[Please help] tecno boom j8
[Please help] tecno boom j8
(07-12-2018, 01:14 PM)p3nt3st Hi , have try to flash tecno boom j8 and i got error not enough space . what i didn't tick the user data and try flas again , went true after trying to switch on , not turning on
(07-12-2018, 06:46 PM)innagee(07-12-2018, 01:14 PM)p3nt3st Hi , have try to flash tecno boom j8 and i got error not enough space . what i didn't tick the user data and try flas again , went true after trying to switch on , not turning on
Try disconnecting/reconnecting the phone's battery and power on or plug to charger for few hours and see the outcome.
Also, it would help to know what's wrong with the phone before flashing it?
Do you know the phone's original build no and did you flash the firmware that match the phone's build?
(08-12-2018, 01:24 PM)p3nt3st Hi, the problem was password not recognized so, i flash it
the first error was no space so i dis-tick userdata to flash went true but phone didn't on
(08-12-2018, 02:52 PM)hovatek(08-12-2018, 01:24 PM)p3nt3st Hi, the problem was password not recognized so, i flash it
the first error was no space so i dis-tick userdata to flash went true but phone didn't on
1. Try disconnecting/reconnecting the phone's battery and power on or plug to charger for few hours and see the outcome.
2. Do you know the phone's original build no ?
3. How many different Tecno J8 firmware have you tried flashing?
====
hi,
1. i'm doing now .
2. no
3. only 1
(08-12-2018, 03:28 PM)p3nt3st(08-12-2018, 02:52 PM)hovatek
(08-12-2018, 01:24 PM)p3nt3st
Hi, the problem was password not recognized so, i flash it
the first error was no space so i dis-tick userdata to flash went true but phone didn't on
1. Try disconnecting/reconnecting the phone's battery and power on or plug to charger for few hours and see the outcome.
2. Do you know the phone's original build no ?
3. How many different Tecno J8 firmware have you tried flashing?
====
hi,
1. i'm doing now .
2. no
3. only 1
(08-12-2018, 05:30 PM)innagee(08-12-2018, 03:28 PM)p3nt3st(08-12-2018, 02:52 PM)hovatek(08-12-2018, 01:24 PM)p3nt3st Hi, the problem was password not recognized so, i flash it
the first error was no space so i dis-tick userdata to flash went true but phone didn't on
1. Try disconnecting/reconnecting the phone's battery and power on or plug to charger for few hours and see the outcome.
2. Do you know the phone's original build no ?
3. How many different Tecno J8 firmware have you tried flashing?
====
hi,
1. i'm doing now .
2. no
3. only 1
Let's know the outcome of disconnection/reconnection of the battery and charging.
Sent from my M5 mini using Hovatek Mobile
hi, nothing come out of , still the same status.
I'm now trying again to flash again.
(10-12-2018, 09:45 AM)p3nt3st yes i did disconnect all but still same status