TECNO CAMON C7 HANGS ON BOOT(IT DOESNT GO PAST BOOT LOGO)
TECNO CAMON C7 HANGS ON BOOT(IT DOESNT GO PAST BOOT LOGO)
(07-02-2020, 01:46 PM)kioko(07-02-2020, 01:09 PM)kioko I have a tecno camon C7 , I used miracle box to format but it still hangs on boot,please assistthis is what i see when i get to recovery : TECNO /full_r/K6735_65u-m0/rlK6735_65u_m6.0/MRA58K/1467708914. I was able to read and did a backup
(07-02-2020, 06:08 PM)X3non(07-02-2020, 01:46 PM)kioko(07-02-2020, 01:09 PM)kioko I have a tecno camon C7 , I used miracle box to format but it still hangs on boot,please assistthis is what i see when i get to recovery : TECNO /full_r/K6735_65u-m0/rlK6735_65u_m6.0/MRA58K/1467708914. I was able to read and did a backup
from the backup you made, use method 4 or 7 @ https://www.hovatek.com/forum/thread-16005.html to verify the build number
then download and flash stock firmware for your build number @ https://www.hovatek.com/forum/thread-19276.html
(08-02-2020, 11:39 AM)kiokoand when i try using sp tool i get the error attached below too(07-02-2020, 06:08 PM)X3non(07-02-2020, 01:46 PM)kioko(07-02-2020, 01:09 PM)kioko I have a tecno camon C7 , I used miracle box to format but it still hangs on boot,please assistthis is what i see when i get to recovery : TECNO /full_r/K6735_65u-m0/rlK6735_65u_m6.0/MRA58K/1467708914. I was able to read and did a backup
from the backup you made, use method 4 or 7 @ https://www.hovatek.com/forum/thread-16005.html to verify the build number
then download and flash stock firmware for your build number @ https://www.hovatek.com/forum/thread-19276.html
I was able to identify the buildnumber:C7-H355A1-M-160705V9 but when writing data i get write error as attached below, when i tried sp tool i'm also getting an error
(08-02-2020, 01:37 PM)kioko finally when i try miracle box v2.58 the error is set patti
i'm using the stock firmware i downloaded here @https://www.hovatek.com/forum/thread-19276.html .the scatter file is attached below,for my backup from the pnone and the one i downloaded from the above link
(08-02-2020, 01:38 PM)kioko(08-02-2020, 01:37 PM)kioko finally when i try miracle box v2.58 the error is set patti
i'm using the stock firmware i downloaded here @https://www.hovatek.com/forum/thread-19276.html .the scatter file is attached below,for my backup from the pnone and the one i downloaded from the above link
(08-02-2020, 04:05 PM)kioko ...
(09-02-2020, 10:31 PM)hovatekthank you for the reply ,but the same error appears.the error is attached below after editing to both v1.1.2 and 3(08-02-2020, 04:05 PM)kioko ...
This Miracle box scatter won't work directly in SP flash tool. Try the edit @ https://www.hovatek.com/forum/thread-24287.html then retry flashing in sp flash tool