[Please help] I am having problem flashing my leagoo kiicca power
[Please help] I am having problem flashing my leagoo kiicca power
(10-05-2018, 02:49 PM)X3non(10-05-2018, 09:18 AM)sunkyday Bro I try flashing the rom 1 after the other, everything installed expect system.img and userdata. I think that is where the problem comes from. Is there anything I should do about that
whats the current state of the phone? [totally dead or stuck at boot]
can you boot into recovery mode?
(10-05-2018, 06:04 PM)sunkyday ...
i can't boot the phone into recovery or factory mode. so bro, what should i do?
(10-05-2018, 02:49 PM)X3non(10-05-2018, 09:18 AM)sunkyday Bro I try flashing the rom 1 after the other, everything installed expect system.img and userdata. I think that is where the problem comes from. Is there anything I should do about that
whats the current state of the phone? [totally dead or stuck at boot]
can you boot into recovery mode?
(11-05-2018, 12:45 AM)X3non(10-05-2018, 06:04 PM)sunkyday ...
i can't boot the phone into recovery or factory mode. so bro, what should i do?
where you able to format the phone using the format tab in SPft?
if no then format all except bootloader then retry flashing
if you still get the same error then try flashing a different rom build
(11-05-2018, 04:44 PM)X3non(11-05-2018, 05:23 AM)sunkyday I have downloaded the 2 firmware in this website and I still get the same error
the two roms you tried flashing both can't go beyond system.img?
did you try booting into recovery mode after flashing the partitions you could flash from both roms?
(11-05-2018, 06:12 PM)sunkyday Yes it do boot to recovery mode, but when I wipe the phone it goes back to the beginning where the recovery mode won't work again. Or do you want you want me to flash the recovery mode to phone
(10-05-2018, 09:18 AM)sunkyday(10-05-2018, 07:52 AM)hovatek(09-05-2018, 05:37 PM)sunkyday Error 2004
Message: BROM ERROR : S_FT_DOWNLOAD_FAIL (2004)
Meaning: There was an interruption in the communication between SP flash tool and the device
Solution:
1 Take out and reinsert the battery
2 Try using a different USB cord, port and PC
3 Right-click flash_tool.exe > Select Properties > Select Compatibility > Set to Windows XP Service Pack 3 > Click Apply > Click OK > Run SP flash tool as Administrator
4 Try a different USB cord
5 Try a different port on the PC or another PC
6 Ensure the battery is well changed and inside the switched off phone before connecting to PC for flashing
Bro I have tried this but it still didn't work. What should I do next?
Your screenshot says error 4008
Error 4008
Message: BROM ERROR : S_FT_DOWNLOAD_FAIL (4008)
Meaning: SP Flash tool encountered an error while attempting to flash files
Solution:
1 Ensure the battery is in the phone and the phone is switched off before connecting for flashing
2 Try using a higher version of SP flash tool
3 Change the USB cord and port or PC
4 Use the format option then download in SP flash tool
This method is similar to the previous 1 it didn't work.
Bro I try flashing the rom 1 after the other, everything installed expect system.img and userdata. I think that is where the problem comes from. Is there anything I should do about that