HELP!!! tecno d5
HELP!!! tecno d5
(01-08-2014, 06:11 PM)hovatek you'll need to comment out those two
(01-08-2014, 07:38 PM)X3non How am ι тσ do that? ..cos ι tried adding __NOdl_ in front of em ..then reselected the scatter file ..thus they didn't appear on the list this time ..that was the only way ι could use firmware upgrade ..buh it didn't work ..gave error about pmt that ι should use DOWNlOad instead
(01-08-2014, 10:45 PM)X3non Spf tool v3 ..give the error
(Warning hint) get BMT block count fail, default BMT block count is used!
Now if ι click ok тσ proceed тσ firmware upgrade
It now gives the error
SP FLASH TOOL ERROR : (8045)
No valid partition management table(PMT) ƒσʀ storage device!
(HINT):
Please make sure there is α correct load in the target.
Firmware upgrade could not вє executed without PMT!
Please "download" only first тσ create PMT on the target
Spf tool v5 on the other hand doesn't give any errors when ι select scatter file
Buh when ι click firmware upgrade ..it gives the error
_NODL_NVRAm: failed тσ get PMT info
(02-08-2014, 08:33 AM)X3non V3.1316
V3.1324
V3.1328
V5.1352.01
(02-08-2014, 09:48 PM)X3non obiomaojogho@gmail.com
Тнαηкѕ