[Please help] Infinix Note 5 X604 boot to recovery with dead android robot
[Please help] Infinix Note 5 X604 boot to recovery with dead android robot
(17-09-2019, 06:50 PM)innagee(17-09-2019, 01:53 PM)brilliant_smart(17-09-2019, 11:40 AM)X3non(17-09-2019, 04:33 AM)brilliant_smart The present state of the phone is dead android robot with no command, it starts and go straight to that state.
It stayed dead if I format without loading the firmware, and after successful flash it goes straight back to dead android which didn't go to recovery..
I can't remember the original build, it was brought to me like that
i'll take it you didn't verify the build number before attempting to flash
after successfully flashing firmware then you press ONLY power button, does the phone go straight to the android on its back screen or it gets stuck at boot?
on the android lying on its back screen, press power + vol up ; does the phone proceed to main recovery mode? if yes, then try factory reset then reboot
No the phone doesn't stuck at boot, it go straight to the dead android.
However, pressing power + volume up doesn't take it to main recovery mode..
Plus in all the files I downloaded, no recovery in the files list
How many firmware @ https://www.hovatek.com/forum/thread-23512.html have you tried?
After flashing each firmware, does the build no. written at the top in recovery menu changes?
Also, have you tried reading the phone's info to see if build no changes after flashing?
(18-09-2019, 01:00 PM)brilliant_smart(17-09-2019, 06:50 PM)innagee(17-09-2019, 01:53 PM)brilliant_smart(17-09-2019, 11:40 AM)X3non(17-09-2019, 04:33 AM)brilliant_smart The present state of the phone is dead android robot with no command, it starts and go straight to that state.
It stayed dead if I format without loading the firmware, and after successful flash it goes straight back to dead android which didn't go to recovery..
I can't remember the original build, it was brought to me like that
i'll take it you didn't verify the build number before attempting to flash
after successfully flashing firmware then you press ONLY power button, does the phone go straight to the android on its back screen or it gets stuck at boot?
on the android lying on its back screen, press power + vol up ; does the phone proceed to main recovery mode? if yes, then try factory reset then reboot
No the phone doesn't stuck at boot, it go straight to the dead android.
However, pressing power + volume up doesn't take it to main recovery mode..
Plus in all the files I downloaded, no recovery in the files list
How many firmware @ https://www.hovatek.com/forum/thread-23512.html have you tried?
After flashing each firmware, does the build no. written at the top in recovery menu changes?
Also, have you tried reading the phone's info to see if build no changes after flashing?
X604-H633H-O-180531V182.zip
X604-H633IJL-O-180531V181.zip
It doesn't go to recovery only dead android lying on its back
the build number changes after writing each of the firmware
the owner brought it with the problem, claimed that it goes to that mode by itself
(21-09-2019, 10:23 AM)brilliant_smart in the process of making it work before doing the hardware I formatted everything, baseband is there but it loses imei how do I repair pls?See https://www.hovatek.com/forum/thread-116.html , you can use miracle or maui meta method.