Hovatek Forum MOBILE Android Flash cloned tecno AL86
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


Flash cloned tecno AL86

Flash cloned tecno AL86

Pages (2): Previous 1 2
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
12-02-2019, 04:09 PM
#11



See this https://www.kriztekblog.com/flash-cpb-fi...GLhXDqIbIU for how to extract scatter file and flash coolpad with SP flash tool.
mencoronaldo
mencoronaldo
mencoronaldo
Senior Member
201
14-02-2019, 06:43 AM
#12
(12-02-2019, 04:09 PM)EMMANUS See this https://www.kriztekblog.com/flash-cpb-fi...GLhXDqIbIU for how to extract scatter file and flash coolpad with SP flash tool.

I haven't been able to find the exact ROM (8297-T01), the ones I found were all in flashable zip (https://blogthetech.com/flash-file-coolp...stock-rom/) which I have not been able to flash as the phone keeps rebooting immediately it's about to enter recovery/bootup. I have somehow managed to found the exact ROM on Coolpad's website, (http://www.shoujiweixiu.net/System/2839.html) but everything is in Chinese so I'm unable to download.

The phone is detected by YGDP tool but not recognized by sp flash tool (how can I flash using it). It is connecting as "Coolpad Android Bootloader Interface".




Sent from my TECNO KA7 using Hovatek Mobile
X3non
X3non
X3non
Recognized Contributor
22,062
14-02-2019, 12:18 PM
#13
(14-02-2019, 06:43 AM)mencoronaldo ...
The phone is detected by YGDP tool but not recognized by sp flash tool (how can I flash using it). It is connecting as "Coolpad Android Bootloader Interface".

Sent from my TECNO KA7 using Hovatek Mobile

check out these firmwares @ 
http://rfile6-2014.7to.cn/6/8C/15/Coolpa...cret=Kx2t3
https://support.halabtech.com/index.php?...e&id=42105

this phone might not be an mtk phone rather qualcomm and the reason why you're unable to get SP flash tool to detect the phone (power off the phone, connect the phone to the PC without holding any buttons and check what it gets detects in device manager as)

if the phone gets connected as "Coolpad Android Bootloader Interface",
setup adb and fastboot @ https://www.hovatek.com/forum/thread-588.html 
then try the fastboot command
Code:

fastboot devices

if the device is recognized then try flashing ONLY boot, recovery and system.img using fastboot
Code:

e.g
fastboot flash boot boot.img

then wipe and reboot the phone using the commands below
Code:

fastboot -w
fastboot reboot
This post was last modified: 14-02-2019, 12:27 PM by X3non.
mencoronaldo
mencoronaldo
mencoronaldo
Senior Member
201
14-02-2019, 07:48 PM
#14
(14-02-2019, 12:18 PM)X3non
(14-02-2019, 06:43 AM)mencoronaldo
...
The phone is detected by YGDP tool but not recognized by sp flash tool (how can I flash using it). It is connecting as "Coolpad Android Bootloader Interface".

Sent from my TECNO KA7 using Hovatek Mobile


check out these firmwares @ 
http://rfile6-2014.7to.cn/6/8C/15/Coolpa...cret=Kx2t3
https://support.halabtech.com/index.php?...p;id=42105

this phone might not be an mtk phone rather qualcomm and the reason why you're unable to get SP flash tool to detect the phone (power off the phone, connect the phone to the PC without holding any buttons and check what it gets detects in device manager as)

if the phone gets connected as "Coolpad Android Bootloader Interface",
setup adb and fastboot @ https://www.hovatek.com/forum/thread-588.html 
then try the fastboot command
Code:


fastboot devices


if the device is recognized then try flashing ONLY boot, recovery and system.img using fastboot
Code:


e.g
fastboot flash boot boot.img


then wipe and reboot the phone using the commands below
Code:


fastboot -w
fastboot reboot

The phone does not get detected when connected without holding any button.

I've already downloaded both files and they're both flashable zip without recovery.img and system.img but I can see the boot inside the zip

Sent from my TECNO KA7 using Hovatek Mobile
X3non
X3non
X3non
Recognized Contributor
22,062
15-02-2019, 09:25 AM
#15



(14-02-2019, 07:48 PM)mencoronaldo The phone does not get detected when connected without holding any button.
I've already downloaded both files and they're both flashable zip without recovery.img and system.img but I can see the boot inside the zip

Sent from my TECNO KA7 using Hovatek Mobile

attach a screenshot of the contents of the firmwares you have (upload the images to imgur.com)
mencoronaldo
mencoronaldo
mencoronaldo
Senior Member
201
15-02-2019, 04:58 PM
#16
(15-02-2019, 09:25 AM)X3non
(14-02-2019, 07:48 PM)mencoronaldo
The phone does not get detected when connected without holding any button.
I've already downloaded both files and they're both flashable zip without recovery.img and system.img but I can see the boot inside the zip

Sent from my TECNO KA7 using Hovatek Mobile


attach a screenshot of the contents of the firmwares you have (upload the images to imgur.com)

http://imgur.com/n9JcuYw
http://imgur.com/YxgoFWk

Sent from my TECNO KA7 using Hovatek Mobile
X3non
X3non
X3non
Recognized Contributor
22,062
16-02-2019, 09:42 AM
#17
(15-02-2019, 04:58 PM)mencoronaldo http://imgur.com/n9JcuYw
http://imgur.com/YxgoFWk

Sent from my TECNO KA7 using Hovatek Mobile

first one seems to be custom or modified rom, second one seems to be stock
use the second one and assayed @ https://www.hovatek.com/forum/thread-20497.html

copy boot.img and system folder into WORK folder in assayed
at the end of it all, you'll get system.img which you can now try flashing in fastboot along with boot.img
Pages (2): Previous 1 2
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram