parth
parth
(26-07-2017, 07:51 PM)parthnigam sir/ma'am,
I have done ROM flashing of my phone with battery in it. I didn’t interrupted any process and let it complete. I got a confirmation of download from SP flash tool too. After this I have format and have choose auto format flash option in SP flash tool. After this I an unable to switch on my phone. as u said I tried to flash again but sp tool giving me error saying 'Enable DRAM fail'. please give me further instructions to solve this. I am attaching a screenshot of error.
(26-07-2017, 08:58 PM)freshtyt No change at all.i tried all the combinations u suggested. same error is coming that I attached.
(26-07-2017, 07:51 PM)parthnigam sir/ma'am,
I have done ROM flashing of my phone with battery in it. I didn’t interrupted any process and let it complete. I got a confirmation of download from SP flash tool too. After this I have format and have choose auto format flash option in SP flash tool. After this I an unable to switch on my phone. as u said I tried to flash again but sp tool giving me error saying 'Enable DRAM fail'. please give me further instructions to solve this. I am attaching a screenshot of error.
try holding the vol down button before connecting the phone to PC for flashing (you can also try vol up OR power + vol down OR power + vol up)
then retry flashing again
(27-07-2017, 05:33 PM)parthnigamFirst of all, you should not auto format after you flash your device. But you don't actually need to use the auto format option in spflashtool. So, immediately after flashing, you are to switch in your device. If the problem continues. Just remove the file in your stock romcalled "checksum.ini"(26-07-2017, 08:58 PM)freshtyt No change at all.i tried all the combinations u suggested. same error is coming that I attached.
(26-07-2017, 07:51 PM)parthnigam sir/ma'am,
I have done ROM flashing of my phone with battery in it. I didn’t interrupted any process and let it complete. I got a confirmation of download from SP flash tool too. After this I have format and have choose auto format flash option in SP flash tool. After this I an unable to switch on my phone. as u said I tried to flash again but sp tool giving me error saying 'Enable DRAM fail'. please give me further instructions to solve this. I am attaching a screenshot of error.
try holding the vol down button before connecting the phone to PC for flashing (you can also try vol up OR power + vol down OR power + vol up)
then retry flashing again
(28-07-2017, 03:54 PM)damiflex(27-07-2017, 05:33 PM)parthnigamFirst of all, you should not auto format after you flash your device. But you don't actually need to use the auto format option in spflashtool. So, immediately after flashing, you are to switch in your device. If the problem continues. Just remove the file in your stock romcalled "checksum.ini"(26-07-2017, 08:58 PM)freshtyt No change at all.i tried all the combinations u suggested. same error is coming that I attached.
(26-07-2017, 07:51 PM)parthnigam sir/ma'am,
I have done ROM flashing of my phone with battery in it. I didn’t interrupted any process and let it complete. I got a confirmation of download from SP flash tool too. After this I have format and have choose auto format flash option in SP flash tool. After this I an unable to switch on my phone. as u said I tried to flash again but sp tool giving me error saying 'Enable DRAM fail'. please give me further instructions to solve this. I am attaching a screenshot of error.
try holding the vol down button before connecting the phone to PC for flashing (you can also try vol up OR power + vol down OR power + vol up)
then retry flashing again
(26-07-2017, 07:51 PM)parthnigam sir/ma'am,
I have done ROM flashing of my phone with battery in it. I didn’t interrupted any process and let it complete. I got a confirmation of download from SP flash tool too. After this I have format and have choose auto format flash option in SP flash tool. After this I an unable to switch on my phone. as u said I tried to flash again but sp tool giving me error saying 'Enable DRAM fail'. please give me further instructions to solve this. I am attaching a screenshot of error.
(29-07-2017, 02:10 AM)thanks higher build worked. solved my limited app_n memory too. now I can access all of my ROM.(26-07-2017, 07:51 PM)parthnigam sir/ma'am,
I have done ROM flashing of my phone with battery in it. I didn’t interrupted any process and let it complete. I got a confirmation of download from SP flash tool too. After this I have format and have choose auto format flash option in SP flash tool. After this I an unable to switch on my phone. as u said I tried to flash again but sp tool giving me error saying 'Enable DRAM fail'. please give me further instructions to solve this. I am attaching a screenshot of error.
If you're getting error 4032 after formatting or flashing with a firmware then you need to search for another firmware to flash, preferably one of a higher Build