Hovatek Forum HARDWARE SIM / Network unlock Wingle E8372h-608 solution
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Wingle E8372h-608 solution

Wingle E8372h-608 solution

Pages (3): 1 2 3 Next
nomanpezu
nomanpezu
nomanpezu
Enthusiastic Member
11
04-06-2019, 05:36 AM
#1



Hi Everyone.
Can someone help me,I tried everything but no luck.
my e8372h-608 wingle not accepting any command cannot go to download mode by any mean after i unlock it. Tried to flash a new firmware by bootpin method but tha balong usbloader takes half an hour to complete and after that nothing happens. tried to load usblsafe-8372h.bin and usbsafe.bin both by balong downloader but nothing happened. balong downloader did nothing just show some error message and puff line is complete and nothing happening at all.

Device info is attached.

Please guys if you have any solution then help me, guys. Thanks in advance
.png
Capture2.png
Size: 11.53 KB / Downloads: 28
This post was last modified: 04-06-2019, 05:37 AM by nomanpezu.
freshtyt
freshtyt
freshtyt
Senior Member
2,949
04-06-2019, 10:13 AM
#2
(04-06-2019, 05:36 AM)nomanpezu Hi Everyone.
Can someone help me,I tried everything but no luck.
my e8372h-608 wingle not accepting any command cannot go to download mode by any mean after i unlock it. Tried to flash a new firmware by bootpin method but tha balong usbloader takes half an hour to complete and after that nothing happens. tried to load usblsafe-8372h.bin and usbsafe.bin both by balong downloader but nothing happened. balong downloader did nothing just show some error message and puff line is complete and nothing happening at all.

Device info is attached.

Please guys if you have any solution then help me, guys. Thanks in advance

i dont think flashing usbloader or usblsafe will work, try flashing unlocked firmware instead
you can check the list @ https://www.hovatek.com/forum/thread-26818.html
nomanpezu
nomanpezu
nomanpezu
Enthusiastic Member
11
04-06-2019, 06:53 PM
#3
(04-06-2019, 10:13 AM)freshtyt
(04-06-2019, 05:36 AM)nomanpezu Hi Everyone.
Can someone help me,I tried everything but no luck.
my e8372h-608 wingle not accepting any command cannot go to download mode by any mean after i unlock it. Tried to flash a new firmware by bootpin method but tha balong usbloader takes half an hour to complete and after that nothing happens. tried to load usblsafe-8372h.bin and usbsafe.bin both by balong downloader but nothing happened. balong downloader did nothing just show some error message and puff line is complete and nothing happening at all.

Device info is attached.

Please guys if you have any solution then help me, guys. Thanks in advance

i dont think flashing usbloader or usblsafe will work, try flashing unlocked firmware instead
you can check the list @ https://www.hovatek.com/forum/thread-26818.html

Tried that too but device is not going into download mode, at^godload command is not supported in dc unlocker. and for flashing download mode is necessary.
freshtyt
freshtyt
freshtyt
Senior Member
2,949
05-06-2019, 12:40 PM
#4
(04-06-2019, 06:53 PM)nomanpezu Tried that too but device is not going into download mode, at^godload command is not supported in dc unlocker. and for flashing download mode is necessary.

what version of dc unlocker are you using, latest?
connect your device to pc then try launching this com port switcher @ https://routerunlock.com/?wpfb_dl=1282 then retry either flashing firmware or AT command in dc unlocker
nomanpezu
nomanpezu
nomanpezu
Enthusiastic Member
11
06-06-2019, 03:29 AM
#5



downloaded latest version of DC unlocker, followed your process connected my device launched com port switcher there was a sound of tanannn(before com port switcher won't make any sound). tried to flash my firmware but again same problem error number 16: failed to switch to download mode. Then at dc unlocker tried to use AT command but no luck same problem "Command Not Supported".
freshtyt
freshtyt
freshtyt
Senior Member
2,949
06-06-2019, 11:39 AM
#6
(06-06-2019, 03:29 AM)nomanpezu downloaded latest version of DC unlocker, followed your process connected my device launched com port switcher there was a sound of tanannn(before com port switcher won't make any sound). tried to flash my firmware but again same problem error number 16: failed to switch to download mode. Then at dc unlocker tried to use AT command but no luck same problem "Command Not Supported".

