[Please help] MOTO XT 1773
[Please help] MOTO XT 1773
(30-10-2018, 05:00 PM)ov3r5y5t3m Hello ... After performing the flash procedure by SP Tools using the Stock Rom on my motorola XT1773 it did not turn on. Now you just connect and reconnect to the usb and when you try to use SP Tools again, it's just the DA download. I have already made all possible options regarding error (4001) and nothing. A help would be welcome!
(30-10-2018, 06:30 PM)innagee(30-10-2018, 05:00 PM)ov3r5y5t3m Hello ... After performing the flash procedure by SP Tools using the Stock Rom on my motorola XT1773 it did not turn on. Now you just connect and reconnect to the usb and when you try to use SP Tools again, it's just the DA download. I have already made all possible options regarding error (4001) and nothing. A help would be welcome!
The phone required Download Agent because it has a secured boot.
BTW, What's wrong with the phone and how did the problem start?
Were you able to successfully flash the phone using any firmware?
Also try the DA for your model @ https://www.hovatek.com/forum/thread-23365.html
Sent from my M5 mini using Hovatek Mobile
(31-10-2018, 12:27 AM)ov3r5y5t3m It was working normal ... was with the bootloader unlocked ... and with TWRP ... I wanted to put the original firmware of it: (RETAIL_NMA26.42_11_3_subsidy_UNLOCKED_model_LATAMDS_CFC) .. I spent it using forum SP Tools + a DA here (Motorola XT1760, XT1761, XT1762, XT1763, XT1766, XT1770, XT1771, XT1772, XT1773) ... and it was usually until successful completion. Then as I said, I was restarting to finish the installation and did not call anymore, is giving this error. Begin the DA procedure and go there.
(31-10-2018, 09:44 AM)X3non(31-10-2018, 12:27 AM)ov3r5y5t3m It was working normal ... was with the bootloader unlocked ... and with TWRP ... I wanted to put the original firmware of it: (RETAIL_NMA26.42_11_3_subsidy_UNLOCKED_model_LATAMDS_CFC) .. I spent it using forum SP Tools + a DA here (Motorola XT1760, XT1761, XT1762, XT1763, XT1766, XT1770, XT1771, XT1772, XT1773) ... and it was usually until successful completion. Then as I said, I was restarting to finish the installation and did not call anymore, is giving this error. Begin the DA procedure and go there.
after flashing successfully,
is the phone totally dead OR it's just stuck on bootlogo or bootloop?
have you tried disconnecting / reconnecting the battery?
(31-10-2018, 02:27 PM)ov3r5y5t3m Totally dead ... after successfully passing the rom ... died ... recognizes only in USB ...
Yes ... I also tried to remove the battery ...
(31-10-2018, 04:53 PM)hovatek(31-10-2018, 02:27 PM)ov3r5y5t3m Totally dead ... after successfully passing the rom ... died ... recognizes only in USB ...
Yes ... I also tried to remove the battery ...
Whatever you do, DO NOT format or select firmware upgrade in SP flash tool.
1. Have you tried flashing a different firmware?
2. The battery might be drained. Try connecting to charger while holding the power button
(31-10-2018, 07:49 PM)ov3r5y5t3m The firmware I used was this: (NICKLAUS_RETAIL_NMA26.42_11_3_subsidy_UNLOCKED_model_LATAMDS_CFC.xml)