Hovatek Forum MOBILE Android Homtom HT17
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


Homtom HT17

Homtom HT17

Pages (3): Previous 1 2 3 Next
xerxes
xerxes
xerxes
Senior Member
8,355
27-03-2019, 03:15 PM
#11



(27-03-2019, 09:53 AM)masgkida I have not taken note of the phone's original build number. But I have used all the latest versions of the SP Flash tool including the onces you sent me the links.

do you get the same error on all the flash tools you tried?
hovatek
hovatek
hovatek
Administrator
49,570
28-03-2019, 01:35 AM
#12
(27-03-2019, 09:53 AM)masgkida I have not taken note of the phone's original build number. But I have used all the latest versions of the SP Flash tool including the onces you sent me the links.

1. Hope you've installed VCOM drivers. If yes, how did you install it?
2. Hope you're not holding any button while connecting to PC

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
masgkida
masgkida
masgkida
Enthusiastic Member
10
29-03-2019, 12:16 PM
#13
Iam getting thesame kind of error with all the sp ftools. Vcom drivers were well installed
X3non
X3non
X3non
Recognized Contributor
22,062
29-03-2019, 04:44 PM
#14
(29-03-2019, 12:16 PM)masgkida Iam getting thesame kind of error with all the sp ftools. Vcom drivers were well installed

confirm this
power off the phone > launch device manager on your PC > connect the phone to the PC (with and without holding vol down button)
does the PC make any sound when the phone gets connected? and does device manager refresh?
if yes, what does the phone get detected as?
This post was last modified: 29-03-2019, 04:45 PM by X3non.
masgkida
masgkida
masgkida
Enthusiastic Member
10
01-04-2019, 12:52 PM
#15



when I connected the phone to the PC it makes a sound and the device manager refreshes. However, I want to state that the phone is dead i.e it does not start up not to talk of switching off. The device manager recognizes the phone as MTK USB Port Com 18.
X3non
X3non
X3non
Recognized Contributor
22,062
01-04-2019, 03:32 PM
#16
(01-04-2019, 12:52 PM)masgkida when I connected the phone to the PC it makes a sound and the device manager refreshes. However, I want to state that the phone is dead i.e it does not start up not to talk of switching off. The device manager recognizes the phone as MTK USB Port Com 18.

when you connect the phone, update the driver displayed in device manager to vcom preloader using the guide @ https://www.hovatek.com/forum/thread-16839.html
then retry flashing
masgkida
masgkida
masgkida
Enthusiastic Member
10
02-04-2019, 02:12 PM
#17
I have done as instructed(updated the driver) but no changes it is giving me the same error
X3non
X3non
X3non
Recognized Contributor
22,062
02-04-2019, 10:54 PM
#18
(02-04-2019, 02:12 PM)masgkida I have done as instructed(updated the driver) but no changes it is giving me the same error

ensure you're using this particular sp flash tool from this post @ https://www.hovatek.com/forum/thread-270...#pid164231
try flashing with and without holding vol down button
if flashing isn't successful, try formatting only userdata partition with and without holding vol down button ; see https://www.hovatek.com/forum/thread-21638.html
let me know the outcome
masgkida
masgkida
masgkida
Enthusiastic Member
10
03-04-2019, 02:52 PM
#19
I have done as instructed in https://www.hovatek.com/forum/thread-21638.html but I got the same error
X3non
X3non
X3non
Recognized Contributor
22,062
03-04-2019, 03:17 PM
#20



(03-04-2019, 02:52 PM)masgkida I have done as instructed in https://www.hovatek.com/forum/thread-21638.html but I got the same error

you're unable to flash or even format, thats likely a hardware problem
either the phone has faulty USB port or emmc chip. take the phone for hardware checkup & repairs
Pages (3): Previous 1 2 3 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram