Cant restore IMEI on my Oukitel C5
Cant restore IMEI on my Oukitel C5
(07-06-2018, 09:46 AM)ccrqc357(28-05-2018, 11:37 AM)hovatek(27-05-2018, 07:11 PM)ccrqc357 MTK 6580 and Android 7.0
The phone is a Oukitel C5
Confirm if your phone has a valid baseband.
If it does then try other methods
BTW, I don't think you need to hold any button provided you've installed VCOM drivers
Im getting EnterApMode[]:Metal Result default fail
The phone gets into meta mode (boot logo) but wont com handshake
(07-06-2018, 02:15 PM)innageeYes and I get null IMEI(07-06-2018, 09:46 AM)ccrqc357(28-05-2018, 11:37 AM)hovatek(27-05-2018, 07:11 PM)ccrqc357 MTK 6580 and Android 7.0
The phone is a Oukitel C5
Confirm if your phone has a valid baseband.
If it does then try other methods
BTW, I don't think you need to hold any button provided you've installed VCOM drivers
Im getting EnterApMode[]:Metal Result default fail
The phone gets into meta mode (boot logo) but wont com handshake
Is your device rooted?
have you tried GSM Aladdin method?
(07-06-2018, 10:28 AM)Yohanan Piadoso Bro no need for further step you just need to try all tweaks the 1 that work is all the best
just check weather yours base is ok in setting about
if is ok root the phone and use chameleon apk App
work for me 100%
all thanks goes to hovetek
(28-05-2018, 11:37 AM)hovatekThe drivers seem to be working ,(27-05-2018, 07:11 PM)ccrqc357 MTK 6580 and Android 7.0
The phone is a Oukitel C5
Confirm if your phone has a valid baseband.
If it does then try other methods
BTW, I don't think you need to hold any button provided you've installed VCOM drivers
(08-06-2018, 05:48 PM)ccrqc357 The drivers seem to be working ,
Ive flash the ROM via SPFlash Tool with those drivers .
The IMEI now has is a random number ,
Ive used SN Tool before and I remember facing the same problem until I tried different key combination in order to start com handshake.
Ive tried everything now nothing works.
The MAUI tool wont connect either and the Charmaleon app give me a null IMEI,
With engineer mode method the IMEI stays the same.
I have to mention that I had updated previusly to a new ROM version that required Clean install via SP Flash Tool,
Now Ive recovered to the old version but the preloader was messed up so Ive used cleared all method (in SP FLASH TOOL)
and reflash the old firmware incuding the preloader ,
Now Ive stuck with no signal due to this problem