocked
(15-05-2017, 11:54 PM)hovatek(15-05-2017, 11:17 AM)vmk I tried flashing but it's again getting error
(B_rom error can't download da(0×7d4))
I can enter into daarvoor
But when i flash original recovery it says security denied -i think that is because of locked bootloader
What should I do
I take it you mean you can enter fastboot.
Run this command
Code:fastboot getvar unlocked
I want to see the output.
Also, you've still not told me the version of SP Flash tool you're using
(17-05-2017, 05:10 AM)vmk I have run the command you given but it sticks at
'.... '
at this
Actually my device is not recognized in fast boot i am using that using device vendor id. does it make any difference using like that ?
(17-05-2017, 10:00 AM)hovatek(17-05-2017, 05:10 AM)vmk I have run the command you given but it sticks at
'.... '
at this
Actually my device is not recognized in fast boot i am using that using device vendor id. does it make any difference using like that ?
I don't quite understand you
(17-05-2017, 04:15 PM)vmk I can't unlock bootloader help me please