Hovatek Forum MOBILE Android STATUS_SEC_IMG_TYPE_MISMATCH
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


STATUS_SEC_IMG_TYPE_MISMATCH

STATUS_SEC_IMG_TYPE_MISMATCH

Pages (2): 1 2 Next
hangar18
hangar18
hangar18
Enthusiastic Member
10
07-09-2019, 12:31 PM
#1



hi,
i have this phone Flash Plus 2 (Alcatel or TCL, i don't know), i formatted the whole Flash (including the bootloader), and the phone completely dead, when i tried to power up by pressing the power button, nothing happened, the phone just dead.
i then tried to flash it using flashtool, and the warning message "STATUS_SEC_IMG_TYPE_MISMATCH" showed up.
i did flash the phone before i format the whole flash, and it went fine, no error message.and i have a brand new system.
what is wrong with my phone?
help please
X3non
X3non
X3non
Recognized Contributor
22,062
07-09-2019, 03:08 PM
#2
(07-09-2019, 12:31 PM)hangar18 hi,
i have this phone Flash Plus 2 (Alcatel or TCL, i don't know), i formatted the whole Flash (including the bootloader), and the phone completely dead, when i tried to power up by pressing the power button, nothing happened, the phone just dead.
i then tried to flash it using flashtool, and the warning message "STATUS_SEC_IMG_TYPE_MISMATCH" showed up.
i did flash the phone before i format the whole flash, and it went fine, no error message.and i have a brand new system.
what is wrong with my phone?
help please

try flashing only preloader first; lets know the outcome
also try flashing the entire firmware using "firmware upgrade" option in SPft
also ensure to attach full screenshot of any error along with SPft window when you attempt to flash; upload your images to imgur.com then drop the link here
if both above fails, try using this alcatel mobile upgrade tool @ https://link-4share.com/download/MZT9Yij...p_exe.html
This post was last modified: 07-09-2019, 03:09 PM by X3non.
hangar18
hangar18
hangar18
Enthusiastic Member
10
08-09-2019, 04:22 AM
#3
(07-09-2019, 03:08 PM)X3non
(07-09-2019, 12:31 PM)hangar18 hi,
i have this phone Flash Plus 2 (Alcatel or TCL, i don't know), i formatted the whole Flash (including the bootloader), and the phone completely dead, when i tried to power up by pressing the power button, nothing happened, the phone just dead.
i then tried to flash it using flashtool, and the warning message "STATUS_SEC_IMG_TYPE_MISMATCH" showed up.
i did flash the phone before i format the whole flash, and it went fine, no error message.and i have a brand new system.
what is wrong with my phone?
help please

try flashing only preloader first; lets know the outcome
also try flashing the entire firmware using "firmware upgrade" option in SPft
also ensure to attach full screenshot of any error along with SPft window when you attempt to flash; upload your images to imgur.com then drop the link here
if both above fails, try using this alcatel mobile upgrade tool @ https://link-4share.com/download/MZT9Yij...p_exe.html
hello there

1. this when i tick the preloader only

https://imgur.com/cyktmZN

when i pressed download, it said i should pick at least 1 rom, so i picked the file called preloader_shine_plus.bin. it's too bad i couldn't attached the file.

2. This with the Firmware Upgrade Option.

https://imgur.com/k4FduIH

This from different Version of the ROM, succeeded when downloading Preloader only, so continue to Firmware Upgrade (didn't pick file called preloader_shine_plus.bin, because it would change the option to Download Only automatically)

https://imgur.com/BJ3FCiD

(i use original ROM)

3. Alcatel Mobile Upgrade
the model should be FL02, but it doesn't recognize the Device, it says "You Chose The Wrong Model" (something like that)
This post was last modified: 08-09-2019, 04:47 AM by hangar18.
X3non
X3non
X3non
Recognized Contributor
22,062
09-09-2019, 04:31 PM
#4
(08-09-2019, 04:22 AM)hangar18 hello there
...

are you holding any buttons when you connect the phone to attempt flashing?
try flashing both with and without the battery inserted and without holding any button before you connect for flashing
hangar18
hangar18
hangar18
Enthusiastic Member
10
10-09-2019, 06:25 AM
#5



(09-09-2019, 04:31 PM)X3non
(08-09-2019, 04:22 AM)hangar18 hello there
...

are you holding any buttons when you connect the phone to attempt flashing?
try flashing both with and without the battery inserted and without holding any button before you connect for flashing
i tried every button combinations, including without the battery on it., still the same

do you know what "STATUS_SEC_IMG_TYPE_MISMATCH" means?
i tried flashing my phone via another PC, it gets "STATUS_SEC_IMG_TYPE_MISMATCH" again, no more "Failed To Get PMT info" message.
Should i remove the battery?
and i did try using Alcatel Mobile Upgrade, it took almost an hour Scanning Mobile Phone, and still nothing happened. how long should it take?


https://imgur.com/3xg0iKw

update:
it took more than an hour, and still nothing
This post was last modified: 10-09-2019, 07:33 AM by hangar18.
xerxes
xerxes
xerxes
Senior Member
8,355
10-09-2019, 02:02 PM
#6
(10-09-2019, 06:25 AM)hangar18
(09-09-2019, 04:31 PM)X3non
(08-09-2019, 04:22 AM)hangar18 hello there
...

are you holding any buttons when you connect the phone to attempt flashing?
try flashing both with and without the battery inserted and without holding any button before you connect for flashing
i tried every button combinations, including without the battery on it., still the same

do you know what "STATUS_SEC_IMG_TYPE_MISMATCH" means?
i tried flashing my phone via another PC, it gets "STATUS_SEC_IMG_TYPE_MISMATCH" again, no more "Failed To Get PMT info" message.
Should i remove the battery?
and i did try using Alcatel Mobile Upgrade, it took almost an hour Scanning Mobile Phone, and still nothing happened. how long should it take?
https://imgur.com/3xg0iKw
update:
it took more than an hour, and still nothing

Have you tried flashing using software download tool? https://www.hovatek.com/forum/thread-23709.html
X3non
X3non
X3non
Recognized Contributor
22,062
10-09-2019, 02:56 PM
#7
(10-09-2019, 06:25 AM)hangar18 i tried every button combinations, including without the battery on it., still the same

do you know what "STATUS_SEC_IMG_TYPE_MISMATCH" means?
i tried flashing my phone via another PC, it gets "STATUS_SEC_IMG_TYPE_MISMATCH" again, no more "Failed To Get PMT info" message.
Should i remove the battery?
and i did try using Alcatel Mobile Upgrade, it took almost an hour Scanning Mobile Phone, and still nothing happened. how long should it take?


https://imgur.com/3xg0iKw

update:
it took more than an hour, and still nothing

you'll find the error message @ https://www.hovatek.com/forum/thread-439.html and list of possible fixes
mobile upgrade will detect your device almost immediately so long as connection is right
look for a PC running windows 7 then use it to attempt flashing
hovatek
hovatek
hovatek
Administrator
49,570
10-09-2019, 08:08 PM
#8
(07-09-2019, 12:31 PM)hangar18 hi,
i have this phone Flash Plus 2 (Alcatel or TCL, i don't know), i formatted the whole Flash (including the bootloader), and the phone completely dead, when i tried to power up by pressing the power button, nothing happened, the phone just dead.
i then tried to flash it using flashtool, and the warning message "STATUS_SEC_IMG_TYPE_MISMATCH" showed up.
i did flash the phone before i format the whole flash, and it went fine, no error message.and i have a brand new system.
what is wrong with my phone?
help please

How did you get the Auth file you're using. Is it confirmed to be for your model?
Was the auth loaded during the previous flash and format?
This post was last modified: 10-09-2019, 08:10 PM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
hangar18
hangar18
hangar18
Enthusiastic Member
10
11-09-2019, 05:30 AM
#9
(10-09-2019, 08:08 PM)hovatek
(07-09-2019, 12:31 PM)hangar18 hi,
i have this phone Flash Plus 2 (Alcatel or TCL, i don't know), i formatted the whole Flash (including the bootloader), and the phone completely dead, when i tried to power up by pressing the power button, nothing happened, the phone just dead.
i then tried to flash it using flashtool, and the warning message "STATUS_SEC_IMG_TYPE_MISMATCH" showed up.
i did flash the phone before i format the whole flash, and it went fine, no error message.and i have a brand new system.
what is wrong with my phone?
help please

How did you get the Auth file you're using. Is it confirmed to be for your model?
Was the auth loaded during the previous flash and format?
i got the Auth file from a Flash Plus 2 Group on Facebook, i previously used it to flash the Flash Plus 2 before it got bricked, and it worked fine.
The Auth file was zipped along with the SPFT pacth that specificaly for my flash plus 2, i use SPFT v.5.1636

previously, my phone bootloop, i flash it using the SPFT v.5.1636 (with patch), it worked.
now, my phone is completely dead, when i plugged to USB or charger, the light is on, but i can't power it up, no boot logo, nothing
This post was last modified: 11-09-2019, 05:40 AM by hangar18.
hangar18
hangar18
hangar18
Enthusiastic Member
10
11-09-2019, 05:31 AM
#10



(10-09-2019, 02:02 PM)innagee
(10-09-2019, 06:25 AM)hangar18
(09-09-2019, 04:31 PM)X3non
(08-09-2019, 04:22 AM)hangar18 hello there
...

are you holding any buttons when you connect the phone to attempt flashing?
try flashing both with and without the battery inserted and without holding any button before you connect for flashing
i tried every button combinations, including without the battery on it., still the same

do you know what "STATUS_SEC_IMG_TYPE_MISMATCH" means?
i tried flashing my phone via another PC, it gets "STATUS_SEC_IMG_TYPE_MISMATCH" again, no more "Failed To Get PMT info" message.
Should i remove the battery?
and i did try using Alcatel Mobile Upgrade, it took almost an hour Scanning Mobile Phone, and still nothing happened. how long should it take?
https://imgur.com/3xg0iKw
update:
it took more than an hour, and still nothing

Have you tried flashing using software download tool? https://www.hovatek.com/forum/thread-23709.html
i'm still trying to checksum
how long does it take to generate checksum? it seems like forever

Update:

Done CheckSum

what is this?

https://imgur.com/nxt01j4
This post was last modified: 11-09-2019, 08:31 AM by hangar18.
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram