Hovatek Forum MOBILE Android I NEED STOCK FIRMWARE FOR COOLPAD 8298_M02
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


I NEED STOCK FIRMWARE FOR COOLPAD 8298_M02

I NEED STOCK FIRMWARE FOR COOLPAD 8298_M02

Pages (4): Previous 1 2 3 4 Next
hovatek
hovatek
hovatek
Administrator
49,570
20-12-2017, 11:55 AM
#21



(19-12-2017, 10:48 PM)eaz Somebody said it's not booting because of wrong PreLoader what do you think?... Because when I connect to charger phone shows Red light for like 10mins and go off and still not responding for about 15mins sọ I removed from light scared not to spoil the battery

Sent from my htc_desire_626g using Tapatalk

Try taking out and reinserting the battery. If it persists then I guess you'll need another cpb file. Its times like these that make you wish you still had that Miracle Box backup

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
eaz
eaz
eaz
Techie Member
76
20-12-2017, 03:58 PM
#22
I. Made an attempt.. I try rẹ flashing it and the same error of before S_BROM_CMD_JUMP_DA_FAIL has start again.. The Red Graph passed 100% but gave error S_BROM_CMD_JUMP_DA_FAIL ... My Question is is there any effect to the already successful flash to the Rom?... Am asking so to know if I should connect it to light a d just 4get it for some hours.... THANKS

Sent from my htc_desire_626g using Tapatalk
X3non
X3non
X3non
Recognized Contributor
22,062
20-12-2017, 05:42 PM
#23
(20-12-2017, 03:58 PM)eaz I. Made an attempt.. I try rẹ flashing it and the same error of before  S_BROM_CMD_JUMP_DA_FAIL has start again.. The Red Graph passed 100% but gave error  S_BROM_CMD_JUMP_DA_FAIL  ... My Question is is there any effect to the already successful flash to the Rom?... Am asking so to know if I should connect it to light a d just 4get it for some hours.... THANKS

Sent from my htc_desire_626g using Tapatalk

there's no need of trying to re-flash the rom again. disconnect / reconnect the battery of the device and if it still remains totally dead then its likely incompatible rom [preloader] . you'll need to search for and download another rom from a different source

you can check if these roms match your device model,
http://www.mediafire.com/file/f132wjk3g2...98_I00.zip
and
https://ia800402.us.archive.org/31/items...220416.zip
This post was last modified: 20-12-2017, 05:50 PM by X3non.
eaz
eaz
eaz
Techie Member
76
20-12-2017, 07:52 PM
#24
(20-12-2017, 05:42 PM)X3non
(20-12-2017, 03:58 PM)eaz I. Made an attempt.. I try rẹ flashing it and the same error of before  S_BROM_CMD_JUMP_DA_FAIL has start again.. The Red Graph passed 100% but gave error  S_BROM_CMD_JUMP_DA_FAIL  ... My Question is is there any effect to the already successful flash to the Rom?... Am asking so to know if I should connect it to light a d just 4get it for some hours.... THANKS

Sent from my htc_desire_626g using Tapatalk

there's no need of trying to re-flash the rom again. disconnect / reconnect the battery of the device and if it still remains totally dead then its likely incompatible rom [preloader] . you'll need to search for and download another rom from a different source

you can check if these roms match your device model,
http://www.mediafire.com/file/f132wjk3g2...98_I00.zip
and
https://ia800402.us.archive.org/31/items...220416.zip
Note 3 and Note 3 lite are 8298-100 and dey are 3Gb Ram

Mine before it gets to this stage on the phone case it's written

Coolpad 8298-A01 which spec is 2Gb Ram and 8gb Rom

The Os on it shows

Coolpad 8298-M02 when I use phone info app to check

Now when I open the phone on the Finger Flex it is labeled

8298-A01

So when it got bricked I try restoring the backup I made with Miracle failed saying bad boot or cpu

