Tecno W3 LTE won't boot to TWRP recovery after flashing
Tecno W3 LTE won't boot to TWRP recovery after flashing
(27-09-2017, 06:13 AM)pjack17 I flashed TWRP on my tecno W3 using sp flash tool, after it went successfully, i powered my phone into recovery mode with the right combination of keys. But it wont boot into anything, but when i power it into normal mode, it goes successfully..and then i switch off and boot into recovery mode with the same combination of keys i used after flashing, it end up into stock recovery. It's like my phone is locked from booting into custom recoveries(even after unlocking the bootloader), and then it overwrites the custom recovery with stock after booting into normal mode. Is there any way i can get my phone to accept custom recoveries, and i have no root thats why im trying to flash a custom recovery first.
Also: I tried to use adb to boot into fastboot mode and boot into the same custom recovery i have by the command: fastboot boot <filename.img here>..but i didnt boot into anything, it just boot normally like i restarted my phone. I even tried to flash the img file in fastboot mode and then boot up with the fastboot command mentioned above, but it just boots into normal mode.
Specs
Model: Tecno W3LTE W3LTE-H356D1-M-161216V55
Chipset: MTK 6735M
CPU architect: armx64
Android SDK: 23
Android version: Marshamallow 6.0
Bootloader: Unlocked via adb
(27-09-2017, 11:24 AM)hovatek(27-09-2017, 06:13 AM)pjack17 I flashed TWRP on my tecno W3 using sp flash tool, after it went successfully, i powered my phone into recovery mode with the right combination of keys. But it wont boot into anything, but when i power it into normal mode, it goes successfully..and then i switch off and boot into recovery mode with the same combination of keys i used after flashing, it end up into stock recovery. It's like my phone is locked from booting into custom recoveries(even after unlocking the bootloader), and then it overwrites the custom recovery with stock after booting into normal mode. Is there any way i can get my phone to accept custom recoveries, and i have no root thats why im trying to flash a custom recovery first.
Also: I tried to use adb to boot into fastboot mode and boot into the same custom recovery i have by the command: fastboot boot <filename.img here>..but i didnt boot into anything, it just boot normally like i restarted my phone. I even tried to flash the img file in fastboot mode and then boot up with the fastboot command mentioned above, but it just boots into normal mode.
Specs
Model: Tecno W3LTE W3LTE-H356D1-M-161216V55
Chipset: MTK 6735M
CPU architect: armx64
Android SDK: 23
Android version: Marshamallow 6.0
Bootloader: Unlocked via adb
Which of the custom recoveries
(27-09-2017, 11:24 AM)hovatek Which of the custom recoveries
(27-09-2017, 04:15 PM)pjack17 none of those, i downloaded this one from dropbox..the link cant be pasted here, but the file ame is "CUBOT_DINOSAUR_V13_20170103.rar" just paste it on google with no quotes and you shall find the file ad site i downloaded it from..ad i didnt use those because i thought they were not compatible with my phone after i just compared their model numbers to mine
(27-09-2017, 05:04 PM)X3non it doesnt seem like you actually used a recovery ported for your device let alone build.
first dump your firmware in scatter file format using the guide
lets know when you are done
BTW from your build number in the initial post, your device model is W3LTE not W3
(28-09-2017, 04:16 PM)pjack17 Alright since Miracle Box wont recognise my device and gives an error "none usbport, maybe driver not installed"...here is the scatter file from the stock ROM i downloaded online, and it successfully flashed with no problems. So it might resemble my devices scatter file.
none usbport maybe driver not install
none usbport maybe driver not insta
(28-09-2017, 07:20 PM)hovatek
none usbport me driver not inst
none usbport maybe driver not
That scatter file is of secondary use to us ATM
What I need to confirm is if your phone is a W3 or W3 LTE
We have the files for that Build of W3 LTE and can easily fetch them from there but your model is yet to be clarified
(28-09-2017, 08:17 PM)pjack17 It's W3LTE-H356D1-M-161216V55...and the scatter file is the one i used to flash a stock ROM on it, so it's of the same ROM that's on my device right now.
(29-09-2017, 11:11 AM)hovatek TWRP for your Build has been added
Flash it using SP Flash Tool