Tecno F3 when flashed without userdata , when booted the userdata is still not wiped
Tecno F3 when flashed without userdata , when booted the userdata is still not wiped
(29-11-2018, 02:32 PM)shelly after flashing my tecno f3 with its backed up firmware created with Miraclebox , the userdata is still not wiped even though i tried all possible means to brick the phone and unbrick it , still it does not flash...
please any insight on this problem , is there a new security causing these ????????????
(29-11-2018, 10:48 PM)X3non(29-11-2018, 02:32 PM)shelly after flashing my tecno f3 with its backed up firmware created with Miraclebox , the userdata is still not wiped even though i tried all possible means to brick the phone and unbrick it , still it does not flash...
please any insight on this problem , is there a new security causing these ????????????
userdata wont just disappear unless you purposefully format that partition.
here's what you just did, you made backup using miracle box > flashed all partitions except userdata > the outcome is right where you started cause nothing has changed
if you want to format userdata partition, you can factory reset the phone in settings. now i'm not sure why you are trying to brick your phone but its really best not to be messing around with secure boot phones
if you want to verify if your backup really is working, you've already verified the files are working as you flashed and didn't encounter a brick [if something was wrong with the backup then your phone would have been bricked by now]. then to verify if userdata backup is OK, factory reset the phone then flash userdata > the outcome should restore all your files, apps and settings just the way it was before you made the backup if the userdata backup is OK
(01-12-2018, 01:58 AM)EMMANUS From the response you have given, it points to a faulty emmc chip.
Just to be sure, you can get the DA for your phone from here https://www.hovatek.com/forum/thread-23243.html, the scatter file from your backup, and the guide here https://www.hovatek.com/forum/thread-21638.html to format only userdata partition.
(01-12-2018, 02:35 PM)shelly Tried it , downloaded the custom Da for Tecno pop 1, wiped userdata .... Tried also format all + download with the custom Da and loaded the rom .
Still I quote it didn't work !!! User data still present ...
Or is there a specific sp flash tool to flash Tecno pop 1....
Sent from my SM-N9005 using Hovatek Mobile