Wwr_MTK backing up error
Wwr_MTK backing up error
(17-03-2019, 02:06 PM)Toxicvape I'm trying to backup my firmware 1st problem (ram test) with the link u putted and in the last step Wwr not asking for preloader and when i select scatter file to choose what backup all the list have no files
(Infinix note 5 mt6763)
(18-03-2019, 11:11 AM)X3nonIn ram test i got error so i made what is in the other link to get the full length then i did a full readback with it and when i put the file i readedback in wwr to make it flash able with sp it not working no pop up message say there is no preloader and tell me to choose one and no files detected when i go to partion section all components is available with it's length but still not working(17-03-2019, 02:06 PM)Toxicvape I'm trying to backup my firmware 1st problem (ram test) with the link u putted and in the last step Wwr not asking for preloader and when i select scatter file to choose what backup all the list have no files
(Infinix note 5 mt6763)
ram test is step 17, ensure to read everything including what's inside the brackets in step 17 before proceeding
Wwr not asking for preloader and when i select scatter file to choose what backup all the list have no files
you need to explain properly what you mean by this; attach screenshots if possible
(18-03-2019, 01:58 PM)Toxicvape In ram test i got error so i made what is in the other link to get the full length then i did a full readback with it and when i put the file i readedback in wwr to make it flash able with sp it not working no pop up message say there is no preloader and tell me to choose one and no files detected when i go to partion section all components is available with it's length but still not working
(18-03-2019, 03:20 PM)X3non(18-03-2019, 01:58 PM)Toxicvape
In ram test i got error so i made what is in the other link to get the full length then i did a full readback with it and when i put the file i readedback in wwr to make it flash able with sp it not working no pop up message say there is no preloader and tell me to choose one and no files detected when i go to partion section all components is available with it's length but still not working
i cant seem to understand you, post a screenshot or video of what you did
did you readback emmc_boot1 which is supposed to have preloader?
if you did and you've analyzed and extracted preloader using preloader tab
then load your full rom dump, goto scatter file tab then select cut the rom > cut the rom into a folder
this should process the files
to get a scatter file, download scatter file for note 5 @ https://www.hovatek.com/forum/thread-23512.html
modify using notepad++
check if the partitions and their start address and length from wwr match those in the scatter file you download (it should match been the same phone)
if it doesn't then change values where necessary and you can use the scatter file as your rom dump scatter file
let me know if there's any part of what i just mentioned you dont understand
(18-03-2019, 06:30 PM)Toxicvape ...
And done all other steps and readback emmc_user which is the full firmware dump and when i browse it on wwr to make it flashable the button is closed (
Sent from my Infinix X604 using Hovatek Mobile
(19-03-2019, 09:24 AM)X3non(18-03-2019, 06:30 PM)Toxicvape
...
And done all  other steps and  readback emmc_user  which is the full  firmware dump and when i browse it on wwr to  make it flashable  the button is closed (
Sent from my Infinix X604 using Hovatek Mobile
"load your full rom dump, goto scatter file tab then select cut the rom > cut the rom into a folder
this should process the files"
in your screenshot, you've selected scatter of the second version which is not the same as cut the rom
(19-03-2019, 11:37 AM)Toxicvape I did like u said
Sent from my Infinix X604 using Hovatek Mobile
(19-03-2019, 04:31 PM)X3non(19-03-2019, 11:37 AM)Toxicvape
I did like u said
Sent from my Infinix X604 using Hovatek Mobile
i believe you did preloader analysis and extracted a a working preloader from emmc_boot1,
if yes, copy the extracted preloader***.bin file into this folder and delete the existing preloader file
to get a scatter file, download scatter file for similar note 5 build @ https://www.hovatek.com/forum/thread-23512.html
i.e if your current build number is X605-H632AD-*** then download scatter for the same build
modify the scatter file using notepad++
check if the partitions and their start address and length from wwr match those in the scatter file you download (it should match been the same phone)
you can then rename the files from your backup to match the filenames within the scatter file. e.g
boot_a to boot_a.img
lk_a to lk_a.bin
the entire files + the scatter file is your backup
On sideways note, not pertaining to this thread
to get the right boot image for patching and rooting, you need to check the active slot on your devicethis should output the current active slot on your device, if the output is A then patch boot_a.img using magisk for rooting
- adb reboot bootloader
- fastboot getvar all OR fastboot getvar current-slot
if its B then use boot_b.img