[Development] TWRP for Teclast P80X
[Development] TWRP for Teclast P80X
(23-03-2020, 03:00 AM)djelloul I've tried the TWRP *.img given in the link above and I can confirm it can be launched on Teclast P80X (G5K4 variant - the one with USB Type-C connector).
However, it has some troubles to be used.
I'm not an expert about TWRP debugging, but I can confirm at least 2 things:
- The SD Card storage cannot be mounted, so it's not possible to navigate through it.
- When I try to retrieve the internal storage data of the tablet memory, I can't found any folder giving acess to it.
By the way, browsing the shown folders seems to give scrambled folder and file names.
The good news is that TWRP system is launched without issue, but the bad one is that it can't be used as is right now.
Can I know if this TWRP *.img was built from a specific P80X firmware?
Maybe the issues I've raised are due to the fact that I'm using a G5K4 variant and not a G5K1 variant?
I know that it exists 3 variant of this tablet:
- G5K1 -> First release with a Micro USB connector and spread with 2 type of firmware, a Chinese one (CN - without Gapps) and a Worldwide one (WW - with Gapps).
- G5K2 -> Korean market specific. A release using almost the same HW as the G5K1 but using a different Modem and Wifi module with a. Worldwide Firmware.
- G5K4 -> The last known release from my own research. The difference with the G5K1 is the USB connector that is USB 3.0 Type-C and not Micro-USB anymore and it it has probably another modification on the PMIC power management chip but I don't know if it's SW or HW related. Spread with 2 type of firmware, a CN and a WW one, but only the CN one is available for download at Teclast support site.
I know all of this because I've made a mistake applying the G5K4 CN firmware and I discovered after action that there was 2 firmware variant...
Now I can't go back to the original firmware present at delivery and I have to deal with the CN firmware until Teclast release the WW one, but thanks to Hovatek efforts, I was able to root my device and add the needed Google services manually.
f TWRP is working, I'll try to install the openGapps package with it.
I stay at your disposition if you want me to do other tests.
(23-03-2020, 11:24 AM)djelloul ..
Do you have an idea why the internal storage and data partition doesn't looks as it should under TWRP interface?
For information my device is not encrypted.
Thank you very much for your kind help.
(24-03-2020, 09:39 AM)djelloul Sure,
Please see the screenshot attached in this post.