Hovatek Forum MOBILE Android Recover a dead Tecno Camon 11
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Recover a dead Tecno Camon 11

Recover a dead Tecno Camon 11

mithrasLegend
mithrasLegend
mithrasLegend
Newbie
3
21-09-2020, 02:20 PM
#1



Greetings, 
     A while ago in an attempt to brick my phone using fastboot, i used a wrong twrp.img file and when i loaded it, the phone went dead. The only thing that works now is the plugged in indicator when i put it on charge. i have tried everything from letting it charge for long and nothing has worked so far, thats why am requesting for help on how to recover it and get it working. Connecting it to the computer, it connects and disconnects so fast there is nothing i can do so far. Any help is appreciated . The phone is a tecno camon 11 cf7

thank you
This post was last modified: 21-09-2020, 02:23 PM by mithrasLegend.
xerxes
xerxes
xerxes
Senior Member
8,355
22-09-2020, 09:07 AM
#2
(21-09-2020, 02:20 PM)mithrasLegend Greetings, 
     A while ago in an attempt to brick my phone using fastboot, i used a wrong twrp.img file and when i loaded it, the phone went dead. The only thing that works now is the plugged in indicator when i put it on charge. i have tried everything from letting it charge for long and nothing has worked so far, thats why am requesting for help on how to recover it and get it working. Connecting it to the computer, it connects and disconnects so fast there is nothing i can do so far. Any help is appreciated . The phone is a tecno camon 11 cf7

thank you

flashing TWRP only isn't supposed to brick the phone and if does then flashing stock recovery.img will to fix it unless if you executed some wrong commands on fastboot.
did you take note of the phone's build no?
also you need to confirm the phone is not stuck in flash mode, you can do that by draining the battery or loosen and disconnect/reconnect the phone's battery before power on.
This post was last modified: 22-09-2020, 09:10 AM by xerxes.
X3non
X3non
X3non
Recognized Contributor
22,062
22-09-2020, 09:13 AM
#3
(21-09-2020, 02:20 PM)mithrasLegend Greetings, 
     A while ago in an attempt to brick my phone using fastboot,

you made an attempt to purposefully brick the device?


(21-09-2020, 02:20 PM)mithrasLegend i used a wrong twrp.img file and when i loaded it, the phone went dead. The only thing that works now is the plugged in indicator when i put it on charge. i have tried everything from letting it charge for long and nothing has worked so far, thats why am requesting for help on how to recover it and get it working. Connecting it to the computer, it connects and disconnects so fast there is nothing i can do so far. Any help is appreciated . The phone is a tecno camon 11 cf7

do you know the build number of your device?
did you try disconnecting / reconnecting the battery of the device? and it still remains dead?
mithrasLegend
mithrasLegend
mithrasLegend
Newbie
3
22-09-2020, 11:05 AM
#4
i did disconnect the battery even tho it was inbuilt, i only have the model number not the build number, am sorry. and the problem still persists. i cant be able to flash anything on it since when detected by the pc it disconnects so fast i can send anything. When i try to use SP tool to flash recovery, it bring errors when its detected like needing a SEC AUTH FILE.
mithrasLegend
mithrasLegend
mithrasLegend
Newbie
3
22-09-2020, 11:06 AM
#5



i dont have its build number just the model number CF7. i did open it and disconnected the battery terminal and reconnected it back. it is still dead, i am trying charging it for a ridiculous amount of time and still nothing
This post was last modified: 22-09-2020, 11:08 AM by mithrasLegend.
hovatek
hovatek
hovatek
Administrator
49,570
23-09-2020, 08:00 AM
#6
(22-09-2020, 11:06 AM)mithrasLegend i dont have its build number just the model number CF7. i did open it and disconnected the battery terminal and reconnected it back. it is still dead, i am trying charging it for a ridiculous amount of time and still nothing

First, you need to find out the build number

Use the Miracle Thunder method @ https://www.hovatek.com/forum/thread-16005.html or backup the firmware in scatter format using Miracle Thunder as explained @ https://www.hovatek.com/forum/thread-13347.html
*ensure to load the DA file @ https://www.hovatek.com/forum/thread-23243.html


Next, you flash the firmware
Download the firmware for your build @ https://www.hovatek.com/forum/thread-25781.html and flash it using https://www.hovatek.com/forum/thread-23709.html

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram