Forever locked - EMERGENCY call only
Forever locked - EMERGENCY call only
(13-02-2019, 02:40 AM)shankar1790 Edit:- i have successfully write its imei back by selecting spd9832a cpu with 8830/10/6815/6531mode instead of BOOT MODE
But problem remains same.
I flashed its firmware again but nothing changes,still same condition.
May be hardware fault because its screen has cracked edges.( like antenna will damaged)
Edit:- I opened up the phone but no sign of damage to device
(13-02-2019, 10:13 AM)freshtytI have used miraclebox 2.82 listed in forum.(13-02-2019, 02:40 AM)shankar1790 Edit:- i have successfully write its imei back by selecting spd9832a cpu with 8830/10/6815/6531mode instead of BOOT MODE
But problem remains same.
I flashed its firmware again but nothing changes,still same condition.
May be hardware fault because its screen has cracked edges.( like antenna will damaged)
Edit:- I opened up the phone but no sign of damage to device
cant say that for sure yet, try backup firmware from the other phone then write the backup onto your phone using miracle box then check for network
(13-02-2019, 11:34 AM)shankar1790 I have used miraclebox 2.82 listed in forum.
But can't able to do backup..
Miraclebox just throwing error
Initialize boot 40...
BootLoad error 1.
I haven't read miraclebox user guide but seems like my phone cpu not fully supported by it.
(Cracked version )
(13-02-2019, 06:41 PM)freshtytTried all of the listed option but same error.(13-02-2019, 11:34 AM)shankar1790 I have used miraclebox 2.82 listed in forum.
But can't able to do backup..
Miraclebox just throwing error
Initialize boot 40...
BootLoad error 1.
I haven't read miraclebox user guide but seems like my phone cpu not fully supported by it.
(Cracked version )
not sure which chipset you must have selected but try all three of these
SPD9832 EMMC
SPD9832 EMMC(New)
SPD9830/2 EMMC
(14-02-2019, 08:09 AM)shankar1790 Tried all of the listed option but same error.
Is miraclebox damage my nv?????.
I will recheck its hardware components.
P1: blank
P2: USB D-
P3: USB D+
P4: GND
(14-02-2019, 02:58 PM)X3non(14-02-2019, 08:09 AM)shankar1790 Tried all of the listed option but same error.
Is miraclebox damage my nv?????.
I will recheck its hardware components.
try again, SPD9832 EMMC or SPD9832 EMMC(New) then change baudrate to lower ones then change phone pinouts to the values below then apply
Code:P1: blank
P2: USB D-
P3: USB D+
P4: GND
(15-02-2019, 03:50 AM)shankar1790 Not working still same error.
I don't have a box/dongle right now.
wfixnv*
wruntimenv*
wcnfixnv*
wcnruntimenv*
wdsp
wmodem
wcnmodem
(15-02-2019, 03:50 AM)shankar1790 Not working still same error.
I don't have a box/dongle right now.
wfixnv*
wruntimenv*
wcnfixnv*
wcnruntimenv*
wdsp
wmodem
wcnmodem
(15-02-2019, 04:07 PM)shankar1790 pictures
(15-02-2019, 04:16 PM)shankar1790 i will try recovery method and post result soon.