Hovatek Forum MOBILE Android Gionee ctrl v4s stuck at boot logo!
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


Gionee ctrl v4s stuck at boot logo!

Gionee ctrl v4s stuck at boot logo!

Pages (3): Previous 1 2 3 Next
Soumitra
Soumitra
Soumitra
Newbie
2
04-04-2018, 04:32 PM
#11



It's my phone's details when I used factory mode method

BB Chip : MT6582
MS Board : V4S
Build Time : Wed Apr 20 13:20
Kernel Ver. :3.10.54+(android@ BIANYI-1
SMP PREEMPT Wed Apr 20:13
Android Ver. : 5.0.2
SW version. : ALPS.L0.MP2.V1_G
Custom Build Vernon. : Unknown
IMEI1:865747021976089
IMEI2:865747022476089
Modem Very. : MOLY.WR8.W1449.M
Bar Code:
855II10140901002446
PP10P
Soumitra
Soumitra
Soumitra
Newbie
2
04-04-2018, 04:38 PM
#12
(04-04-2018, 12:48 PM)Soumitra Yadav
Quote:whats the error message? [attach a screenshot]
also try other methods of retrieving build number
for drivers, see
The error is now solved.thnx for the drivers..I installed them and pressed the power key on my phone it gives following information

Welcome to use Miracle Box
(World's First Fuzzy Logic Based Tool)
Update:16-01-09
Connected OK.
Fuzzy Logic Method is very safe and reliable !
1. Power Off Phone , Remove Battery, Insert Battery Back
2. Insert USB cable. In some cases Required Hold BootKey
3. Use Miracle Boot Key In cases Boot key not Find
4. Battery Should be Charged more then 50%
Open Port Err:
*** the Port be occupied.
Waiting for USB Port...
Waiting for USB Port...
Set MediaTek PreLoader USB VCOM Port (COM18)
Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU: MT6582 SW:0001 Ver: CA01
Downloading Boot8 ...
EMMC Size: 0x01D2000000
Flash Type: EMMC
INT/EXT RAM Size: 0x0+0x0
Reading infr(EMMC)...
version:5.0.2
id:V4S
model:V4S
brand:GIONEE
manufacturer:GIONEE
PRELOADER BaseAddr:0x0 Size:0x880000
MBR BaseAddr:0x880000 Size:0x80000
EBR1 BaseAddr:0x900000 Size:0x80000
PRO_INFO BaseAddr:0x980000 Size:0x300000
NVRAM BaseAddr:0xC80000 Size:0x500000
PROTECT_F BaseAddr:0x1180000 Size:0xA00000
PROTECT_S BaseAddr:0x1B80000 Size:0xA00000
SECCFG BaseAddr:0x2580000 Size:0x20000
UBOOT BaseAddr:0x25A0000 Size:0x60000
BOOTIMG BaseAddr:0x2600000 Size:0x1000000
RECOVERY BaseAddr:0x3600000 Size:0x1000000
SEC_RO BaseAddr:0x4600000 Size:0x40000
MISC BaseAddr:0x4640000 Size:0x80000
LOGO BaseAddr:0x46C0000 Size:0x300000
EBR2 BaseAddr:0x49C0000 Size:0x80000
EXPDB BaseAddr:0x4A40000 Size:0xA00000
SPDATA BaseAddr:0x5440000 Size:0x800000
ANDROID BaseAddr:0x5C40000 Size:0x80000000
CACHE BaseAddr:0x85C40000 Size:0x17800000
USRDATA BaseAddr:0x9D440000 Size:0xC0000000
FAT BaseAddr:0x15D440000 Size:0x73F40000
BMTPOOL BaseAddr:0xFFFF0000 Size:0x0
>>Done.

It's my phone's details when I used factory mode method

BB Chip : MT6582
MS Board : V4S
Build Time : Wed Apr 20 13:20
Kernel Ver. :3.10.54+(android@ BIANYI-1
SMP PREEMPT Wed Apr 20:13
Android Ver. : 5.0.2
SW version. : ALPS.L0.MP2.V1_G
Custom Build Verno. : Unknown
IMEI1:865747021976089
IMEI2:865747022476089
Modem Very. : MOLY.WR8.W1449.M
Bar Code:
855II10140901002446
PP10P
X3non
X3non
X3non
Recognized Contributor
22,062
04-04-2018, 06:13 PM
#13
(04-04-2018, 12:48 PM)Soumitra Yadav ...
 CACHE  BaseAddr:0x85C40000  Size:0x17800000
 USRDATA  BaseAddr:0x9D440000  Size:0xC0000000
 FAT  BaseAddr:0x15D440000  Size:0x73F40000
 BMTPOOL  BaseAddr:0xFFFF0000  Size:0x0
>>Done.

