Bluboo S1 Baseband (MT6757P) unknown
Bluboo S1 Baseband (MT6757P) unknown
(26-12-2017, 04:34 PM)X3non(23-12-2017, 08:32 PM)ManiacB Format Userdata and cache doesn't take Effekt.
Now I tried to make a new backup of my working phone but again i can't mount data partition.
In the security menu of my working phone is the point encryption active. I never choose this. Is this maybe a problem?
Gesendet von meinem Bluboo S1 mit Tapatalk
your device doesnt seem to have a secro partition even from fstab
reflash the firmware you flashed initially, let your device boot to homescreen
then use this particular philz @ https://mega.nz/#!9L5wzJIS!vBSrIyqW8m487...uGxKfkZlOA
you should backup only the partitions listed below from the working device then restore onto your device, check for baseband and imei and lets know the outcome
Code:nvcfg, nvdata, nvram, protect1, protect2, seccfg
(19-03-2018, 04:51 PM)ManiacB After a lot of weeks i tried my luck again.
Installing the recovery on both phones was no problem.But i can´t backup protect1, protect2 and seccfg because they are not shown in recovery.
So i have backuped nvcfg, nvdata and nvram , no problem.
Then i have tried to restore nvdata,ok then nvram,ok but nvcfg doesn´t work. It gives an error while formatting.
After all it is still the same - unknown baseband and no Imei.....
(19-03-2018, 06:46 PM)X3non(19-03-2018, 04:51 PM)ManiacB After a lot of weeks i tried my luck again.
Installing the recovery on both phones was no problem.But i can´t backup protect1, protect2 and seccfg because they are not shown in recovery.
So i have backuped nvcfg, nvdata and nvram , no problem.
Then i have tried to restore nvdata,ok then nvram,ok but nvcfg doesn´t work. It gives an error while formatting.
After all it is still the same - unknown baseband and no Imei.....
OK, try this
download the scatter file from the attachment below
copy the scatter file into a new folder, then copy secro.img from the firmware you downloaded earlier into the same new folder
try flashing only secro
lets know if its successful and if the baseband returns
(19-03-2018, 07:22 PM)ManiacB No success... Status preloader invalid....
(20-03-2018, 05:18 PM)ManiacB OK. Here ist is.
(20-03-2018, 07:07 PM)X3non(20-03-2018, 05:18 PM)ManiacB OK. Here ist is.
delete all files from the new folder
copy all files except scatter file from the firmware folder into the new folder
copy the modified scatter file in my previous post into the new folder as well
then retry flashing all the files in the new folder
if it doesnt work, try flashing using SPft v5.1520 @ https://www.hovatek.com/forum/thread-13970.html
(22-03-2018, 06:54 PM)ManiacB i followed you instruction above and flashed with spft 15.804 .No error but same result : Baseband unknown no Imei
after that i have tried with spft 5.1520 but i can´t choose scatter file (scatter load invalid (8417) )
(23-03-2018, 11:40 AM)hovatek(22-03-2018, 06:54 PM)ManiacB i followed you instruction above and flashed with spft 15.804 .No error but same result : Baseband unknown no Imei
after that i have tried with spft 5.1520 but i can´t choose scatter file (scatter load invalid (8417) )
Seems we need to find out your phone model's mount points. Maybe there's a partition missing in the scatter file. This or your phone is of a different variant and needs a specific firmware.
If either phone is rooted, find out its mount points using the guide at https://www.hovatek.com/forum/thread-11203.html and attach a full screenshot of the output
(23-03-2018, 05:30 PM)ManiacB Hi! Here is the screenshot.
adb shell
su
dd if=/yourMountingPoint of=/yourDestination/partitionType
e.g
dd if=/dev/block/mmcblk0p12 of=/sdcard/secro.img
adb shell
su
dd if=/yourDestination/partitionType of=/yourMountingPoint
e.g
dd if=/sdcard/secro.img of=/dev/block/mmcblk0p12