Hovatek Forum MOBILE Android I am not being able to flash my phone with SP flash tool.
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


I am not being able to flash my phone with SP flash tool.

I am not being able to flash my phone with SP flash tool.

Pukar
Pukar
Pukar
Enthusiastic Member
5
23-07-2020, 05:35 PM
#1



I am not being able to flash my phone with SP flash tool. While flashing it stops after writing 20.74 MB with ERROR: S_FT_DOWNLOAD_FAIL (4008). I have also attached screenshot.

When i tried to download files individually during flashing, every files gets downloaded but i couldn't download "System" files as it ceeases and shows same error as mentioned earlier. There is no any problem with firmware and drivers because i have flashed same device with same firmware multiple times. I have even tried Miracle box but same thing happened ito t i.e. it couldn't write System files. 

I installed TWRP recovery and tried to flash custom rom but there it shows error as
Failed to mount '/protect_f' (invalid arguement)
Failed to mount '/protect_s' (invalid arguement)
Failed to mount '/nvdata' (invalid arguement)
Failed to mount '/system (invalid arguement)
Failed to mount '/data (invalid arguement)
I tried to wipe partition but it shows same error as above.
What is problem with my device and how can i fix this problem ?
Is it related to hardware like emmc?

I ran Memory test with Sp flash tool and it shows Error: S_FT_MEMORY_TEST_FAIL (4080) after showing following result 


============ Memory Detection Report ===========
Internal RAM:
External RAM:
Type = DRAM

Size = 0xc0000000 (3072MB/24576Mb)
NAND Flash:

ERROR: NAND Flash was not detected!

EMMC:

EMMC_PART_BOOT1 Size = 0x0000000000400000(4MB)
EMMC_PART_BOOT2 Size = 0x0000000000400000(4MB)
EMMC_PART_RPMB Size = 0x0000000000400000(4MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000003a3e00000(14910MB)

UFS: 
ERROR: UFS was not detected!

============ RAM Test ============
Data Bus Test:
[D0]
[D1]
[D2]
[D3]
[D4]
[D5]
[D6]
[D7]
[D8]
[D9]
[D10]
[D11]
[D12]
[D13]
[D14]
[D15]
[D16]
[D17]
[D18]
[D19]
[D20]
[D21]
[D22]
[D23]
[D24]
[D25]
[D26]
[D27]
[D28]
[D29]
[D30]
[D31]
OK!!
Address Bus Test:
[A1]
[A2]
[A3]
[A4]
[A5]
[A6]
[A7]
[A8]
[A9]
[A10]
[A11]
[A12]
[A13]
[A14]
[A15]
[A16]
[A17]
[A18]
[A19]
[A20]
[A21]
[A22]
[A23]
[A24]
[A25]
[A26]
[A27]
[A28]
[A29]
[A30]
[A31]
OK!!

RAM Pattern Test :
Writing ...
0x44332211, 
0xA5A5A5A5, 
0xA5A5A500, 
0xA500A500, 
0xA5000000, 
0x00000000,
0xFFFF0000,
0xFFFFFFFF,


Is there any problem in memory test? 
I have attached BROM_DLL_V5 LOG here
Attached Files
.txt
BROM_DLL_V5 - Copy.txt
Size: 468.95 KB / Downloads: 8
.png
Annotation 2020-07-23 211716.png
Size: 146.64 KB / Downloads: 7
X3non
X3non
X3non
Recognized Contributor
22,062
24-07-2020, 09:19 AM
#2
(23-07-2020, 05:35 PM)Pukar I am not being able to flash my phone with SP flash tool. While flashing it stops after writing 20.74 MB with ERROR: S_FT_DOWNLOAD_FAIL (4008). I have also attached screenshot.
...

have you tried flashing the firmware using the firmware upgrade option or first go to the format tab then format all except bootloader then return to download tab and download all?
Pukar
Pukar
Pukar
Enthusiastic Member
5
26-07-2020, 03:50 PM
#3
Yes, i tried to upgrade firmware but it shows error as: BROM ERROR :S_DA_SDMMC_WRITE_FAILED (0xC52)
and when i tried to format with "Format all except bootloader" option it also shows same error ie. BROM ERROR :S_DA_SDMMC_WRITE_FAILED (0xC52)
Whenever i tried to download all files it always stops after downloading 20.74 Mb and pop up message "BROM ERROR :S_FT_DOWNLOAD_FAIL (0xFA8)" appears
Pukar
Pukar
Pukar
Enthusiastic Member
5
26-07-2020, 03:55 PM
#4
(24-07-2020, 09:19 AM)X3non
(23-07-2020, 05:35 PM)Pukar I am not being able to flash my phone with SP flash tool. While flashing it stops after writing 20.74 MB with ERROR: S_FT_DOWNLOAD_FAIL (4008). I have also attached screenshot.
...
[quote pid="198227" dateline="1595578747"]
Yes, i tried to upgrade firmware but it shows error as: BROM ERROR :S_DA_SDMMC_WRITE_FAILED (0xC52)
and when i tried to format with "Format all except bootloader" option it also shows same error ie. BROM ERROR :S_DA_SDMMC_WRITE_FAILED (0xC52)
Whenever i tried to download all files it always stops after downloading 20.74 Mb and pop up message "BROM ERROR :S_FT_DOWNLOAD_FAIL (0xFA8)" appears

have you tried flashing the firmware using the firmware upgrade option or first go to the format tab then format all except bootloader then return to download tab and download all?
[/quote]
X3non
X3non
X3non
Recognized Contributor
22,062
27-07-2020, 09:41 AM
#5



(26-07-2020, 03:50 PM)Pukar Yes, i tried to upgrade firmware but it shows error as: BROM ERROR :S_DA_SDMMC_WRITE_FAILED (0xC52)
and when i tried to format with "Format all except bootloader" option it also shows same error ie. BROM ERROR :S_DA_SDMMC_WRITE_FAILED (0xC52)
Whenever i tried to download all files it always stops after downloading 20.74 Mb and pop up message "BROM ERROR :S_FT_DOWNLOAD_FAIL (0xFA8)" appears

return back to the format tab, try formatting whole flash if successful then retry flashing the firmware
hovatek
hovatek
hovatek
Administrator
49,570
27-07-2020, 06:06 PM
#6
(26-07-2020, 03:55 PM)Pukar have you tried flashing the firmware using the firmware upgrade option or first go to the format tab then format all except bootloader then return to download tab and download all?

send a link to your stock recovery and TWRP images so we check the mount points

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Pukar
Pukar
Pukar
Enthusiastic Member
5
31-07-2020, 01:21 PM
#7
(27-07-2020, 09:41 AM)X3non
(26-07-2020, 03:50 PM)Pukar When i try to format using "whole flash" it shows same error  ie. BROM ERROR :S_DA_SDMMC_WRITE_FAILED (0xC52)

return back to the format tab, try formatting whole flash if successful then retry flashing the firmware
Pukar
Pukar
Pukar
Enthusiastic Member
5
31-07-2020, 01:34 PM
#8
(27-07-2020, 06:06 PM)hovatek
(26-07-2020, 03:55 PM)Pukar Do you mean link from where i downloaded stock ROM and TWRP or what? Sorry i didn't get you. Please explain.

send a link to your stock recovery and TWRP images so we check the mount points
X3non
X3non
X3non
Recognized Contributor
22,062
01-08-2020, 12:31 PM
#9
(31-07-2020, 01:21 PM)Pukar When i try to format using "whole flash" it shows same error  ie. BROM ERROR :S_DA_SDMMC_WRITE_FAILED (0xC52)

doesn't seem like spft will be of any help

unpack both your stock recovery and the twrp using android image kitchen ; there's a link for this in the requirements section @ https://www.hovatek.com/forum/thread-32715.html

edit ramdisk/etc/recovery.fstab from both stock and twrp using any text editor such as notepad++ , check and confirm if the mount point values are the same, it'll look something like "/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/*"

if it's not the replace the mount points within twrp's fstab using the values you get from stock recovery's fstab

repack the twrp once done then flash back to your device and check if you're able to mount everything under TWRP > mount
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram