[Please help] TWRP Recovery Mode Problem
[Please help] TWRP Recovery Mode Problem
(23-03-2019, 03:18 PM)nokolbuzz DEVICE NAME: GIONEE GN5001Srename file as recovery-verified.IMG flash it via SP
Two days ago i found this post: https://www.hovatek.com/forum/thread-24104.html
Then I tried to perform it so that i can use google apps. in that thread "innagee" wrote these following 4 steps:
o enter twrp recovery.
---------------------------------------------------------------------------------------------------------------------
1) backup your phone's firmware using miracle @ https://www.hovatek.com/forum/thread-13347.html
2) copy recovery from the backup folder and rename to recovery.img then port twrp using the tool @ https://www.hovatek.com/forum/thread-21839.html .
3) rename ported recovery.img in the output folder to recovery.bin and flash using the guide @ https://www.hovatek.com/forum/thread-14106.html
4) Boot the phone into recovery mode using Volume up button + Power button. Lets know if you're able to enter twrp recovery.
---------------------------------------------------------------------------------------------------------------------
i have done first 3 steps successfully without any problem. but i am being failed repeatedly while performing step 4! when i try to access recovery mode, its not being redirected to TWRP recovery mode, rather it is being directed into gionee's default recovery mode.
i suspect one thing. when i try to rename ported recovery.img in the output folder to recovery.bin , it is being renamed as "recovery.bin.img"
is this causing the problem? if yes, please help me how to solve it.
if no, please help otherwise.
I used Miracle Thunder 2.82 for step 1 and step 3.
I tried both 1.2 and 1.0 of Mediatek Auto TWRP Recovery Porter for step 2. still its all the same.
please help.
(23-03-2019, 03:30 PM)SachinBorkarIts redirecting u to verified. IMG so(23-03-2019, 03:18 PM)nokolbuzz DEVICE NAME: GIONEE GN5001Srename file as recovery-verified.IMG flash it via SP
Two days ago i found this post: https://www.hovatek.com/forum/thread-24104.html
Then I tried to perform it so that i can use google apps. in that thread "innagee" wrote these following 4 steps:
o enter twrp recovery.
---------------------------------------------------------------------------------------------------------------------
1) backup your phone's firmware using miracle @ https://www.hovatek.com/forum/thread-13347.html
2) copy recovery from the backup folder and rename to recovery.img then port twrp using the tool @ https://www.hovatek.com/forum/thread-21839.html .
3) rename ported recovery.img in the output folder to recovery.bin and flash using the guide @ https://www.hovatek.com/forum/thread-14106.html
4) Boot the phone into recovery mode using Volume up button + Power button. Lets know if you're able to enter twrp recovery.
---------------------------------------------------------------------------------------------------------------------
i have done first 3 steps successfully without any problem. but i am being failed repeatedly while performing step 4! when i try to access recovery mode, its not being redirected to TWRP recovery mode, rather it is being directed into gionee's default recovery mode.
i suspect one thing. when i try to rename ported recovery.img in the output folder to recovery.bin , it is being renamed as "recovery.bin.img"
is this causing the problem? if yes, please help me how to solve it.
if no, please help otherwise.
I used Miracle Thunder 2.82 for step 1 and step 3.
I tried both 1.2 and 1.0 of Mediatek Auto TWRP Recovery Porter for step 2. still its all the same.
please help.
Sent from my Titanium Vista 4G using Tapatalk
(23-03-2019, 03:32 PM)SachinBorkar(23-03-2019, 03:30 PM)SachinBorkarIts redirecting u to verified. IMG so(23-03-2019, 03:18 PM)nokolbuzz DEVICE NAME: GIONEE GN5001Srename file as recovery-verified.IMG flash it via SP
Two days ago i found this post: https://www.hovatek.com/forum/thread-24104.html
Then I tried to perform it so that i can use google apps. in that thread "innagee" wrote these following 4 steps:
o enter twrp recovery.
---------------------------------------------------------------------------------------------------------------------
1) backup your phone's firmware using miracle @ https://www.hovatek.com/forum/thread-13347.html
2) copy recovery from the backup folder and rename to recovery.img then port twrp using the tool @ https://www.hovatek.com/forum/thread-21839.html .
3) rename ported recovery.img in the output folder to recovery.bin and flash using the guide @ https://www.hovatek.com/forum/thread-14106.html
4) Boot the phone into recovery mode using Volume up button + Power button. Lets know if you're able to enter twrp recovery.
---------------------------------------------------------------------------------------------------------------------
i have done first 3 steps successfully without any problem. but i am being failed repeatedly while performing step 4! when i try to access recovery mode, its not being redirected to TWRP recovery mode, rather it is being directed into gionee's default recovery mode.
i suspect one thing. when i try to rename ported recovery.img in the output folder to recovery.bin , it is being renamed as "recovery.bin.img"
is this causing the problem? if yes, please help me how to solve it.
if no, please help otherwise.
I used Miracle Thunder 2.82 for step 1 and step 3.
I tried both 1.2 and 1.0 of Mediatek Auto TWRP Recovery Porter for step 2. still its all the same.
please help.
Sent from my Titanium Vista 4G using Tapatalk
Flashing it may work
Sent from my Titanium Vista 4G using Tapatalk
(23-03-2019, 04:13 PM)nokolbuzzIs you have firmware with scatter ?(23-03-2019, 03:32 PM)SachinBorkar(23-03-2019, 03:30 PM)SachinBorkarIts redirecting u to verified. IMG so(23-03-2019, 03:18 PM)nokolbuzz DEVICE NAME: GIONEE GN5001Srename file as recovery-verified.IMG flash it via SP
Two days ago i found this post: https://www.hovatek.com/forum/thread-24104.html
Then I tried to perform it so that i can use google apps. in that thread "innagee" wrote these following 4 steps:
o enter twrp recovery.
---------------------------------------------------------------------------------------------------------------------
1) backup your phone's firmware using miracle @ https://www.hovatek.com/forum/thread-13347.html
2) copy recovery from the backup folder and rename to recovery.img then port twrp using the tool @ https://www.hovatek.com/forum/thread-21839.html .
3) rename ported recovery.img in the output folder to recovery.bin and flash using the guide @ https://www.hovatek.com/forum/thread-14106.html
4) Boot the phone into recovery mode using Volume up button + Power button. Lets know if you're able to enter twrp recovery.
---------------------------------------------------------------------------------------------------------------------
i have done first 3 steps successfully without any problem. but i am being failed repeatedly while performing step 4! when i try to access recovery mode, its not being redirected to TWRP recovery mode, rather it is being directed into gionee's default recovery mode.
i suspect one thing. when i try to rename ported recovery.img in the output folder to recovery.bin , it is being renamed as "recovery.bin.img"
is this causing the problem? if yes, please help me how to solve it.
if no, please help otherwise.
I used Miracle Thunder 2.82 for step 1 and step 3.
I tried both 1.2 and 1.0 of Mediatek Auto TWRP Recovery Porter for step 2. still its all the same.
please help.
Sent from my Titanium Vista 4G using Tapatalk
Flashing it may work
Sent from my Titanium Vista 4G using Tapatalk
Good Evening Sir, Thanks a lot for your kind reply. I have just downloaded SP. My question is: can i directly use SP to flash the recovery-verified.IMG file as you said to rename and then to flash by SP. I am confused because the recovery file was created by using Miracle box. Thanks in advance.
(23-03-2019, 04:16 PM)SachinBorkar(23-03-2019, 04:13 PM)nokolbuzzIs you have firmware with scatter ?(23-03-2019, 03:32 PM)SachinBorkar(23-03-2019, 03:30 PM)SachinBorkarIts redirecting u to verified. IMG so(23-03-2019, 03:18 PM)nokolbuzz DEVICE NAME: GIONEE GN5001Srename file as recovery-verified.IMG flash it via SP
Two days ago i found this post: https://www.hovatek.com/forum/thread-24104.html
Then I tried to perform it so that i can use google apps. in that thread "innagee" wrote these following 4 steps:
o enter twrp recovery.
---------------------------------------------------------------------------------------------------------------------
1) backup your phone's firmware using miracle @ https://www.hovatek.com/forum/thread-13347.html
2) copy recovery from the backup folder and rename to recovery.img then port twrp using the tool @ https://www.hovatek.com/forum/thread-21839.html .
