[Please help] FLASHED WRONG PRELOADER.BIN phone wont come up or get detected by SP Flash Tool
[Please help] FLASHED WRONG PRELOADER.BIN phone wont come up or get detected by SP Flash Tool
(25-01-2019, 09:01 PM)steel I have a tecno camon cm ca6, it was stuck on camon logo and i managed to fix it by flashing with SP flash tool using files from a ROM. Detected that it had invalid imei and unknown baseband and decided to flash the correct files to fix the baseband issue first but mistakenly flashed a wrong preloader file. The device doesnt charge or come on. It is only detected as MediaTek USB Port. SP flash tool doesnt detect it so as to flash another preloader. Pleas help!
(25-01-2019, 09:01 PM)steel I have a tecno camon cm ca6, it was stuck on camon logo and i managed to fix it by flashing with SP flash tool using files from a ROM. Detected that it had invalid imei and unknown baseband and decided to flash the correct files to fix the baseband issue first but mistakenly flashed a wrong preloader file. The device doesnt charge or come on. It is only detected as MediaTek USB Port. SP flash tool doesnt detect it so as to flash another preloader. Pleas help!
(26-01-2019, 01:29 PM)steel The device has a non-removable battery.
(26-01-2019, 01:31 PM)steel Tried that too. It only gets detected as mediatek USB PORT and flash tool doesnt flash to it
(26-01-2019, 03:45 PM)innagee(26-01-2019, 01:29 PM)steel The device has a non-removable battery.
You'll have to disassemble the phone to get to the battery.
(26-01-2019, 01:31 PM)steel Tried that too. It only gets detected as mediatek USB PORT and flash tool doesnt flash to it
Try manually updating the drivers using the method @ https://www.hovatek.com/forum/thread-16839.html
(27-01-2019, 06:24 PM)EMMANUS You may damage it if you're not careful while disconnecting the battery. If you're not good or skilled at it, then take it to a technician.
Which files are you trying to flash now?
If the files that had network issue contain preloader, I suggest you flash it back.
If you're flashing with the correct preloader, it should be successful.
Hold volume button when connecting the cable.
maybe I’d try this. Not sure what build it is so i got all 3 preloaders for the 3 builds. Tried to flash them 1 after the other. Still doesnt work. I think it’s because it is detected as mediatek usb port and not vcom or preloder
(28-01-2019, 05:07 AM)steel maybe I’d try this. Not sure what build it is so i got all 3 preloaders for the 3 builds. Tried to flash them 1 after the other. Still doesnt work. I think it’s because it is detected as mediatek usb port and not vcom or preloder