post screenshot of error message on DC unlocker tool also showing device detected and the command you sent
search if you can find and try the exact same dc unlocker version in this video @ https://www.youtube.com/watch?v=kIvwjyoGMRM
nomanpezu
nomanpezu
nomanpezu
Enthusiastic Member
11
06-06-2019, 08:19 PM
#7
(06-06-2019, 11:39 AM)freshtyt
(06-06-2019, 03:29 AM)nomanpezu downloaded latest version of DC unlocker, followed your process connected my device launched com port switcher there was a sound of tanannn(before com port switcher won't make any sound). tried to flash my firmware but again same problem error number 16: failed to switch to download mode. Then at dc unlocker tried to use AT command but no luck same problem "Command Not Supported".

post screenshot of error message on DC unlocker tool also showing device detected and the command you sent
search if you can find and try the exact same dc unlocker version in this video @ https://www.youtube.com/watch?v=kIvwjyoGMRM
Here check screenshot, before unlocking at^godload command was working but after unlocking nothing is working. only at^reset command is working. by the way i unlocked it with "Telenor E8372H 21.328.62.00.1460 Unlocked_FW.rar" file.
Attached Files
.png
Capture3.PNG
Size: 115 KB / Downloads: 9
freshtyt
freshtyt
freshtyt
Senior Member
2,949
07-06-2019, 10:15 AM
#8
(06-06-2019, 08:19 PM)nomanpezu Here check screenshot, before unlocking at^godload command was working but after unlocking nothing is working. only at^reset command is working. by the way i unlocked it with "Telenor E8372H 21.328.62.00.1460 Unlocked_FW.rar" file.

how did you manage to get godload command to work in order to flash the unlocked firmware? you should be able to repeat exactly the same steps you carried out before the unlock
and your modem is showing 21.327 when you unlocked using 21.328 , is that an error? maybe you used the 21.327
nomanpezu
nomanpezu
nomanpezu
Enthusiastic Member
11
07-06-2019, 06:08 PM
#9
(07-06-2019, 10:15 AM)freshtyt
(06-06-2019, 08:19 PM)nomanpezu Here check screenshot, before unlocking at^godload command was working but after unlocking nothing is working. only at^reset command is working. by the way i unlocked it with "Telenor E8372H 21.328.62.00.1460 Unlocked_FW.rar" file.

how did you manage to get godload command to work in order to flash the unlocked firmware? you should be able to repeat exactly the same steps you carried out before the unlock
and your modem is showing 21.327 when you unlocked using 21.328 , is that an error? maybe you used the 21.327

I am following the same method i used before for unlocking but now it is not working. And i used the 21.328 because it was mentioned there that it is for both 21.327 and 21.328 versions firmware. i think it is because of that firmware, because it is of higher ver that's why at^godload command is not supported. I just need a solution to switch my device into download mode so that i can flash a lower version firmware.
freshtyt
freshtyt
freshtyt
Senior Member
2,949
08-06-2019, 09:06 AM
#10



(07-06-2019, 06:08 PM)nomanpezu I am following the same method i used before for unlocking but now it is not working. And i used the 21.328 because it was mentioned there that it is for both 21.327 and 21.328 versions firmware. i think it is because of that firmware, because it is of higher ver that's why at^godload command is not supported. I just need a solution to switch my device into download mode so that i can flash a lower version firmware.

can't say for sure, afterall you previously thought at^godload doesn't work on the original firmware until you finally managed to get it to work so maybe there's something you're not doing right
try another dc unlocker version like latest version OR try putty, you need to search online how to configure and connect to putty
Pages (3): 1 2 3 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram