[Please help] My Tecno L9Plus Always boot to PhilZ Touch Recovery
[Please help] My Tecno L9Plus Always boot to PhilZ Touch Recovery
(13-09-2018, 06:08 PM)innagee(13-09-2018, 04:41 PM)WhiteDragon(13-09-2018, 01:52 PM)innagee(13-09-2018, 12:17 PM)WhiteDragon(13-09-2018, 10:45 AM)innagee You will need to flash the Stock ROM.
What's the phone's build no.? refer to https://www.hovatek.com/forum/thread-16005.html
USB Not Recognized could be a charging port, usb port or drivers issue.
Were you able to transfer files from your phone to pc before this issue?
Did you install VCOM drivers? see https://www.hovatek.com/forum/thread-440.html
Also, try different usb cable and ports.
The phone build number is L9Plus-H8011A-N-180320V426... Also, i still have the previous stock rom i backed up, but the problem now is that: system is not detecting the phone.
while the phone is connected to pc long press the power button till the phone power off, miracle or sp flash tool will detect the phone or disconnect/reconnect the battery.
Anytime I connected it to system, it power itself on immediately... Even if I put it off, the phone will come up agaag. Is there no way I can port the stock rom through the recovery mode by Zip file... Or how can I remove the PhilZ Touch Recovery?
Also, my miracle-box is bringing forth the following error...
Open Port Err:
*** the port be occupied
It will later bring miracle box has stopped WORKING after clicking START....
NOTE: I have downloaded and installed the SPL PORT MAKING EXE FOR ALADDIN
you can create flashable zip using stock boot.img and system.img using the guide @ https://www.hovatek.com/forum/thread-20497.html and flash via philz recovery.
(14-09-2018, 09:28 AM)hovatek(13-09-2018, 12:11 PM)WhiteDragon the hone was rooted on 22nd of June @2018 by following this your thread https://www.hovatek.com/forum/thread-18027.html
the confirmation is here on my thread.... https://www.hovatek.com/forum/thread-23168.html
Try reflashing superSU in Philz. If your philz detects SD card then copy the zip to sd card and flash
(14-09-2018, 06:21 PM)WhiteDragon Sigh!... I followed the procedure one after the other and I got a final Flashable zip rom... But the problem I encountered when flashing it is as follows,,,,
...
Now, I tried using 2(Manual ) to set the mount point.... But alas, I don't know the mount point. I followed the tutorial on how to get the mount point... There I realised it need usb debugging and my phone is not been detected by my system... It always powered the phone even without ba3...
(14-09-2018, 06:21 PM)WhiteDragon Sigh!... I followed the procedure one after the other and I got a final Flashable zip rom... But the problem I encountered when flashing it is as follows,,,,
dev/block/platform/mtk-msdc.0/11120000.msdc0/by-name/system...
No such file or directory. ...
Now, I tried using 2(Manual ) to set the mount point.... But alas, I don't know the mount point. I followed the tutorial on how to get the mount point... There I realised it need usb debugging and my phone is not been detected by my system... It always powered the phone even without ba3...
(22-09-2018, 03:54 PM)WhiteDragon Thank God... I successfully bring my phone back to life by leaving it dead for many days... I later put another Variant stock rom on it using Miracle... To my surprise, it happened to be the one that came with the phone when i bought it some months ago... (With Ultra Power Mode)...
Thanks Team Hovatek