[Please help] Tecno WX3 LTE Stock rom, custom reovery image needed.
[Please help] Tecno WX3 LTE Stock rom, custom reovery image needed.
(28-07-2017, 04:12 PM)innagee(28-07-2017, 03:39 AM)JuneX05(27-07-2017, 11:25 PM)hovatek(27-07-2017, 06:09 PM)JuneX05 Can i get a detailed tutorial on how can i backup the firmware with other tool than mtk or sp coz you said they are not yet suitable.
Your phone is already formatted. There's nothing to backup unless you get a working phone of the same model
Yeah i have the phone, of the same model.
What should i do?
Here's a guide on how to dump the ROM from the working phone, see https://www.hovatek.com/forum/thread-13347.html
(28-07-2017, 06:54 PM)JuneX05 but hovatek said my phone will not work on miracle box
(29-07-2017, 01:25 AM)hovatek(28-07-2017, 06:54 PM)JuneX05 but hovatek said my phone will not work on miracle box
On a higher version (with Box), it would work. But not likely on version 2.27A you're using
A working phone of the same model is unlikely to help unless you have a chinese box or compatible firmware.
On an experimental note, you might be able to extract one partition at a time armed with the scatter file of the Tecno WX3 .
(29-07-2017, 10:14 AM)JuneX05 to be honest, i don't get it.
does it mean in all ways i have some chances of not getting the firmware through any of the mentioned process?
(29-07-2017, 11:58 AM)X3non v2.27 is an old version and won't work on the chipset of your device.
so unless you have a recent hardware dongle e.g latest version of miracle box or CM2 then you can dump the firmware from the working phone and flash yours.
the last statement in @Hovatek's reply is experimental i.e there is no guarantees if it would help revive your device BUT you are free to try it out.
download scatter file for your chipset @ https://www.hovatek.com/forum/thread-12724.html
do a readback of each partition of the working phone one partition at a time using the guide @ https://www.hovatek.com/forum/thread-526.html
PS its virtually the same process you used to get the recovery and boot from your device
(29-07-2017, 12:50 PM)JuneX05 Ok so i should use the hardware dongle and not the software one(s) to atleast get better results right?
And will i be able to get the preloader file because in spflash tool i could not acquire it at all even no matter how much i tried.
(29-07-2017, 10:28 PM)hovatek(29-07-2017, 12:50 PM)JuneX05 Ok so i should use the hardware dongle and not the software one(s) to atleast get better results right?
And will i be able to get the preloader file because in spflash tool i could not acquire it at all even no matter how much i tried.
You would need the hardware dongle (with a higher version of Miracle Box) to dump successfully. Since the dongle isn't free (you have to buy it), I have suggested dumping one partition at a time from the working phone using sp flash tool.
(08-08-2017, 06:30 AM)JuneX05 I tried this option but why cant I dump the bootloader?
Everytime it doesn't detect the bootloader
(10-08-2017, 10:43 PM)JuneX05 I mean pre loader