Hovatek Forum MOBILE Android [Please help] Tecno Spark 2 won't boot
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] Tecno Spark 2 won't boot

[Please help] Tecno Spark 2 won't boot

MuzomboJr
MuzomboJr
MuzomboJr
Enthusiastic Member
10
29-08-2020, 11:49 AM
#1



So I flashed my Spark 2 a couple of days ago, but since then, it doesn't boot. When I connect the charger, the indicator lights up, but the screen stays black. I can't even boot into recovery mode. Now, SPFT won't even recognize it. Is there anything I can do to resurrect it?
hovatek
hovatek
hovatek
Administrator
49,570
30-08-2020, 11:17 AM
#2
(29-08-2020, 11:49 AM)MuzomboJr So I flashed my Spark 2 a couple of days ago, but since then, it doesn't boot. When I connect the charger, the indicator lights up, but the screen stays black. I can't even boot into recovery mode. Now, SPFT won't even recognize it. Is there anything I can do to resurrect it?

Disconnect and reconnect the battery. Its probably stuck in flash mode. Refer to https://www.hovatek.com/forum/thread-808.html
Do you recall its original build number (before flashing)?
Which build @ https://www.hovatek.com/forum/thread-24299.html did you just flash?
This post was last modified: 30-08-2020, 11:18 AM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
MuzomboJr
MuzomboJr
MuzomboJr
Enthusiastic Member
10
30-08-2020, 06:22 PM
#3
(30-08-2020, 11:17 AM)hovatek Disconnect and reconnect the battery. Its probably stuck in flash mode. Refer to https://www.hovatek.com/forum/thread-808.html
Do you recall its original build number (before flashing)?
Which build @ https://www.hovatek.com/forum/thread-24299.html did you just flash?
The build I flashed was Tecno Spark 2 KA7O (KA7-H8024D-O-180615V104). That is its original build.
Jimslaw
Jimslaw
Jimslaw
Techie Member
75
30-08-2020, 11:57 PM
#4
Try disconnecting the battery and reconnect charge for sometime if it gets detected flash individual one by one preferably preloader file
X3non
X3non
X3non
Recognized Contributor
22,062
31-08-2020, 02:47 PM
#5



(30-08-2020, 06:22 PM)MuzomboJr The build I flashed was Tecno Spark 2 KA7O (KA7-H8024D-O-180615V104). That is its original build.

if this is so then try disconnecting / reconnecting the battery as has been suggested a couple of times already, if the emmc is in good condition then the phone will power on
MuzomboJr
MuzomboJr
MuzomboJr
Enthusiastic Member
10
31-08-2020, 03:25 PM
#6
(31-08-2020, 02:47 PM)X3non if this is so then try disconnecting / reconnecting the battery as has been suggested a couple of times already, if the emmc is in good condition then the phone will power on
I tried that but still nothing happened. Maybe I should just continue charging it ?
X3non
X3non
X3non
Recognized Contributor
22,062
01-09-2020, 09:23 AM
#7
(31-08-2020, 03:25 PM)MuzomboJr I tried that but still nothing happened. Maybe I should just continue charging it ?

just to confirm, you are certain that you disconnected the battery clip? not some other clip?
if you disassembled the back cover and there's more than one clip, disconnect all unless you are absolutely sure of which one is the battery clip

if you've flashed the exact same build previously on the phone, disconnected / reconnected the battery clip, connected to a charging source and attempted to power on and the device still remains dead then the emmc chip of the device is faulty
MuzomboJr
MuzomboJr
MuzomboJr
Enthusiastic Member
10
01-09-2020, 08:58 PM
#8
(01-09-2020, 09:23 AM)X3non just to confirm, you are certain that you disconnected the battery clip? not some other clip?
if you disassembled the back cover and there's more than one clip, disconnect all unless you are absolutely sure of which one is the battery clip

if you've flashed the exact same build previously on the phone, disconnected / reconnected the battery clip, connected to a charging source and attempted to power on and the device still remains dead then the emmc chip of the device is faulty
So I took it to a repair shop, and I was told it  needs some kind of power restoration, don't know what that is
X3non
X3non
X3non
Recognized Contributor
22,062
02-09-2020, 08:09 PM
#9
(01-09-2020, 08:58 PM)MuzomboJr ... it needs some kind of power restoration...

you'll need to find out from the shop what they mean by this
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram