Hovatek Forum MOBILE Android UPDATE ON MY INFINIX X605 Bitter Ordeal
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


UPDATE ON MY INFINIX X605 Bitter Ordeal

UPDATE ON MY INFINIX X605 Bitter Ordeal

Pages (2): 1 2 Next
dapo4friends
dapo4friends
dapo4friends
Senior Member
170
14-06-2019, 07:11 PM
#1



i dont know why infinix note 5 stylus is so difficult to with

1. The Start CMD fail ERROR persists despite having taken it to an engineer (and of course another system) to help with flashing.

2. the phone isnt booting but the laptop recognises when its plugged in.

3. i advised that he opened the phone and remove the battery to prevent the booting that the phone tries to do during flashing. The person who was to open the phone says its metallic and very difficult to open (that would be crap anyways) but for an engineer to say so, i just had to take it seriously and came back home (but someone should be ablt to open this thing na!!)

im planning to go to another engineer in computer village tomorrow (i want to avoid going to infinix office because warranty has been voided already..the enginner constructed one big lie for me to use though), but the thought of waiting for 7 days without a phone is Yehh!!!

im even considering probably sending it to Hovatek sef via courier (afterall youve given so much), but:

1. na 4k i get, i dont know if that can cover to and fro shipping and flashing the phone
2. i don't know if i can get it back tomorrow

Hovatek, what are your thoughts on this...
apara
apara
apara
Senior Member
205
14-06-2019, 11:04 PM
#2
Are you sure the DA file is the right one for your device?
Nedmichael
Nedmichael
Nedmichael
Junior Member
28
15-06-2019, 03:54 AM
#3
Yourself can open the phone. Do your have the tools(screw drivers of various sizes). I opened mine, like three times now. It's not difficult, just that you must be careful and follow due steps.


..
for screenshots and videos assistance...08103647654

1 .Remove your simcard slot/tray and XPEN

2 .unfasten the two tiny screw, that are seen below on the USB port..under the device.

3(important) now with a tiny flat head screw driver(two), stick one right through the USB location ( like you're force opening). Between the black rubber and the metal (red,gold or black).
'Not btw the glass screen and the black rubber-like' .Then at the XPen location, also stick one, kind of drag them up and open the cover

DON'T TRY OPENING THROUGH THE "EAR PHONE JACK". DON'T STICK OR PUT ANY FLAT HEAD SCREW OR KNIFE THERE. Don't put the flathead screw to deep to avoid damaging the panel. Take it easy, I have done it severally.
This post was last modified: 15-06-2019, 03:59 AM by Nedmichael. Edit Reason: Misspellings
Nedmichael
Nedmichael
Nedmichael
Junior Member
28
15-06-2019, 04:53 AM
#4
You can flash your device using the INFINIX XfLASH tech by infinixmobility limited.  Visit infinixmobility website, search and download the Stock ROM for your device and the attached XFLASH file, drivers and user guide. 

I have the XFLASH FILE and USEr guide, if you need them.
This post was last modified: 15-06-2019, 05:48 AM by Nedmichael. Edit Reason: Updated
X3non
X3non
X3non
Recognized Contributor
22,062
15-06-2019, 10:53 AM
#5



(14-06-2019, 07:11 PM)dapo4friends i dont know why infinix note 5 stylus is so difficult to with
...

you're to flash using the custom DA for your model or you'll keep keep the same errors; download DA @ https://www.hovatek.com/forum/thread-23339.html
Nedmichael
Nedmichael
Nedmichael
Junior Member
28
15-06-2019, 11:04 AM
#6
(15-06-2019, 10:53 AM)X3non
(14-06-2019, 07:11 PM)dapo4friends i dont know why infinix note 5 stylus is so difficult to with
...

you're to flash using the custom DA for your model or you'll keep keep the same errors; download DA @ https://www.hovatek.com/forum/thread-23339.html
@X3non, permit me to say that even the custom DA doesn't work. It may work for other build number, but it doesn't work for (X605 H653AD). I'm a witness. 
 He either has to open the device(which is complicated, but I dropped a solution) OR flash with the XFLASH from INFINIXMOBILITY. 

NOTE 5 STYLUS has more than 3 different BUILD NUMBERS.
This post was last modified: 15-06-2019, 11:06 AM by Nedmichael.
dapo4friends
dapo4friends
dapo4friends
Senior Member
170
15-06-2019, 11:32 PM
#7
(14-06-2019, 11:04 PM)apara Are you sure the DA file is the right one for your device?

Yes i also downloaded and used the custom DA on the .1824 version  of sp flashtool, thats the only one that accepted the custom DA.. .1916 and versions before .1824 didnt accept it
This post was last modified: 15-06-2019, 11:41 PM by dapo4friends.
dapo4friends
dapo4friends
dapo4friends
Senior Member
170
15-06-2019, 11:37 PM
#8
(15-06-2019, 04:53 AM)Nedmichael You can flash your device using the INFINIX XfLASH tech by infinixmobility limited.  Visit infinixmobility website, search and download the Stock ROM for your device and the attached XFLASH file, drivers and user guide. 

I have the XFLASH FILE and USEr guide, if you need them.

Thanks bro for your help..wish i saw these yesterday..ive sent the phone to carlcare to receive it on tuesday...let me know if you successfully used the boot.img and ramdisk-recovery.img i provided.....

i appreciate
dapo4friends
dapo4friends
dapo4friends
Senior Member
170
15-06-2019, 11:40 PM
#9
(15-06-2019, 11:04 AM)Nedmichael
(15-06-2019, 10:53 AM)X3non
(14-06-2019, 07:11 PM)dapo4friends i dont know why infinix note 5 stylus is so difficult to with
...

you're to flash using the custom DA for your model or you'll keep keep the same errors; download DA @ https://www.hovatek.com/forum/thread-23339.html
@X3non, permit me to say that even the custom DA doesn't work. It may work for other build number, but it doesn't work for (X605 H653AD). I'm a witness. 
 He either has to open the device(which is complicated, but I dropped a solution) OR flash with the XFLASH from INFINIXMOBILITY. 

NOTE 5 STYLUS has more than 3 different BUILD NUMBERS.

Yeah he custom DA didnt work... i even tried the infinix flashtool too..same start.cmd.fail error.

have you successfully flashed a rom to the note 5 stylus before.. was it by removing the battery to do it?
X3non
X3non
X3non
Recognized Contributor
22,062
20-06-2019, 09:11 AM
#10



(15-06-2019, 11:32 PM)dapo4friends Yes i also downloaded and used the custom DA on the .1824 version  of sp flashtool, thats the only one that accepted the custom DA.. .1916 and versions before .1824 didnt accept it

i'll guess it's the "lib da not match" error?
the fix for the error message you get while using latest version is listed @ https://www.hovatek.com/forum/thread-439.html
This post was last modified: 20-06-2019, 09:12 AM by X3non.
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram