Hovatek Forum MOBILE Android Tecno Pouvoir 2 dead. Pls help
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


Tecno Pouvoir 2 dead. Pls help

Tecno Pouvoir 2 dead. Pls help

Pages (2): 1 2 Next
s.m
s.m
s.m
Senior Member
127
11-11-2018, 07:45 AM
#1



I tried rooting my Pouvoir 2 following your thread using magisk manager to obtain patch boot.img , after coping to system, already downloaded stockrom for the phone from this site. I tried to flash the boot.img  with spflash tool..after loading scatter file and click on download, it detected my phone (checked device manager), download didn't start, and my phone already dead, couldn't power on again. I tried another system, another cord, reinstalled vcom drivers following the procedures given by the site but still the same.it will detect the phone but download won't start.This is not my first time of flashing phone with sp flash tool successfuly. Pls, help.
X3non
X3non
X3non
Recognized Contributor
22,062
11-11-2018, 12:49 PM
#2
(11-11-2018, 07:45 AM)s.m I tried rooting my Pouvoir 2 following your thread using magisk manager to obtain patch boot.img , after coping to system, already downloaded stockrom for the phone from this site. I tried to flash the boot.img  with spflash tool..after loading scatter file and click on download, it detected my phone (checked device manager), download didn't start, and my phone already dead, couldn't power on again. I tried another system, another cord, reinstalled vcom drivers following the procedures given by the site but still the same.it will detect the phone but download won't start.This is not my first time of flashing phone with sp flash tool successfuly. Pls, help.

Disconnect / reconnect the battery of the phone OR keep charging till the phone shows charging sign. Refer to https://www.hovatek.com/forum/thread-808.html

When the phone finally comes on, 
Download custom DA for your model at https://www.hovatek.com/forum/thread-23243.html then repeat flashing patched notb

Whatever you do, don't format your phone or flash using firmware upgrade in SPft
s.m
s.m
s.m
Senior Member
127
13-11-2018, 10:25 PM
#3
Thank you boss. I have been charging (at worst 8hrs a day) the phone since sunday, till now couldnt power on. What do you think?
X3non
X3non
X3non
Recognized Contributor
22,062
14-11-2018, 08:25 AM
#4
(13-11-2018, 10:25 PM)s.m Thank you boss. I have been charging (at worst 8hrs a day) the phone since sunday, till now couldnt power on. What do you think?

Best you loosen the phone or look for someone who can then disconnect / reconnect the battery then using the charging method (you could spend days following charging method and there's no estimated time)

If you still want to continue charging, try holding vol down or up button before connecting the charger (do this at random intervals)
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
14-11-2018, 08:53 AM
#5



Or try this, it works for me 4/5 of the time. Hold the power button for a stretch of 2 mins try 5 times.
s.m
s.m
s.m
Senior Member
127
15-11-2018, 08:50 AM
#6
I powered it on by disconnecting and reconnecting d battery, tried flashing again, downloaded d DA file, followed d procedure, uninstalled and reinstalled Vcom drivers, tried flashing d patched file... PHONE went dead again. Don't you think I should try another method?

Sent from my TECNO LA7 using Hovatek Mobile
X3non
X3non
X3non
Recognized Contributor
22,062
15-11-2018, 10:06 AM
#7
(15-11-2018, 08:50 AM)s.m I powered it on by disconnecting and reconnecting d battery, tried flashing again, downloaded d DA file, followed d procedure, uninstalled and reinstalled Vcom drivers, tried flashing d patched file... PHONE went dead again. Don't you think I should try another method?

Sent from my TECNO LA7 using Hovatek Mobile

SP flash tool is my preferred method since unlocking bootloader isn't required (might encounter orange boot error after unlocking) and you get acquainted to using SPft

If you want, you can flash using fastboot. Flashing using fastboot method is in explained in the magisk root thread
s.m
s.m
s.m
Senior Member
127
15-11-2018, 03:15 PM
#8
Yh. Then maybe I won't flash again. Sp flash tool is my best option too

Sent from my TECNO LA7 using Hovatek Mobile
s.m
s.m
s.m
Senior Member
127
15-11-2018, 06:53 PM
#9
Or is the build number the problem?
My phone BN: LA7-H393A-O-181011V172
Stock rom downloaded build no from hovatek:
LA7-H393A-O-180511V96

Sent from my TECNO LA7 using Hovatek Mobile
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
15-11-2018, 10:46 PM
#10



(15-11-2018, 06:53 PM)s.m Or is the build number the problem?
My phone BN: LA7-H393A-O-181011V172
Stock rom downloaded build no from hovatek:
LA7-H393A-O-180511V96

Sent from my TECNO LA7 using Hovatek Mobile
Its best you use the boot.img you got from a backup of your phone's current firmware
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram