[tyli]

stuck at boot logo

no progress showing, just a stop button.
i actually tried loading that of win 7 it rejected it, i thought i had disabled the driver signature, i will try again

Install VCOM drivers using our guide and try again

when it gets to add hardware No instruction on what to select so I choose Android - next - under manufacturer I choose media tek - have disc - browse - win7 - 64 - ok ir says not compatible

[X3non]

when it gets to add hardware No instruction on what to select so I choose Android - next - under manufacturer I choose media tek - have disc - browse - win7 - 64 - ok ir says not compatible

it doesn't seem like you are following the guide @ https://forum.hovatek.com/thread-440.html
refer to steps 3 - 6 ; it indicates what to select from "add hardware"

[tyli]

when it gets to add hardware No instruction on what to select so I choose Android - next - under manufacturer I choose media tek - have disc - browse - win7 - 64 - ok ir says not compatible

it doesn't seem like you are following the guide @ https://forum.hovatek.com/thread-440.html
refer to steps 3 - 6 ; it indicates what to select from "add hardware"

I see the error thanks

[tyli]

when it gets to add hardware No instruction on what to select so I choose Android - next - under manufacturer I choose media tek - have disc - browse - win7 - 64 - ok ir says not compatible

it doesn't seem like you are following the guide @ https://forum.hovatek.com/thread-440.html
refer to steps 3 - 6 ; it indicates what to select from "add hardware"

Thanks ... I finally installed vcom, flash tool set on upgrade, hit download and viola the progress bar Shows in 5mins got the ok sign

BUT

PHONE refused to power on no longer read with system just the connection sound coming on and off Once
I wan cry

[hovatek]

Thanks ... I finally installed vcom, flash tool set on upgrade, hit download and viola the progress bar Shows in 5mins got the ok sign

BUT

PHONE refused to power on no longer read with system just the connection sound coming on and off Once
I wan cry

Maybe the battery is drained. Leave to charge a while

[tyli]

Thanks ... I finally installed vcom, flash tool set on upgrade, hit download and viola the progress bar Shows in 5mins got the ok sign

BUT

PHONE refused to power on no longer read with system just the connection sound coming on and off Once
I wan cry

Maybe the battery is drained. Leave to charge a while

its plugged showing the charging indicator but is not showing charging Also the phone is heating up

[hovatek]

its plugged showing the charging indicator but is not showing charging Also the phone is heating up

You might need to try a different firmware

[tyli]

its plugged showing the charging indicator but is not showing charging Also the phone is heating up

You might need to try a different firmware

I'm pretty new to all this

a link for a different firmware.

Thanks guys for all the assistance so far

[X3non]

I'm pretty new to all this

a link for a different firmware.

Thanks guys for all the assistance so far

check the firmware list @ https://forum.hovatek.com/thread-15788.html ; there are two different HT50 rom build

[tyli]

Hi guys I finally found the rom with the phones build numbers and have flashed it, flashed bin, boot recovery and the rest and also upgraded didn't work

Any suggestions?