Hovatek Forum MOBILE Android [Please help] Trying to Dump, but I have failed to get through. AM STUCK!
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] Trying to Dump, but I have failed to get through. AM STUCK!

[Please help] Trying to Dump, but I have failed to get through. AM STUCK!

BOOSTER
BOOSTER
BOOSTER
Junior Member
21
09-03-2019, 07:22 AM
#1



I have a Tecno Camon X Pro single sim(CA8S) which I want to install TWRP Recovery on it. I understand, I need to have a firmware ready where I can extract files like Stock recovery to be able to flash without errors. PROBLEM: I have looked all over the internet for a CA8S firmware, but can find any. So I was advised by X3non that I should use Wwr + SP Flash Tool to dump the firmware and later extract the required files. But now am stuck on creating the ROM_1, I don't know what I did wrong I have done. If someone knows where I can download the firmware for my variant Tecno Camon X Pro Single sim(CA8S), please share the link. I have attached the device info and the errors I encountered. Please help.
This post was last modified: 09-03-2019, 07:25 AM by BOOSTER.
Attached Files
.png
Screenshot_20190307-022242.png
Size: 239.23 KB / Downloads: 4
.png
Screenshot_20190307-022251.png
Size: 227.21 KB / Downloads: 4
.jpg
1.jpg
Size: 203.41 KB / Downloads: 4
.jpg
2.jpg
Size: 133.82 KB / Downloads: 4
X3non
X3non
X3non
Recognized Contributor
22,062
09-03-2019, 11:57 AM
#2
(09-03-2019, 07:22 AM)BOOSTER I have a Tecno Camon X Pro single sim(CA8S) which I want to install TWRP Recovery on it. I understand, I need to have a firmware ready where I can extract files like Stock recovery to be able to flash without errors. PROBLEM: I have looked all over the internet for a CA8S firmware, but can find any. So I was advised by X3non that I should use Wwr + SP Flash Tool to dump the firmware and later extract the required files. But now am stuck on creating the ROM_1, I don't know what I did wrong I have done. If someone knows where I can download the firmware for my variant Tecno Camon X Pro Single sim(CA8S), please share the link. I have attached the device info and the errors I encountered. Please help.

are you using the custom DA for your model?
download use DA for ca8 @ https://www.hovatek.com/forum/thread-23243.html
BOOSTER
BOOSTER
BOOSTER
Junior Member
21
09-03-2019, 07:37 PM
#3
(09-03-2019, 11:57 AM)X3non
(09-03-2019, 07:22 AM)BOOSTER I have a Tecno Camon X Pro single sim(CA8S) which I want to install TWRP Recovery on it. I understand, I need to have a firmware ready where I can extract files like Stock recovery to be able to flash without errors. PROBLEM: I have looked all over the internet for a CA8S firmware, but can find any. So I was advised by X3non that I should use Wwr + SP Flash Tool to dump the firmware and later extract the required files. But now am stuck on creating the ROM_1, I don't know what I did wrong I have done. If someone knows where I can download the firmware for my variant Tecno Camon X Pro Single sim(CA8S), please share the link. I have attached the device info and the errors I encountered. Please help.

are you using the custom DA for your model?
download use DA for ca8 @ https://www.hovatek.com/forum/thread-23243.html

Thanks X3non for the reply. But am not using the custom DA file, rather am using the CA8 DA file I downloaded from this link <<Tecno CA8 Camon X Pro

https://mega.nz/#!o6pj1QJZ!_cFAmXoOeaWuO...F0mI4bOfro >>

Actually what I did, I deleted the custom file and replaced with the CA8 file I downloaded. But I don't know what is wrong...
X3non
X3non
X3non
Recognized Contributor
22,062
11-03-2019, 09:32 AM
#4
(09-03-2019, 07:37 PM)BOOSTER ...
Actually what I did, I deleted the custom file and replaced with the CA8 file I downloaded. But I don't know what is wrong...

ok, try this
uninstall all mtk & vcom drivers on your pc using the guide @ https://www.hovatek.com/forum/thread-7660.html
install vcom preloader driver @ https://www.hovatek.com/forum/thread-440.html
then retry the backup, this time try without holding any buttons on the phone then also try while holding vol down button
BOOSTER
BOOSTER
BOOSTER
Junior Member
21
31-03-2019, 04:16 AM
#5



