Hovatek Forum MOBILE Android Tecno m3 boot loop after flashing
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Tecno m3 boot loop after flashing

Tecno m3 boot loop after flashing

Pages (2): 1 2 Next
Juliusiceberg
Juliusiceberg
Juliusiceberg
Enthusiastic Member
7
21-06-2019, 11:22 PM
#1



Please I need help 
Pls need help with tecno m3 boot loop after flashing with a with a old stock room 4.22 and it original firmware is 4.22 Pls I need help
Tecno m3 wound not boot pass  tecno logo
Have tried flashing it with different stock rom from different site and even your stock rom have try 4.4 with no avail
hovatek
hovatek
hovatek
Administrator
49,570
22-06-2019, 09:54 AM
#2
(21-06-2019, 11:22 PM)Juliusiceberg Please I need help 
Pls need help with tecno m3 boot loop after flashing with a with a old stock room 4.22 and it original firmware is 4.22 Pls I need help
Tecno m3 wound not boot pass  tecno logo
Have tried flashing it with different stock rom from different site and even your stock rom have try 4.4 with no avail

1. Have you tried booting into factory mode (vol down + power) and wiping emmc?
2. Is your M3 the old or new OS type?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Juliusiceberg
Juliusiceberg
Juliusiceberg
Enthusiastic Member
7
22-06-2019, 05:14 PM
#3
I have tried factory reset both in the English way and the Chinese way too but it still won't boot pass tecno logo officially it was old 4.22
xerxes
xerxes
xerxes
Senior Member
8,355
23-06-2019, 09:50 PM
#4
(22-06-2019, 05:14 PM)Juliusiceberg I have tried factory reset both in the English way and the Chinese way too but it still won't boot pass tecno logo officially it was old 4.22
the emmc chip maybe damaged, it’ll need replacement or repair.
hovatek
hovatek
hovatek
Administrator
49,570
24-06-2019, 07:52 AM
#5



(22-06-2019, 05:14 PM)Juliusiceberg I have tried factory reset both in the English way and the Chinese way too but it still won't boot pass tecno logo officially it was old 4.22

I presume you had used the phone before it got bricked, correct me if I'm wrong about that.
Check the pictures for old and new OS Tecno M3 @ https://www.hovatek.com/forum/thread-311.html and
Confirm yours was Old OS, not New. Also, are you certain its not M3 4.4 ?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Juliusiceberg
Juliusiceberg
Juliusiceberg
Enthusiastic Member
7
26-06-2019, 08:51 PM
#6
Yes It used before it got bricked and it old firmware 4.2
X3non
X3non
X3non
Recognized Contributor
22,062
27-06-2019, 10:47 AM
#7
(26-06-2019, 08:51 PM)Juliusiceberg Yes It used before it got bricked and it old firmware 4.2

use the format tab in sp flash tool to format all except bootloader then confirm it the phone still powers on and gets stuck on tecno logo
Juliusiceberg
Juliusiceberg
Juliusiceberg
Enthusiastic Member
7
27-06-2019, 11:40 PM
#8
Yes have tried the format all except bootloader it still stay the same and it shows an error when trying to flash the phone while I untick the pre-loaded the error message is PMT changed I should try format all plus download
xerxes
xerxes
xerxes
Senior Member
8,355
28-06-2019, 12:25 AM
#9
(27-06-2019, 11:40 PM)Juliusiceberg Yes have tried the format all except bootloader it still stay the same and it shows an error when trying to flash the phone while I untick the pre-loaded the error message is PMT changed I should try format all plus download

Does the phone power on and stuck on bootlogo after formatting?
Juliusiceberg
Juliusiceberg
Juliusiceberg
Enthusiastic Member
7
28-06-2019, 12:57 AM
#10



It powers on fine and still stuck on logo after formatting
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram