tecno camon 11 CF7
tecno camon 11 CF7
(23-09-2019, 02:27 PM)fenec2dz Hello
I rooted my tecno camon 11 cft MT6739 with the procedure described here https://www.hovatek.com/forum/thread-21427.html
everything worked well, the phone is roote.
the problem started when i turned off the oem option in the phone's system setting.
when I'm turned off and on, it only displays the tecno logo and a message;Red state
your device has failed and can not work properly
your device wil boot in 5 seconds.
I try to flash it with spflastool, but the forum DA file https://www.hovatek.com/forum/thread-23243.html does not work.
with the fastboot command I can see the device, but I can not flash it because locked, please help me.
(24-09-2019, 09:32 AM)fenec2dz Hello;
maybe you did not understand me.
all I want is to unlock OEM. with the fastboot method, it does not work, that's why I want to use spflashtool, to reinstall the original firmware.
but the authentication file put in the forum,Tecno CF7 / CF7K Camon 11
https://mega.nz/#!83QjWKRB!MjutqjLyo_82d...UzWYesRGw4,
...
(24-09-2019, 12:28 PM)X3non(24-09-2019, 09:32 AM)fenec2dz Hello;
maybe you did not understand me.
all I want is to unlock OEM. with the fastboot method, it does not work, that's why I want to use spflashtool, to reinstall the original firmware.
but the authentication file put in the forum,Tecno CF7 / CF7K Camon 11
https://mega.nz/#!83QjWKRB!MjutqjLyo_82d...UzWYesRGw4,
...
we've not listed any auth file for cf7, what you downloaded is DA (download-agent) not auth
anyway either format seccfg partition using the guide @ https://www.hovatek.com/forum/thread-21638.html ; ensure to insert the custom DA into sp flash tool before proceeding. this should fix the red state error
OR flash your firmware using "firmware upgrade" in software download tool @ https://www.hovatek.com/forum/thread-23709.html
good news
I recovered my phone, thanks to your method.
again thank you .. thank you ... thank you .... X3non
(23-04-2020, 07:28 PM)jackie spalo I formatted all using Tecno tool so I may secure the bootloader once again but the sp tool says STATUS_SEC_AUTH_FILE_NEEDED (0xC0030013) and SoftwareDownload v4.1808 says A Connection failed! STATUS_SEC_AUTH_FILE_NEEDED[100%]
any solutions?