3) rename ported recovery.img in the output folder to recovery.bin and flash using the guide @ https://www.hovatek.com/forum/thread-14106.html
4) Boot the phone into recovery mode using Volume up button + Power button. Lets know if you're able to enter twrp recovery.
---------------------------------------------------------------------------------------------------------------------
i have done first 3 steps successfully without any problem. but i am being failed repeatedly while performing step 4! when i try to access recovery mode, its not being redirected to TWRP recovery mode, rather it is being directed into gionee's default recovery mode.
i suspect one thing. when i try to rename ported recovery.img in the output folder to recovery.bin , it is being renamed as "recovery.bin.img"
is this causing the problem? if yes, please help me how to solve it.
if no, please help otherwise.
I used Miracle Thunder 2.82 for step 1 and step 3.
I tried both 1.2 and 1.0 of Mediatek Auto TWRP Recovery Porter for step 2. still its all the same.
please help.
Sent from my Titanium Vista 4G using Tapatalk
Flashing it may work
Sent from my Titanium Vista 4G using Tapatalk
Good Evening Sir, Thanks a lot for your kind reply. I have just downloaded SP. My question is: can i directly use SP to flash the recovery-verified.IMG file as you said to rename and then to flash by SP. I am confused because the recovery file was created by using Miracle box. Thanks in advance.
Sent from my Titanium Vista 4G using Tapatalk
(23-03-2019, 04:18 PM)nokolbuzzIs it contains recovery-verified.img(23-03-2019, 04:16 PM)SachinBorkar(23-03-2019, 04:13 PM)nokolbuzzIs you have firmware with scatter ?(23-03-2019, 03:32 PM)SachinBorkar(23-03-2019, 03:30 PM)SachinBorkar rename file as recovery-verified.IMG flash it via SPIts redirecting u to verified. IMG so
Sent from my Titanium Vista 4G using Tapatalk
Flashing it may work
Sent from my Titanium Vista 4G using Tapatalk
Good Evening Sir, Thanks a lot for your kind reply. I have just downloaded SP. My question is: can i directly use SP to flash the recovery-verified.IMG file as you said to rename and then to flash by SP. I am confused because the recovery file was created by using Miracle box. Thanks in advance.
Sent from my Titanium Vista 4G using Tapatalk
yes, sir. i have. i did it by using Miracle Box.
(23-03-2019, 04:20 PM)SachinBorkar(23-03-2019, 04:18 PM)nokolbuzzIs it contains recovery-verified.img(23-03-2019, 04:16 PM)SachinBorkar(23-03-2019, 04:13 PM)nokolbuzzIs you have firmware with scatter ?(23-03-2019, 03:32 PM)SachinBorkar Its redirecting u to verified. IMG so
Flashing it may work
Sent from my Titanium Vista 4G using Tapatalk
Good Evening Sir, Thanks a lot for your kind reply. I have just downloaded SP. My question is: can i directly use SP to flash the recovery-verified.IMG file as you said to rename and then to flash by SP. I am confused because the recovery file was created by using Miracle box. Thanks in advance.
Sent from my Titanium Vista 4G using Tapatalk
yes, sir. i have. i did it by using Miracle Box.
Sent from my Titanium Vista 4G using Tapatalk
(23-03-2019, 04:25 PM)nokolbuzzSorry bro I haven't any idea.(23-03-2019, 04:20 PM)SachinBorkar(23-03-2019, 04:18 PM)nokolbuzzIs it contains recovery-verified.img(23-03-2019, 04:16 PM)SachinBorkar(23-03-2019, 04:13 PM)nokolbuzz Good Evening Sir, Thanks a lot for your kind reply. I have just downloaded SP. My question is: can i directly use SP to flash the recovery-verified.IMG file as you said to rename and then to flash by SP. I am confused because the recovery file was created by using Miracle box. Thanks in advance.Is you have firmware with scatter ?
Sent from my Titanium Vista 4G using Tapatalk
yes, sir. i have. i did it by using Miracle Box.
Sent from my Titanium Vista 4G using Tapatalk
Sir, it contains recovery.bin ... please see the screenshot.
(23-03-2019, 03:18 PM)nokolbuzz ...
please help.