February Discount: 48% discount on Hovatek's online training which covers Mediatek Smartphones, Smartwatches, Feature phones & Tablets. ENROLL NOW (Feb, 2019)
12-19-2017, 11:01 AM
I have downloaded the full folder of the stock rom from your provided link ([Hovatek] X510-D5110-M-Androidone-20170118). Please find I have attached some screenshots.
I have also tried using Infinix flash tool and still the same error pops up. WHAT AM I DOING WRONG.
Thanks in advance.
X
Thanks to xumahill |
12-20-2017, 07:16 AM
Any one online to assist me on the above issue??
X
Thanks to xumahill |
12-20-2017, 12:03 PM
(12-19-2017, 10:22 AM)xumahill Wrote:(12-19-2017, 08:13 AM)hovatek Wrote:See the attached above. Have done as u instructed but the error still pops up after sometime running the Flash tool.(12-18-2017, 04:50 PM)xumahill Wrote: X3non & innagee - have downloaded ([Hovatek] X510-D5110-M-Androidone-20170118) all that you have told me, but still the same error is still coming up, have used download, firmware update and download+Format all Options . The flash tool is taking almost one hour to show the error. Any other way to try?Thanks for your time.
The cause of the problem is that location (in your screenshot) is blank. This means that the files aren't loaded in SP flash tool and its not a driver thing.
The most logical explanations are that
1. The scatter file you're loading isn't in the same folder as other files.
2. You downloaded only scatter file
3. The files are named differently from what is expected in the scatter file.
Upload a screenshot of the content of your firmware folder so we see what's contained along with your scatter file. Lets start from there
Please reboot the pc and make sure to hold the volume up key when connecting the device. Keep holding it while the device is being flash.
X
Thanks to ALBA |
12-20-2017, 12:24 PM
(12-19-2017, 11:01 AM)xumahill Wrote: ... I have also tried using Infinix flash tool and still the same error pops up. WHAT AM I DOING WRONG.
Thanks in advance.
You can see this screenshot is different from the other one.
Ensure you have VCOM drivers installed and follow the sp flash tool guide at https://forum.hovatek.com/thread-159.html
A timeout error when all files are loaded points at one of two things
1. Files being too large (i.e flashing begins but ends in timeout)
2. The phone isn't being detected at all (flashing doesn't start)
Need faster replies or urgent assistance?
Try our Private Support for a one-on-one session with a Hovatek Rep. UPGRADE NOW!
X
Thanks to hovatek |
12-20-2017, 01:13 PM
I am confident the phone is being detected (the charging red light is appearing).
On the issue of the files being too large, is it advisable i flash each item at a time???
eg First i select prelooder then MBR........all the way to the last item
On the issue of the files being too large, is it advisable i flash each item at a time???
eg First i select prelooder then MBR........all the way to the last item
X
Thanks to xumahill |
12-20-2017, 02:22 PM
(12-20-2017, 01:13 PM)xumahill Wrote: I am confident the phone is being detected (the charging red light is appearing).
On the issue of the files being too large, is it advisable i flash each item at a time???
eg First i select prelooder then MBR........all the way to the last item
That's also a good idea, try doing that.
X
Thanks to innagee |
12-21-2017, 11:14 AM
(12-20-2017, 01:13 PM)xumahill Wrote: I am confident the phone is being detected (the charging red light is appearing).
On the issue of the files being too large, is it advisable i flash each item at a time???
eg First i select prelooder then MBR........all the way to the last item
Does flashing even start at all? I mean does any bar load at the bottom of Sp flash tool?
Need faster replies or urgent assistance?
Try our Private Support for a one-on-one session with a Hovatek Rep. UPGRADE NOW!
X
Thanks to hovatek |
01-02-2018, 01:25 PM
Happy new year, Sorry i went on holidays without solving my infinix. The flashing doesn't display and progress bar at all only the error message that comes after almost 45 minutes.
X
Thanks to xumahill |
01-02-2018, 07:57 PM
(01-02-2018, 01:25 PM)xumahill Wrote: Happy new year, Sorry i went on holidays without solving my infinix. The flashing doesn't display and progress bar at all only the error message that comes after almost 45 minutes.
Then its a detection issue. Your device isn't being properly detected
Need faster replies or urgent assistance?
Try our Private Support for a one-on-one session with a Hovatek Rep. UPGRADE NOW!
X
Thanks to hovatek |
01-03-2018, 09:10 AM
So what should i work on to make it detected as required.
X
Thanks to xumahill |
« Next Oldest | Next Newest »
Users browsing this thread: 1 Guest(s)