The í gó download 8298-A01 firmware and that's when I start get

S_BROM_CMD_JUMP_DA_FAIL when I got tired I dropped the phone for 2days then I have to format my Pc to correct blue screen report issue

So when I try to reflash it was successful so am just confused

When phone shows 8298-M02 and case show 8298-A01 I also checked Imei and it says 8298-A01



Sent from my htc_desire_626g using Tapatalk
hovatek
hovatek
hovatek
Administrator
49,570
21-12-2017, 12:37 PM
#25



(20-12-2017, 07:52 PM)eaz Note 3 and Note 3 lite are 8298-100 and dey are 3Gb Ram

Mine before it gets to this stage on the phone case it's written

Coolpad 8298-A01 which spec is 2Gb Ram and 8gb Rom

The Os on it shows

Coolpad 8298-M02 when I use phone info app to check

Now when I open the phone on the Finger Flex it is labeled

8298-A01

So when it got bricked I try restoring the backup I made with Miracle failed saying bad boot or cpu

The í gó download 8298-A01 firmware and that's when I start get

S_BROM_CMD_JUMP_DA_FAIL when I got tired I dropped the phone for 2days then I have to format my Pc to correct blue screen report issue

So when I try to reflash it was successful so am just confused

When phone shows 8298-M02 and case show 8298-A01 I also checked Imei and it says 8298-A01



Sent from my htc_desire_626g using Tapatalk

You'll need to search for another CPB that matches your variant then

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
eaz
eaz
eaz
Techie Member
76
22-12-2017, 10:35 AM
#26
Am just to weak now I reformat my laptop thinking this error S_BROM_CMD_JUMP_DA_FAIL will stop but failed I try using the Desktop in the sitting room but still same error I guess this connection error is from the phone not pc nore cable I have used all my Kodak Cords and use others too still error remains

Sent from my htc_desire_626g using Tapatalk
X3non
X3non
X3non
Recognized Contributor
22,062
22-12-2017, 02:04 PM
#27
(22-12-2017, 10:35 AM)eaz Am just to weak now I reformat my laptop thinking this error  S_BROM_CMD_JUMP_DA_FAIL will stop but failed I try using the Desktop in the sitting room but still same error I guess this connection error is from the phone not pc nore cable I have used all my Kodak Cords and use others too still error remains

Sent from my htc_desire_626g using Tapatalk

have you gotten a different firmware or you are still using the old firmware?
eaz
eaz
eaz
Techie Member
76
23-12-2017, 10:53 AM
#28
(22-12-2017, 02:04 PM)X3non
(22-12-2017, 10:35 AM)eaz Am just to weak now I reformat my laptop thinking this error  S_BROM_CMD_JUMP_DA_FAIL will stop but failed I try using the Desktop in the sitting room but still same error I guess this connection error is from the phone not pc nore cable I have used all my Kodak Cords and use others too still error remains

Sent from my htc_desire_626g using Tapatalk

have you gotten a different firmware or you are still using the old firmware?
I have downloaded 8298-A01 and the Note 3 lite too the Note 3 lite has everything my phone have making am having 3 Roms now 8298-M02 8298-A01 and 8298-100

Sent from my htc_desire_626g using Tapatalk
hovatek
hovatek
hovatek
Administrator
49,570
23-12-2017, 11:54 AM
#29
(23-12-2017, 10:53 AM)eaz I have downloaded 8298-A01 and the Note 3 lite too the Note 3 lite has everything my phone have making am having 3 Roms now 8298-M02 8298-A01 and 8298-100

Sent from my htc_desire_626g using Tapatalk

Lets Focus on 8298-A01 and 8298-M02 since those two were found on your hardware and software.
So you're getting S_BROM_CMD_JUMP_DA_FAIL for both

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
eaz
eaz
eaz
Techie Member
76
23-12-2017, 11:58 AM
#30



Yes

Sent from my htc_desire_626g using Tapatalk
Pages (4): Previous 1 2 3 4 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram