Hovatek Forum MOBILE Android Bricked MTN L860
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Bricked MTN L860

Bricked MTN L860

Pages (4): Previous 1 2 3 4 Next
X3non
X3non
X3non
Recognized Contributor
22,062
22-08-2017, 02:59 PM
#21



in addition, from your drivers screenshot above, check the properties of that MTK usb port driver
and upload a screenshot
This post was last modified: 22-08-2017, 03:13 PM by X3non.
gougoudinho
gougoudinho
gougoudinho
Respected Member
124
22-08-2017, 04:21 PM
#22
(22-08-2017, 02:52 PM)hovatek
(22-08-2017, 08:35 AM)gougoudinho Before flashing the Meizu custom I have tried to flash a custom rom that I have ported myself but it failed without having any impact on the system.I think so...
But this issue can be solved?Is it possible to fix a bootloader,boot or preloader that has benn tampered?

One other scenario i've encountered this  error is when using an old version of a tool (one lower than what the device requires)
You'll have to flash back your preloader first anyways.
The firmware you have with you is a Miracle Box dump right?
Can I see a full screenshot of its content
Yes....This is the content of my firmware dumped with Miracle box
Attached Files
.png
Dump firmware....png
Size: 312.77 KB / Downloads: 5
.png
Firmware dumped 1.png
Size: 299 KB / Downloads: 7
gougoudinho
gougoudinho
gougoudinho
Respected Member
124
23-08-2017, 08:20 AM
#23
(22-08-2017, 04:21 PM)gougoudinho
(22-08-2017, 02:52 PM)hovatek
(22-08-2017, 08:35 AM)gougoudinho Before flashing the Meizu custom I have tried to flash a custom rom that I have ported myself but it failed without having any impact on the system.I think so...
But this issue can be solved?Is it possible to fix a bootloader,boot or preloader that has benn tampered?

One other scenario i've encountered this  error is when using an old version of a tool (one lower than what the device requires)
You'll have to flash back your preloader first anyways.
The firmware you have with you is a Miracle Box dump right?
Can I see a full screenshot of its content
Yes....This is the content of my firmware dumped with Miracle box
Please I need to precise that I tried it once and I had a message that was saying that the file is bad....something like that
This post was last modified: 23-08-2017, 08:25 AM by gougoudinho.
Attached Files
.jpg
Preloader.bin flash error 1.jpg
Size: 343.66 KB / Downloads: 4
gougoudinho
gougoudinho
gougoudinho
Respected Member
124
23-08-2017, 09:24 AM
#24
(22-08-2017, 02:59 PM)X3non in addition, from your drivers screenshot above, check the properties of that MTK usb port driver
and upload a screenshot
Good morning
This is it....
Attached Files
.jpg
Properties.jpg
Size: 300.22 KB / Downloads: 3
.jpg
Properties 1.jpg
Size: 252.23 KB / Downloads: 3
.jpg
Properties 2.jpg
Size: 276.07 KB / Downloads: 2
hovatek
hovatek
hovatek
Administrator
49,570
23-08-2017, 02:19 PM
#25



(23-08-2017, 08:20 AM)gougoudinho Please I need to precise that I tried it once and I had a message that was saying that the file is bad....something like that

From your screenshot, I can see you're doing the wrong thing.
Please, follow https://www.hovatek.com/forum/thread-14106.html and ensure to see the video

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
gougoudinho
gougoudinho
gougoudinho
Respected Member
124
23-08-2017, 04:59 PM
#26
(23-08-2017, 02:19 PM)hovatek
(23-08-2017, 08:20 AM)gougoudinho Please I need to precise that I tried it once and I had a message that was saying that the file is bad....something like that

From your screenshot, I can see you're doing the wrong thing.
Please, follow https://www.hovatek.com/forum/thread-14106.html and ensure to see the video

I have tried as instructed and I still have the same error.Is this can be because of low baterry too?As we know I can't charge my battery through my device.
Attached Files
.jpg
Flash 2.jpg
Size: 352.82 KB / Downloads: 3
xerxes
xerxes
xerxes
Senior Member
8,355
23-08-2017, 07:35 PM
#27
(23-08-2017, 04:59 PM)gougoudinho
(23-08-2017, 02:19 PM)hovatek
(23-08-2017, 08:20 AM)gougoudinho Please I need to precise that I tried it once and I had a message that was saying that the file is bad....something like that

From your screenshot, I can see you're doing the wrong thing.
Please, follow https://www.hovatek.com/forum/thread-14106.html and ensure to see the video

I have tried as instructed and I still have the same error.Is this can be because of low baterry too?As we know I can't charge my battery through my device.

Battery should be well charged before flashing, miracle also tells that "Battery Should be Charged more then 50%"
hovatek
hovatek
hovatek
Administrator
49,570
23-08-2017, 11:48 PM
#28
(23-08-2017, 04:59 PM)gougoudinho I have tried as instructed and I still have the same error.Is this can be because of low baterry too?As we know I can't charge my battery through my device.

Now, this error is different from the first.
You'll get this when you don't tick preloader when flashing so ensure to tick the preloader box when flashing

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
gougoudinho
gougoudinho
gougoudinho
Respected Member
124
25-08-2017, 08:08 AM
#29
(23-08-2017, 11:48 PM)hovatek
(23-08-2017, 04:59 PM)gougoudinho I have tried as instructed and I still have the same error.Is this can be because of low baterry too?As we know I can't charge my battery through my device.

Now, this error is different from the first.
You'll get this when you don't tick preloader when flashing so ensure to tick the preloader box when flashing

Hello
Sorry for the delay of my answer....
The issue is that after following all the instructions I still have the same error.Immediatly I plug the device ,it shows the error without even asking me what I want to write.
That's the main issue so I can't even tick or untick something...
What can I really do?I know that there is a way out....
Attached Files
.jpg
Write 1.jpg
Size: 414.71 KB / Downloads: 2
gougoudinho
gougoudinho
gougoudinho
Respected Member
124
25-08-2017, 09:55 AM
#30



(25-08-2017, 08:08 AM)gougoudinho
(23-08-2017, 11:48 PM)hovatek
(23-08-2017, 04:59 PM)gougoudinho I have tried as instructed and I still have the same error.Is this can be because of low baterry too?As we know I can't charge my battery through my device.

Now, this error is different from the first.
You'll get this when you don't tick preloader when flashing so ensure to tick the preloader box when flashing

Hello
Sorry for the delay of my answer....
The issue is that after following all the instructions I still have the same error.Immediatly I plug the device ,it shows the error without even asking me what I want to write.
That's the main issue so I can't even tick or untick something...
What can I really do?I know that there is a way out....

I discover anotner thing.When I am connecting my device to my computer with the battery,it shows me unknown device...And when I do it without it gives me mtk....
Some screenshots to illustrate that....
Thanks once more
Attached Files
.jpg
Unknown.jpg
Size: 286.54 KB / Downloads: 1
.jpg
Unknown 1.jpg
Size: 283.93 KB / Downloads: 1
Pages (4): Previous 1 2 3 4 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram