[Development] How to Root the Infinix X572 Note 4
[Development] How to Root the Infinix X572 Note 4
(04-09-2017, 09:11 PM)X3nonThanks for d tutorial.
The Infinix X572 Note 4 (e.g X572-H5312A-N-170618V90 ) is an MT6753 powered phone running on Android 7 (Nougat)
How to root the Infinix X572 Note 4
- Dump your firmware in scatter format using Miracle Box @ https://www.hovatek.com/forum/thread-13347.html
- Download SuperSU 2.82 @ https://www.androidfilehost.com/?fid=889764386195902173 and save to both phone storage and SD card
- Create a new folder named Hovatek on your PC
- Copy preloader.bin from your Miracle Box backup into the Hovatek folder
- Download TWRP for Infinix X572 Note 4 ported by Team Hovatek @ https://drive.google.com/open?id=0B4S-Z7...FNYaDRiTmc
- Copy the TWRP recovery.bin and scatter file from the TWRP zip file downloaded above into the Hovatek folder, making peloader.bin, scatter file and recovery.bin (TWRP) in the folder
- Flash the preloader.bin and recovery.bin using Miracle Box @ https://www.hovatek.com/forum/thread-14106.html
- Boot the phone into recovery mode (Vol up + Power) after flashing
- In TWRP, if you get a prompt asking you to swipe to allow TWRP modify the system partition, tap KEEP READ ONLY
- In TWRP recovery, tap Install
- Navigate to the location of the SuperSU.zip and select it
- Swipe to confirm flashing of SuperSU.zip and wait till flashing is complete
- Reboot the phone normally
- Confirm Root by installing and running Root Checker @ https://play.google.com/store/apps/detai...heck&hl=en
(04-10-2017, 05:43 PM)Bibson Thanks for d tutorial.
It worked!
Challenges now lies with after using Camelephone to change imei, I get null imei upon restart.
Wats d way Out.?
(04-10-2017, 05:59 PM)X3non(04-10-2017, 05:43 PM)Bibson Thanks for d tutorial.
It worked!
Challenges now lies with after using Camelephone to change imei, I get null imei upon restart.
Wats d way Out.?
if you followed the entire procedure, then you should have a miracle firmware dump.
flash secro and nvram from your dump using miracle box @ https://www.hovatek.com/forum/thread-14106.html ;that should fix the null imei
(04-10-2017, 05:43 PM)Bibson(04-09-2017, 09:11 PM)X3nonThanks for d tutorial.
The Infinix X572 Note 4 (e.g X572-H5312A-N-170618V90 ) is an MT6753 powered phone running on Android 7 (Nougat)
How to root the Infinix X572 Note 4
- Dump your firmware in scatter format using Miracle Box @ https://www.hovatek.com/forum/thread-13347.html
- Download SuperSU 2.82 @ https://www.androidfilehost.com/?fid=889764386195902173 and save to both phone storage and SD card
- Create a new folder named Hovatek on your PC
- Copy preloader.bin from your Miracle Box backup into the Hovatek folder
- Download TWRP for Infinix X572 Note 4 ported by Team Hovatek @ https://drive.google.com/open?id=0B4S-Z7...FNYaDRiTmc
- Copy the TWRP recovery.bin and scatter file from the TWRP zip file downloaded above into the Hovatek folder, making peloader.bin, scatter file and recovery.bin (TWRP) in the folder
- Flash the preloader.bin and recovery.bin using Miracle Box @ https://www.hovatek.com/forum/thread-14106.html
- Boot the phone into recovery mode (Vol up + Power) after flashing
- In TWRP, if you get a prompt asking you to swipe to allow TWRP modify the system partition, tap KEEP READ ONLY
- In TWRP recovery, tap Install
- Navigate to the location of the SuperSU.zip and select it
- Swipe to confirm flashing of SuperSU.zip and wait till flashing is complete
- Reboot the phone normally
- Confirm Root by installing and running Root Checker @ https://play.google.com/store/apps/detai...heck&hl=en
It worked!
Challenges now lies with after using Camelephone to change imei, I get null imei upon restart.
Wats d way Out.?
(09-10-2017, 08:23 AM)phunkypalace(04-10-2017, 05:43 PM)Bibson(04-09-2017, 09:11 PM)X3nonThanks for d tutorial.
The Infinix X572 Note 4 (e.g X572-H5312A-N-170618V90 ) is an MT6753 powered phone running on Android 7 (Nougat)
How to root the Infinix X572 Note 4
- Dump your firmware in scatter format using Miracle Box @ https://www.hovatek.com/forum/thread-13347.html
- Download SuperSU 2.82 @ https://www.androidfilehost.com/?fid=889764386195902173 and save to both phone storage and SD card
- Create a new folder named Hovatek on your PC
- Copy preloader.bin from your Miracle Box backup into the Hovatek folder
- Download TWRP for Infinix X572 Note 4 ported by Team Hovatek @ https://drive.google.com/open?id=0B4S-Z7...FNYaDRiTmc
- Copy the TWRP recovery.bin and scatter file from the TWRP zip file downloaded above into the Hovatek folder, making peloader.bin, scatter file and recovery.bin (TWRP) in the folder
- Flash the preloader.bin and recovery.bin using Miracle Box @ https://www.hovatek.com/forum/thread-14106.html
- Boot the phone into recovery mode (Vol up + Power) after flashing
- In TWRP, if you get a prompt asking you to swipe to allow TWRP modify the system partition, tap KEEP READ ONLY
- In TWRP recovery, tap Install
- Navigate to the location of the SuperSU.zip and select it
- Swipe to confirm flashing of SuperSU.zip and wait till flashing is complete
- Reboot the phone normally
- Confirm Root by installing and running Root Checker @ https://play.google.com/store/apps/detai...heck&hl=en
It worked!
Challenges now lies with after using Camelephone to change imei, I get null imei upon restart.
Wats d way Out.?
I believe you trying to change your imei. Download tool hero or download mobile uncle tools and upgrade to tool hero. It's easy to change imei from there without giving you a null imei. Grant it root permission when it ask. Thank me later.
(16-10-2017, 12:32 AM)Fantastic2m Hello guys.
I did a backup of my phone and copied the preloader.bin, the recovery, and the scatter file in a folder an a it should.
When I try to flash it shows only the recovery and no preloader. Did the backup multi times trying with different files I collected same thin
I flashed the recovery only and I can't access it with the up and power, what could I be doing wrong?
I once updated my phone thou.
X572-H5312AD-N-170816V131
Can anyone help?
(16-10-2017, 12:54 PM)hovatek(16-10-2017, 12:32 AM)Fantastic2m Hello guys.
I did a backup of my phone and copied the preloader.bin, the recovery, and the scatter file in a folder an a it should.
When I try to flash it shows only the recovery and no preloader. Did the backup multi times trying with different files I collected same thin
I flashed the recovery only and I can't access it with the up and power, what could I be doing wrong?
I once updated my phone thou.
X572-H5312AD-N-170816V131
Can anyone help?
1. Which partition(s) did you backup in Miracle box
2. Did you use the scatter file we uploaded or the scatter file from your dump
(21-10-2017, 07:23 AM)Fantastic2m Hello, thanks for your quick reply..
I backed up the whole Rom took about 2hrs to complete.
I used the scatter. Txt in the twrp and also the one from the Rom dump..
Both would bring out just the recovery.image and not the preloader.bin
Some how I found a preloader on here and tried to flash with recovery Still don't work
When I try to goto recovery its shows error file missing or smthn similar
So I started to think if it's cos I updated my phone recently.
I rood my Tecno L9 with miracle Box from tutorials here easily.