none of the methods displayed the build number so you'll have to try different V4s roms
dump the firmware of your device in scatter file format using the guide @ https://www.hovatek.com/forum/thread-13347.html
download and flash V4S rom @ https://www.hovatek.com/forum/thread-389.html
Soumitra Yadav
Soumitra Yadav
Soumitra Yadav
Enthusiastic Member
10
05-04-2018, 02:30 AM
#14
(04-04-2018, 06:13 PM)X3non
(04-04-2018, 12:48 PM)Soumitra Yadav ...
 CACHE  BaseAddr:0x85C40000  Size:0x17800000
 USRDATA  BaseAddr:0x9D440000  Size:0xC0000000
 FAT  BaseAddr:0x15D440000  Size:0x73F40000
 BMTPOOL  BaseAddr:0xFFFF0000  Size:0x0
>>Done.

none of the methods displayed the build number so you'll have to try different V4s roms
dump the firmware of your device in scatter file format using the guide @ 
download and flash V4S rom @ 
I already have the v4s rom ..It contains the sp flash tool so I have to just flash my phone with this tool or any thing else..??
Is dumping the firmware of my device in scatter file format using the guide u provided necessary??
Can flashing with the v4s rom hard brick my phone??
Is it recoverable??
If not..Then please provide safe and secure method..
This post was last modified: 05-04-2018, 02:31 AM by Soumitra Yadav.
Soumitra Yadav
Soumitra Yadav
Soumitra Yadav
Enthusiastic Member
10
05-04-2018, 02:40 AM
#15



It's my phone's details when I used factory mode method

BB Chip : MT6582
MS Board : V4S
Build Time : Wed Apr 20 13:20
Kernel Ver. :3.10.54+(android@ BIANYI-1
SMP PREEMPT Wed Apr 20:13
Android Ver. : 5.0.2
SW version. : ALPS.L0.MP2.V1_G
Custom Build Verno. : Unknown
IMEI1:865747021976089
IMEI2:865747022476089
Modem Very. : MOLY.WR8.W1449.M
Bar Code:
855II10140901002446
PP10P

Will this help u??
hovatek
hovatek
hovatek
Administrator
49,570
05-04-2018, 11:13 AM
#16
(05-04-2018, 02:30 AM)Soumitra Yadav I already have the v4s rom ..It contains the sp flash tool so I have to just flash my phone with this tool or any thing else..??
Is dumping the firmware of my device in scatter file format using the guide u provided necessary??
Can flashing with the v4s rom hard brick my phone??
Is it recoverable??
If not..Then please provide safe and secure method..

The reason you were asked to backup is so you have a safety net incase the v4s rom bricks your phone so go ahead with the backup

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Soumitra Yadav
Soumitra Yadav
Soumitra Yadav
Enthusiastic Member
10
05-04-2018, 12:23 PM
#17
(05-04-2018, 11:13 AM)hovatek
(05-04-2018, 02:30 AM)Soumitra Yadav I already have the v4s rom ..It contains the sp flash tool so I have to just flash my phone with this tool or any thing else..??
Is dumping the firmware of my device in scatter file format using the guide u provided necessary??
Can flashing with the v4s rom hard brick my phone??
Is it recoverable??
If not..Then please provide safe and secure method..

The reason you were asked to backup is so you have a safety net incase the v4s rom bricks your phone so go ahead with the backup
So I have to backup then flash my zip file to phone using sp flash tool
xerxes
xerxes
xerxes
Senior Member
8,355
05-04-2018, 03:29 PM
#18
(05-04-2018, 12:23 PM)Soumitra Yadav So I have to backup then flash my zip file to phone using sp flash tool

You don't flash zip file using sp flash tool, only scatter file format firmware can be flashed using sp flash tool. If the firmware you've downloaded is zipped then extract using winrar or winzip.
This post was last modified: 05-04-2018, 03:30 PM by xerxes.
Soumitra Yadav
Soumitra Yadav
Soumitra Yadav
Enthusiastic Member
10
06-04-2018, 02:16 AM
#19
(05-04-2018, 03:29 PM)innagee
(05-04-2018, 12:23 PM)Soumitra Yadav So I have to backup then flash my zip file to phone using sp flash tool

You don't flash zip file using sp flash tool, only scatter file format firmware can be flashed using sp flash tool. If the firmware you've downloaded is zipped then extract using winrar or winzip.

I know I wrote zip by mistake..Sorry ..
So I am going to flash scatter files on my phone any advice or tips??
xerxes
xerxes
xerxes
Senior Member
8,355
06-04-2018, 09:26 AM
#20



(06-04-2018, 02:16 AM)Soumitra Yadav I know I wrote zip by mistake..Sorry ..
So I am going to flash scatter files on my phone any advice or tips??

See https://www.hovatek.com/forum/thread-159.html for how to use SP Flash tool.
Pages (3): Previous 1 2 3 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram