Hovatek Forum MOBILE Android Infinix x608 flash,With out dongle
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Infinix x608 flash,With out dongle

Infinix x608 flash,With out dongle

isyrecord
isyrecord
isyrecord
Senior Member
137
14-04-2019, 05:09 PM
#1



Good day please is there any way I can get my Infinix x608 flashed,  without cm2 dongle please  Sleepy
X3non
X3non
X3non
Recognized Contributor
22,062
15-04-2019, 01:21 AM
#2
(14-04-2019, 05:09 PM)isyrecord Good day please is there any way I can get my Infinix x608 flashed,  without cm2 dongle please  Sleepy

you can flash using any qualcomm flasher not necessarily cm2, there's also hqxa tool @ https://www.hovatek.com/forum/thread-26553.html
ALBA3D
ALBA3D
ALBA3D
Junior Member
24
15-04-2019, 06:40 AM
#3
If you want to flash the device to remove pattern,pin or password you can use my method here
isyrecord
isyrecord
isyrecord
Senior Member
137
15-04-2019, 08:13 AM
#4
(15-04-2019, 06:40 AM)ALBA3D If you want to flash the device to remove pattern,pin or password you can use my method here

I don't think it going to work for this device I was even trying wipe it by press volume up and power button 

It shown only three options and no factory reset option there, 

Not only that I want to flash it completely and I discover that it only make connection sound no effect,  and I have installed the driver, and before it even connect to the image loader that I want to use, it  show battery percent. So I don't know what to do now .
X3non
X3non
X3non
Recognized Contributor
22,062
15-04-2019, 10:53 AM
#5



(15-04-2019, 08:13 AM)isyrecord I don't think it going to work for this device I was even trying wipe it by press volume up and power button 

It shown only three options and no factory reset option there, 

Not only that I want to flash it completely and I discover that it only make connection sound no effect,  and I have installed the driver, and before it even connect to the image loader that I want to use, it  show battery percent. So I don't know what to do now .

what is wrong with the phone in question?
what options do you have in recovery mode?
to flash, you must boot the phone into edl mode; refer to https://www.hovatek.com/forum/thread-23298.html
isyrecord
isyrecord
isyrecord
Senior Member
137
15-04-2019, 11:08 AM
#6
(15-04-2019, 10:53 AM)X3non
(15-04-2019, 08:13 AM)isyrecord I don't think it going to work for this device I was even trying wipe it by press volume up and power button 

It shown only three options and no factory reset option there, 

Not only that I want to flash it completely and I discover that it only make connection sound no effect,  and I have installed the driver, and before it even connect to the image loader that I want to use, it  show battery percent. So I don't know what to do now .

what is wrong with the phone in question?
what options do you have in recovery mode?
to flash, you must boot the phone into edl mode; refer to https://www.hovatek.com/forum/thread-23298.html

OK you mean I should bridge the two dot before I start the flash right? 

Please after that what Will I do?
isyrecord
isyrecord
isyrecord
Senior Member
137
15-04-2019, 02:33 PM
#7
It connected but
This is error I came across after bridged the two dot

Download Fail:FireHose Fail:FHLoader FailTonguerocess fail
X3non
X3non
X3non
Recognized Contributor
22,062
15-04-2019, 04:54 PM
#8
(15-04-2019, 02:33 PM)isyrecord It connected but
This is error I came across after bridged the two dot

Download Fail:FireHose Fail:FHLoader FailTonguerocess fail

you skipped some of the questions i asked
ensure you're using the right programmer file for X608; you can download it from the list @ https://www.hovatek.com/forum/thread-24298.html
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram