verykool s6005 cyprus ii stock rom assistance
verykool s6005 cyprus ii stock rom assistance
(26-01-2019, 09:22 AM)X3non(25-01-2019, 12:42 PM)okychris I did flash the preloader of similar device with its scatter file and it went 100% okay but no power.
secondly i did the entire rom using similiar device's preloader and scatter text file since I already used both in the first experiment (preloader still been detected) it also flash 100% okay but still no power.
you were not supposed to flash the files from the similar device. since you already have stock rom
use the scatter file from the similar device to flash the files from the stock rom of your device
i.e copy the scatter file from the similar device rom into the folder location of your stock rom (replace the old scatter file that gives an error message when selected in SP flash tool)
(23-01-2019, 03:31 PM)EMMANUS What I gather is that you have formatted your phone using sp flash tool,and phone is totally dead.thanks. I have done that and went smootly. flashing was 100% okay but no power.
The firmware info you attached is empty.
Try flashing using the similar scatter file, then tick preloader.
(26-01-2019, 12:51 PM)okychris I did not not flash the files of similar device. i mean my own device file was flashed 100% when i applied the method of flashing with similar device's preloader. My device firmware was the rom applied but similar device's preloader, scatter txt file and device file info was the borrowed one used.
And i must express my gratitude X3non and the rest of you out there for your massive contribution. i really do appreciate. thanks a lot
(28-01-2019, 10:13 AM)X3non(26-01-2019, 12:51 PM)okychris I did not not flash the files of similar device. i mean my own device file was flashed 100% when i applied the method of flashing with similar device's preloader. My device firmware was the rom applied but similar device's preloader, scatter txt file and device file info was the borrowed one used.
And i must express my gratitude X3non and the rest of you out there for your massive contribution. i really do appreciate. thanks a lot
i remember now that you mentioned something about the preloader from the original stock rom been corrupt just like the scatter file.
try disconnecting / reconnecting the battery of the phone, if its still dead then it means the preloader from the similar device isnt compatible (reason why the phone's still dead)
the best you could do at this point will be to look for a working phone same model as yours to take a full firmware backup from then flash yours
you could also consider trying; (no high hopes though)
mailing the verykool support, see if they can help with a link to the firmware
trying firmwares for closer verykool models such as the S6004 and S6005 (if you can find a link to their firmwares)
Okay thanks very much X3non. I will check just as you have suggested.
(29-01-2019, 08:19 PM)EMMANUS Why didn't you flash the preloader from your phone's rom. I want to be clear on that, because, without the right preloader, the phone wont come on.
(30-01-2019, 10:07 AM)freshtytOkay, I get "corrupt scatter text file" and "corrupt file info" but I don't understand how he established that the preloader is corrupt.(29-01-2019, 08:19 PM)EMMANUS Why didn't you flash the preloader from your phone's rom. I want to be clear on that, because, without the right preloader, the phone wont come on.
https://www.hovatek.com/forum/thread-264...#pid159201
"... it was when i finally find this firmware with corrupt scatter text, file info and preloader ..."
again he mentioned at
https://www.hovatek.com/forum/thread-264...#pid159239
"capture PNG: is the firmware that i downloaded for my dvice that has corrupt scatter text file, file_info and preloader"
(29-01-2019, 08:19 PM)EMMANUS Why didn't you flash the preloader from your phone's rom. I want to be clear on that, because, without the right preloader, the phone wont come on.