(09-03-2019, 07:37 PM)BOOSTER
(09-03-2019, 11:57 AM)X3non
(09-03-2019, 07:22 AM)BOOSTER I have a Tecno Camon X Pro single sim(CA8S) which I want to install TWRP Recovery on it. I understand, I need to have a firmware ready where I can extract files like Stock recovery to be able to flash without errors. PROBLEM: I have looked all over the internet for a CA8S firmware, but can find any. So I was advised by X3non that I should use Wwr + SP Flash Tool to dump the firmware and later extract the required files. But now am stuck on creating the ROM_1, I don't know what I did wrong I have done. If someone knows where I can download the firmware for my variant Tecno Camon X Pro Single sim(CA8S), please share the link. I have attached the device info and the errors I encountered. Please help.

are you using the custom DA for your model?
download use DA for ca8 @ https://www.hovatek.com/forum/thread-23243.html

Thanks X3non for the reply. But am not using the custom DA file, rather am using the CA8 DA file I downloaded from this link <<Tecno CA8 Camon X Pro

https://mega.nz/#!o6pj1QJZ!_cFAmXoOeaWuO...F0mI4bOfro >>

Actually what I did, I deleted the custom file and replaced with the CA8 file I downloaded. But I don't know what is wrong...

Thanks, 

I have finally been able to install the VCOM drivers and dump the firmware for my Tecno Camon X Pro(CA8S) using Infinity box and I have a scatter file ready.
Now my next step is to root and flash a custom recovery and Treble Rom. But am not sure how go about the next steps, how to flash a Treble Rom on this device and which one to use, arm64 A | arm64 A/B? I need to unlock the bootloader, root and then TWRP last flash the custom rom...
Thanks for the advice in advance.
Attached Files
.jpg
TECNO CA8S FIRMWARE BACKUP.jpg
Size: 152.75 KB / Downloads: 3
.txt
_Android_info.txt
Size: 501 bytes / Downloads: 3
.jpg
VCOM.jpg
Size: 81.62 KB / Downloads: 2
.jpg
ARM 64AB 64A.jpg
Size: 38.2 KB / Downloads: 3
X3non
X3non
X3non
Recognized Contributor
22,062
31-03-2019, 06:52 PM
#6
(31-03-2019, 04:16 AM)BOOSTER Thanks, 

I have finally been able to install the VCOM drivers and dump the firmware for my Tecno Camon X Pro(CA8S) using Infinity box and I have a scatter file ready.
Now my next step is to root and flash a custom recovery and Treble Rom. But am not sure how go about the next steps, how to flash a Treble Rom on this device and which one to use, arm64 A | arm64 A/B? I need to unlock the bootloader, root and then TWRP last flash the custom rom...
Thanks for the advice in advance.

root using magisk @ https://www.hovatek.com/forum/thread-21427.html
port twrp @ https://www.hovatek.com/forum/thread-21839.html
your device doesn't doesnt seem to have the A/B (dual slot) feature. you can identify from your backup, scatter file, adb or even fastboot
BTW you still used the CA8 DA file to read firmware using infinity box?
This post was last modified: 31-03-2019, 06:55 PM by X3non.
BOOSTER
BOOSTER
BOOSTER
Junior Member
21
31-03-2019, 07:24 PM
#7
X3non
(31-03-2019, 06:52 PM)X3non
(31-03-2019, 04:16 AM)BOOSTER Thanks, 

I have finally been able to install the VCOM drivers and dump the firmware for my Tecno Camon X Pro(CA8S) using Infinity box and I have a scatter file ready.
Now my next step is to root and flash a custom recovery and Treble Rom. But am not sure how go about the next steps, how to flash a Treble Rom on this device and which one to use, arm64 A | arm64 A/B? I need to unlock the bootloader, root and then TWRP last flash the custom rom...
Thanks for the advice in advance.

root using magisk @ https://www.hovatek.com/forum/thread-21427.html
port twrp @ https://www.hovatek.com/forum/thread-21839.html
your device doesn't doesnt seem to have the A/B (dual slot) feature. you can identify from your backup, scatter file, adb or even fastboot
BTW you still used the CA8 DA file to read firmware using infinity box?
@[b]X3non, [/b]yes! I loaded the CA8 DA file on the Infinity box. I have attached pictures in the previous reply.
X3non
X3non
X3non
Recognized Contributor
22,062
01-04-2019, 09:08 AM
#8
(31-03-2019, 07:24 PM)BOOSTER yes! I loaded the CA8 DA file on the Infinity box. I have attached pictures in the previous reply.

thanks for confirming
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram