[Please help] Magnus SX5QC Hard Buttons Mixed Up (MT6582)
[Please help] Magnus SX5QC Hard Buttons Mixed Up (MT6582)
(12-12-2017, 03:31 PM)ColinB I have managed to get Maui META to connect by
Power OFF the phone. Hold Vol- then connect USB and release Vol- Phone stays at boot logo and I get connected.
Unfortunately I cant find the DB file on my phone, there is only 1 file
(12-12-2017, 08:24 PM)ColinB Hi Hovatec,
thanks for the quick reply. IMEI is good with Engineer mode.
System problems I'm having are:
I can connect to my WiFi LAN and ftp, but cant get on the web. And of course random MAC address on the WiFi.
(13-12-2017, 02:56 PM)hovatek(12-12-2017, 08:24 PM)ColinB Hi Hovatec,
thanks for the quick reply. IMEI is good with Engineer mode.
System problems I'm having are:
I can connect to my WiFi LAN and ftp, but cant get on the web. And of course random MAC address on the WiFi.
1. Are you able to surf via mobile data
2. Have you tried a different WiFi
(14-12-2017, 08:49 AM)ColinB Sorry for the late reply (I thought I had instant notification by email turned on).
I sorted the WiFi problem. Turned out it was a "Known Fault" with my ISP router. It has 2 guest WiFi accounts on the box and the one I chose was the bad one.
Not sure if you want I should start another thread about the other issues I have created with the phone, but seeing as there are not many English threads out there for the Magnus SX5QC, it would be good if I could stick with this one.
In no particular order:
No Battery-Charge Animation
Mixed Up Hard Buttons.
Soft Reboot
Many thanks
(14-12-2017, 01:19 PM)ColinB OK no problem, but if you could point me in the the direction of how to flash back ROM_0 created in SPFlashTool using SPFlashTool as I cant find it anywhere. I've been through the advanced settings in SPFlashTool and I'm a bit lost.
Thanks Colin