Hovatek Forum MOBILE Android [Please help] I WANT TO BACK UP GIONEE M6 BUT....
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


[Please help] I WANT TO BACK UP GIONEE M6 BUT....

[Please help] I WANT TO BACK UP GIONEE M6 BUT....

Pages (3): Previous 1 2 3
paeffiong
paeffiong
paeffiong
Senior Member
138
02-02-2018, 11:29 AM
#21



(02-02-2018, 11:22 AM)bben30
(02-02-2018, 08:51 AM)hovatek
(02-02-2018, 06:30 AM)bben30 i downloaded all the m6 rom at the collection none of them came close to working except Gionee M6 BBL7551GA-0103-T5506
https://mega.nz/#!A3ph1BjB!C1ECuvltO4gRf...A9cyuzy3OI which is the variant of my phone but when i tried to download via sp flash tool it said VERSION MISMATCH THE SCATTER FILE IS MT6750 AND MY PHONE IS MT6755. any help will be appreciated please

guess thats not a match also.
If the phone can still get detected in fastboot then repeat fastboot boot recovery.img and let me know if it boots into Philz

It doesn't come up anymore. Is the panel dead now?

Have just flashed the firmware posted by me?
A friend of mine is using same phone and that's the same firmware that i used on his phone.
bben30
bben30
bben30
Junior Member
22
02-02-2018, 12:20 PM
#22
(02-02-2018, 11:29 AM)paeffiong
(02-02-2018, 11:22 AM)bben30
(02-02-2018, 08:51 AM)hovatek
(02-02-2018, 06:30 AM)bben30 i downloaded all the m6 rom at the collection none of them came close to working except Gionee M6 BBL7551GA-0103-T5506
https://mega.nz/#!A3ph1BjB!C1ECuvltO4gRf...A9cyuzy3OI which is the variant of my phone but when i tried to download via sp flash tool it said VERSION MISMATCH THE SCATTER FILE IS MT6750 AND MY PHONE IS MT6755. any help will be appreciated please

guess thats not a match also.
If the phone can still get detected in fastboot then repeat fastboot boot recovery.img and let me know if it boots into Philz

It doesn't come up anymore. Is the panel dead now?

Have just flashed the firmware posted by me?
A friend of mine is using same phone and that's the same firmware that i used on his phone.

I used it yesterday, it reported mismatch
bben30
bben30
bben30
Junior Member
22
02-02-2018, 12:22 PM
#23
Quick update, I went to gionee care center and my phone has been fixed but the one I borrowed was showing brom da fail so I had to input my panel into the one I borrowed. It's working well now. When I googled the sp flash tool error it meant that the phone started too fast before SP could work on it. I want to think it's as a result of the 6 fastboot I enabled in the phone. How do I turn it off?
This post was last modified: 02-02-2018, 12:30 PM by bben30.
X3non
X3non
X3non
Recognized Contributor
22,062
02-02-2018, 03:47 PM
#24
(02-02-2018, 12:22 PM)bben30 Quick update, I went to gionee care center and my phone has been fixed but the one I borrowed was showing brom da fail so I had to input my panel into the one I borrowed. It's working well now. When I googled the sp flash tool error it meant that the phone started too fast before SP could work on it. I want to think it's as a result of the 6 fastboot I enabled in the phone. How do I turn it off?

there are different DA_FAIL errors
verify which of them you are getting then also attach a full screenshot of SPft window
try the fixes listed for the particular error @ https://www.hovatek.com/forum/thread-439.html
bben30
bben30
bben30
Junior Member
22
02-02-2018, 04:01 PM
#25



(02-02-2018, 03:47 PM)X3non
(02-02-2018, 12:22 PM)bben30 Quick update, I went to gionee care center and my phone has been fixed but the one I borrowed was showing brom da fail so I had to input my panel into the one I borrowed. It's working well now. When I googled the sp flash tool error it meant that the phone started too fast before SP could work on it. I want to think it's as a result of the 6 fastboot I enabled in the phone. How do I turn it off?

there are different DA_FAIL errors
verify which of them you are getting then also attach a full screenshot of SPft window
try the fixes listed for the particular error @ https://www.hovatek.com/forum/thread-439.html
This is the error I'm having, I can't upload SS now because of the small device I'm using *status brom cmd send da fail* I'm able to boot into recovery and I was able to copy the firmware the gionee center guy used to my flash. But it's in sp flash format. Is there a way I can make that file a flashable zip format? So I can copy it into a memory card and install via recovery? Or at least turn off the fastboot?
hovatek
hovatek
hovatek
Administrator
49,570
03-02-2018, 03:20 PM
#26
(02-02-2018, 04:01 PM)bben30 This is the error I'm having, I can't upload SS now because of the small device I'm using *status brom cmd send da fail* I'm able to boot into recovery and I was able to copy the firmware the gionee center guy used to my flash. But it's in sp flash format. Is there a way I can make that file a flashable zip format? So I can copy it into a memory card and install via recovery? Or at least turn off the fastboot?

You can convert it to a flashable zip using https://www.hovatek.com/forum/thread-20497.html but will need a custom recovery to flash.
Plus you'll need to unlock Bootloader to install the custom recovery
Could you upload the firmware that fixed your phone, Im sure others would need it too

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Pages (3): Previous 1 2 3
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram