Hovatek Forum MOBILE Android [Please help] Tecno W3 just showing Tecno on screen and not booting anymore
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


[Please help] Tecno W3 just showing Tecno on screen and not booting anymore

[Please help] Tecno W3 just showing Tecno on screen and not booting anymore

Pages (2): 1 2 Next
itsgboy
itsgboy
itsgboy
Enthusiastic Member
8
05-09-2017, 09:22 AM
#1



Please i need help on how to flash my Tecno W3, have tried the methods i found but its still not working, the phone comes up but just get stucked at Tecno, powered by Android, have tried flashing it using SP Flash tool but no response.

Will the phone ever work again or can i be given step by step method on flashing the phone

Less i forget, i am using a windows 8 laptop, could that be the reason why its not working

To explain further, i used two versions of sp flash tool and i got the following responses:
1.  When i used Sp Flash tool V5. 1640 it gave me this response Error:?? (0x3)
2.  When i used Sp Flash tool V6. 1652.01 at a point it gave me this response Brom error: S_Brom_CMD_STARTCMD_FAIL (2005).

The stock rom am using is TECNO W3-H806-A1-M-HiOS-20160612. Its this Stock Rom Correct.

I also used Miracle Box but this is the error message i got.

ERR 00: 5A
ERR 01: 00000000_5A000000


Please i really need help.
This post was last modified: 05-09-2017, 10:59 AM by itsgboy.
hovatek
hovatek
hovatek
Administrator
49,570
05-09-2017, 01:17 PM
#2
(05-09-2017, 09:22 AM)itsgboy Please i need help on how to flash my Tecno W3, have tried the methods i found but its still not working, the phone comes up but just get stucked at Tecno, powered by Android, have tried flashing it using SP Flash tool but no response.

Will the phone ever work again or can i be given step by step method on flashing the phone

Less i forget, i am using a windows 8 laptop, could that be the reason why its not working

To explain further, i used two versions of sp flash tool and i got the following responses:
1.  When i used Sp Flash tool V5. 1640 it gave me this response Error:?? (0x3)
2.  When i used Sp Flash tool V6. 1652.01 at a point it gave me this response Brom error: S_Brom_CMD_STARTCMD_FAIL (2005).

The stock rom am using is TECNO W3-H806-A1-M-HiOS-20160612. Its this Stock Rom Correct.

I also used Miracle Box but this is the error message i got.

ERR 00: 5A
ERR 01: 00000000_5A000000


Please i really need help.

If you downloaded that firmware from https://www.hovatek.com/forum/thread-311.html then its a Miracle Box dump .
You're supposed to flash using Miracle Box @ https://www.hovatek.com/forum/thread-14106.html and not sp flash tool
Ensure to see the Miracle Box video and upload a screenshot of any error you get in Miracle Box

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
itsgboy
itsgboy
itsgboy
Enthusiastic Member
8
06-09-2017, 07:17 AM
#3
.jpg
miracle.jpg
Size: 168.01 KB / Downloads: 31
.jpg
miracle.jpg
Size: 168.01 KB / Downloads: 31
.jpg
miracle.jpg
Size: 168.01 KB / Downloads: 31

(05-09-2017, 01:17 PM)hovatek
(05-09-2017, 09:22 AM)itsgboy Please i need help on how to flash my Tecno W3, have tried the methods i found but its still not working, the phone comes up but just get stucked at Tecno, powered by Android, have tried flashing it using SP Flash tool but no response.

Will the phone ever work again or can i be given step by step method on flashing the phone

Less i forget, i am using a windows 8 laptop, could that be the reason why its not working

To explain further, i used two versions of sp flash tool and i got the following responses:
1.  When i used Sp Flash tool V5. 1640 it gave me this response Error:?? (0x3)
2.  When i used Sp Flash tool V6. 1652.01 at a point it gave me this response Brom error: S_Brom_CMD_STARTCMD_FAIL (2005).

The stock rom am using is TECNO W3-H806-A1-M-HiOS-20160612. Its this Stock Rom Correct.

I also used Miracle Box but this is the error message i got.

ERR 00: 5A
ERR 01: 00000000_5A000000


Please i really need help.

If you downloaded that firmware from https://www.hovatek.com/forum/thread-311.html then its a Miracle Box dump .
You're supposed to flash using Miracle Box @ https://www.hovatek.com/forum/thread-14106.html  and not sp flash tool
Ensure to see the Miracle Box video and  upload a screenshot of any error you get in Miracle Box

I have tried flashing again using Miracle box and it still gave me thesame error:
ERR 00:5A
ERR 01: 00000000_5A000000

Attached is the screenshot

.jpg
miracle.jpg
Size: 168.01 KB / Downloads: 31
itsgboy
itsgboy
itsgboy
Enthusiastic Member
8
06-09-2017, 08:04 AM
#4
.jpg
screenshot 2.jpg
Size: 168.13 KB / Downloads: 5
.jpg
screenshot 2.jpg
Size: 168.13 KB / Downloads: 5

(06-09-2017, 07:17 AM)itsgboy
(05-09-2017, 01:17 PM)hovatek
(05-09-2017, 09:22 AM)itsgboy Please i need help on how to flash my Tecno W3, have tried the methods i found but its still not working, the phone comes up but just get stucked at Tecno, powered by Android, have tried flashing it using SP Flash tool but no response.

Will the phone ever work again or can i be given step by step method on flashing the phone

Less i forget, i am using a windows 8 laptop, could that be the reason why its not working

To explain further, i used two versions of sp flash tool and i got the following responses:
1.  When i used Sp Flash tool V5. 1640 it gave me this response Error:?? (0x3)
2.  When i used Sp Flash tool V6. 1652.01 at a point it gave me this response Brom error: S_Brom_CMD_STARTCMD_FAIL (2005).

The stock rom am using is TECNO W3-H806-A1-M-HiOS-20160612. Its this Stock Rom Correct.

I also used Miracle Box but this is the error message i got.

ERR 00: 5A
ERR 01: 00000000_5A000000


Please i really need help.

If you downloaded that firmware from https://www.hovatek.com/forum/thread-311.html then its a Miracle Box dump .
You're supposed to flash using Miracle Box @ https://www.hovatek.com/forum/thread-14106.html  and not sp flash tool
Ensure to see the Miracle Box video and  upload a screenshot of any error you get in Miracle Box

I have tried flashing again using Miracle box and it still gave me thesame error:
ERR 00:5A
ERR 01: 00000000_5A000000

Attached is the screenshot


i also decided to write the files one by one, so i unclicked the preloader and it gave me this error
Error: parti

attached is the screenshot
X3non
X3non
X3non
Recognized Contributor
22,062
06-09-2017, 09:34 AM
#5



(06-09-2017, 07:17 AM)itsgboy I have tried flashing again using Miracle box and it still gave me thesame error:
ERR 00:5A
ERR 01: 00000000_5A000000

Attached is the screenshot

either wrong firmware or broken emmc chip
do you remember the build number of your W3?
also Readinfo of your device using miracle box and post a screenshot here
itsgboy
itsgboy
itsgboy
Enthusiastic Member
8
06-09-2017, 03:26 PM
#6
.jpg
screenshot1.jpg
Size: 169.58 KB / Downloads: 10
.jpg
screenshot2.jpg
Size: 174.81 KB / Downloads: 6

(06-09-2017, 09:34 AM)X3non
(06-09-2017, 07:17 AM)itsgboy I have tried flashing again using Miracle box and it still gave me thesame error:
ERR 00:5A
ERR 01: 00000000_5A000000

Attached is the screenshot

either wrong firmware or broken emmc chip
do you remember the build number of your W3?
also Readinfo of your device using miracle box and post a screenshot here


This is the screenshot for my device. the firmware i used is TECNO W3-H806-A1-M-HiOS-20160612 and the build number of my device is id:W3-H806-A1-M-HiOS-20160612
hovatek
hovatek
hovatek
Administrator
49,570
07-09-2017, 10:00 AM
#7
(06-09-2017, 03:26 PM)itsgboy .

Your phone's Build Number is W3-H806-A1-M-HIOS-20160612
Means its an A1 variant, not A2 as you'd earlier said.
Stick to the Miracle Box W3-H806-A1-M-HIOS-20160612 dump.
Now, for the Miracle Box error, which boxes / partitions were ticked when you were prompted?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
itsgboy
itsgboy
itsgboy
Enthusiastic Member
8
07-09-2017, 10:22 AM
#8
(07-09-2017, 10:00 AM)hovatek
(06-09-2017, 03:26 PM)itsgboy .

Your phone's Build Number is W3-H806-A1-M-HIOS-20160612
Means its an A1 variant, not A2 as you'd earlier said.
Stick to the Miracle Box W3-H806-A1-M-HIOS-20160612 dump.
Now, for the Miracle Box error, which boxes / partitions were ticked when you were prompted?

I never said it was A2 variant, I just posted the stock rom I downloaded, well as regards the partitions that were ticked when prompted, it was all that was ticked.

I really appreciate you guys in trying to help me solve this issue, am already even getting fed up.

In one of your replies you made mention about emmc chip stuff, have you verified from the screenshot I posted if the emmc chip is not the problem, because I don't know what to think anymore or is it because am using a windows 8 laptop.

Anyway I do hope I could get another favourable response to help me flash my phone.

Thanks a bunch
damiflex
damiflex
damiflex
Techie Member
76
07-09-2017, 12:46 PM
#9
(05-09-2017, 09:22 AM)itsgboy Please i need help on how to flash my Tecno W3, have tried the methods i found but its still not working, the phone comes up but just get stucked at Tecno, powered by Android, have tried flashing it using SP Flash tool but no response.

Will the phone ever work again or can i be given step by step method on flashing the phone

Less i forget, i am using a windows 8 laptop, could that be the reason why its not working

To explain further, i used two versions of sp flash tool and i got the following responses:
1.  When i used Sp Flash tool V5. 1640 it gave me this response Error:?? (0x3)
2.  When i used Sp Flash tool V6. 1652.01 at a point it gave me this response Brom error: S_Brom_CMD_STARTCMD_FAIL (2005).

The stock rom am using is TECNO W3-H806-A1-M-HiOS-20160612. Its this Stock Rom Correct.

I also used Miracle Box but this is the error message i got.

ERR 00: 5A
ERR 01: 00000000_5A000000


Please i really need help.

First, dont give up yet. They are all really helping. These sort of things happens when the phone is not at hand.

now, if your flashfiles are in "bin" format then you make use of miracle box, but if they appear in "img" format, you make use of spflashtool.
damiflex
damiflex
damiflex
Techie Member
76
07-09-2017, 12:47 PM
#10



First, dont give up yet. They are all really helping. These sort of things happens when the phone is not at hand.

now, if your flashfiles are in "bin" format then you make use of miracle box, but if they appear in "img" format, you make use of spflashtool.
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram