Hovatek Forum MOBILE Android Gionee GN8003 Dead after Unlocking Bootloader
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Gionee GN8003 Dead after Unlocking Bootloader

Gionee GN8003 Dead after Unlocking Bootloader

Pages (4): Previous 1 2 3 4 Next
MrDonDero
MrDonDero
MrDonDero
Junior Member
20
13-09-2020, 03:27 PM
#11



(12-09-2020, 06:14 PM)X3non
(12-09-2020, 01:48 PM)Iken99 The gionee m6 GN8003 is different from other m6  i could have uploaded the flashtool, ROM,  DA and auth file but i no too get data.  Everything is roughly 12gb,  first u need to flash the signed chinese rom to wake the phone after  that unlock the bootloader and the the global rom that contains gapps. Remember the global rom alone might not wake the phone now that its dead you'll need the Signed Chinese ROM WITH CERTIFACATE.

@iKEN99  the build number is M6 GN8003_MT6755_BBL%15A_T0115

I there a way you can share me with the link where you downloaded the flash flies you used to restore your device when it went dead ?
MrDonDero
MrDonDero
MrDonDero
Junior Member
20
13-09-2020, 03:43 PM
#12
(11-09-2020, 07:59 PM)Iken99
(11-09-2020, 10:53 AM)MrDonDero it just wont boot up. tried flashing with SP flash tool got an error.

Had to downlaod DA/AUTH file to flash but non of the flashing tools i tired is working

Current state of the phone is DEAD but has an active proloader(PC CAN DETECT THE PHONE)

Please what can i do now



i had the same issue some time ago, currently using the same phone, those chinese variants are stubborn and have their own signed tools and firmwares, if you are still having problems chat/call me
MrDonDero
MrDonDero
MrDonDero
Junior Member
20
13-09-2020, 03:47 PM
#13
(12-09-2020, 01:54 PM)Iken99
(12-09-2020, 01:48 PM)Iken99 The gionee m6 GN8003 is different from other m6  i could have uploaded the flashtool, ROM,  DA and auth file but i no too get data.  Everything is roughly 12gb,  first u need to flash the signed chinese rom to wake the phone after  that unlock the bootloader and then flash the Rom that contains gapps. later fix imei and radio etc,  Remember the global rom alone might not wake the phone now that its dead you'll need the Signed Chinese ROM WITH CERTIFACATE.

@IKEN99 ...Please share the download links 
MrDonDero
MrDonDero
MrDonDero
Junior Member
20
13-09-2020, 03:48 PM
#14
(13-09-2020, 03:43 PM)MrDonDero
(11-09-2020, 07:59 PM)Iken99
(11-09-2020, 10:53 AM)MrDonDero it just wont boot up. tried flashing with SP flash tool got an error.

Had to downlaod DA/AUTH file to flash but non of the flashing tools i tired is working

Current state of the phone is DEAD but has an active proloader(PC CAN DETECT THE PHONE)

Please what can i do now



i had the same issue some time ago, currently using the same phone, those chinese variants are stubborn and have their own signed tools and firmwares, if you are still having problems chat/call me


Kindly provide your contact or chat me up with 07015022415 thanks
MrDonDero
MrDonDero
MrDonDero
Junior Member
20
13-09-2020, 03:54 PM
#15



(12-09-2020, 12:34 PM)hovatek
(09-09-2020, 04:32 PM)MrDonDero Dear Hovatek,

My Gionee M6 GN8003 is dead after i tried to unlock bootloader , unlocking done was waiting for phone to reboot but it didnt reboot.

My Gionne M6 GN8003 can still be detected by PC but when i try to full flash with SP flash tool i get and error saying AUTH error. 4

Have downloaded the DA/AUTH from you guys but still cant flash with SP flash tool 

Kindly help

1. Shed some light on the steps you took to unlock bootloader and everything that happened up until it went totally dead.
2. How many M6 builds @ https://www.hovatek.com/forum/thread-389.html have you flashed so far? Tried the Gionee M6 MT6755_amigo3.5.0_20170307_191619 (Systemless) yet?


MY ANSWER
@question 1   Ran CMD as an admin and used the command instruct using fastboot to unlock the bootloader, unlocking was successful then immediately i rebooted the phone went off 

@question 2 i have not tried that firmware let me see whether i can download and try then i will reply to the thread with situation 
MrDonDero
MrDonDero
MrDonDero
Junior Member
20
13-09-2020, 04:18 PM
#16
(13-09-2020, 03:54 PM)MrDonDero
(12-09-2020, 12:34 PM)hovatek
(09-09-2020, 04:32 PM)MrDonDero Dear Hovatek,

My Gionee M6 GN8003 is dead after i tried to unlock bootloader , unlocking done was waiting for phone to reboot but it didnt reboot.

My Gionne M6 GN8003 can still be detected by PC but when i try to full flash with SP flash tool i get and error saying AUTH error. 4

Have downloaded the DA/AUTH from you guys but still cant flash with SP flash tool 

Kindly help

1. Shed some light on the steps you took to unlock bootloader and everything that happened up until it went totally dead.
2. How many M6 builds @ https://www.hovatek.com/forum/thread-389.html have you flashed so far? Tried the Gionee M6 MT6755_amigo3.5.0_20170307_191619 (Systemless) yet?


MY ANSWER
@question 1   Ran CMD as an admin and used the command instruct using fastboot to unlock the bootloader, unlocking was successful then immediately i rebooted the phone went off 

@question 2 i have not tried that firmware let me see whether i can download and try then i will reply to the thread with situation 


UPDATE !!!!

Just tried the amigo3.5.0 systemless file still DID NOT WORK with SP flash tool and GN_MTK_MPKey_SP_Downlaod tool (BROM ERROR: s_brom_cmd_startcmd_fail -x7D5)

that's the error i get 
X3non
X3non
X3non
Recognized Contributor
22,062
14-09-2020, 10:28 AM
#17
(12-09-2020, 07:35 PM)Iken99 Yes, i think so.

thanks for verifying...


(13-09-2020, 03:47 PM)MrDonDero @IKEN99 ...Please share the download links 

we've just added a link to the firmware @iken99 verified as the chinese firmware
check for the build number BBL7515A_sign_T0158 @ https://www.hovatek.com/forum/thread-389.html
MrDonDero
MrDonDero
MrDonDero
Junior Member
20
14-09-2020, 11:07 AM
#18
(14-09-2020, 10:28 AM)X3non
(12-09-2020, 07:35 PM)Iken99 Yes, i think so.

thanks for verifying...


(13-09-2020, 03:47 PM)MrDonDero @IKEN99 ...Please share the download links 

we've just added a link to the firmware @iken99 verified as the chinese firmware
check for the build number BBL7515A_sign_T0158 @ https://www.hovatek.com/forum/thread-389.html

UPDATE!!!
The Chinese link is questing me to create an account before i can download 

is there any other link to download the SIGNED file 
xerxes
xerxes
xerxes
Senior Member
8,355
14-09-2020, 03:26 PM
#19
(14-09-2020, 11:07 AM)MrDonDero UPDATE!!!
The Chinese link is questing me to create an account before i can download 

is there any other link to download the SIGNED file 

see the important notice @ https://www.hovatek.com/forum/thread-20892.html
This post was last modified: 15-09-2020, 02:39 AM by X3non.
MrDonDero
MrDonDero
MrDonDero
Junior Member
20
16-09-2020, 12:13 PM
#20



(14-09-2020, 10:28 AM)X3non
(12-09-2020, 07:35 PM)Iken99 Yes, i think so.

thanks for verifying...


(13-09-2020, 03:47 PM)MrDonDero @IKEN99 ...Please share the download links 

we've just added a link to the firmware @iken99 verified as the chinese firmware
check for the build number BBL7515A_sign_T0158 @ https://www.hovatek.com/forum/thread-389.html
Pages (4): Previous 1 2 3 4 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram