Hovatek Forum MOBILE Android [Huawei Y5 Prime 2018 DRA-LX2] Trying to get proinfo file
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Huawei Y5 Prime 2018 DRA-LX2] Trying to get proinfo file

[Huawei Y5 Prime 2018 DRA-LX2] Trying to get proinfo file

tilt
tilt
tilt
Newbie
2
14-10-2020, 12:46 PM
#1



Hi, I'm trying to get the proinfo file of this phone using SP Flash Tool but I'm encountering an error.

This is the last output as soon as I connect the phone to the USB cable while holding down the Volume Down button.

Code:

vid is 0e8d

device vid = 0e8d

pid is 0003

device pid = 0003

com portName is: /dev/ttyACM0

Total wait time = -1602675085.000000
USB port is obtained. path name(/dev/ttyACM0), port name(/dev/ttyACM0)
USB port detected: /dev/ttyACM0
Enter SLA_Challenge!!
Connect BROM failed: STATUS_BROM_CMD_FAIL(-1073348603)
Disconnect!
BROM Exception! ( ERROR : STATUS_BROM_CMD_FAIL (-1073348603) , MSP ERROE CODE : 0x00



I'm using SP Flash Tool version 5.1916 on Linux ( Ubuntu 14.04 )

I downloaded the DA + Auth file from here

Am I doing something wrong? My intention is to get access to the proinfo partition.
I'm using this as a reference.

If anyone can guide me , that would be much appreciated.
hovatek
hovatek
hovatek
Administrator
49,570
18-10-2020, 05:15 AM
#2
(14-10-2020, 12:46 PM)tilt Hi, I'm trying to get the proinfo file of this phone using SP Flash Tool but I'm encountering an error.

This is the last output as soon as I connect the phone to the USB cable while holding down the Volume Down button.

Code:

vid is 0e8d

device vid = 0e8d

pid is 0003

device pid = 0003

com portName is: /dev/ttyACM0

Total wait time = -1602675085.000000
USB port is obtained. path name(/dev/ttyACM0), port name(/dev/ttyACM0)
USB port detected: /dev/ttyACM0
Enter SLA_Challenge!!
Connect BROM failed: STATUS_BROM_CMD_FAIL(-1073348603)
Disconnect!
BROM Exception! ( ERROR : STATUS_BROM_CMD_FAIL (-1073348603) , MSP ERROE CODE : 0x00



I'm using SP Flash Tool version 5.1916 on Linux ( Ubuntu 14.04 )

I downloaded the DA + Auth file from here

Am I doing something wrong? My intention is to get access to the proinfo partition.
I'm using this as a reference.

If anyone can guide me , that would be much appreciated.

Don't hold any button when connecting

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
tilt
tilt
tilt
Newbie
2
19-10-2020, 02:11 PM
#3
(18-10-2020, 05:15 AM)hovatek
(14-10-2020, 12:46 PM)tilt Hi, I'm trying to get the proinfo file of this phone using SP Flash Tool but I'm encountering an error.

This is the last output as soon as I connect the phone to the USB cable while holding down the Volume Down button.

Code:

vid is 0e8d

device vid = 0e8d

pid is 0003

device pid = 0003

com portName is: /dev/ttyACM0

Total wait time = -1602675085.000000
USB port is obtained. path name(/dev/ttyACM0), port name(/dev/ttyACM0)
USB port detected: /dev/ttyACM0
Enter SLA_Challenge!!
Connect BROM failed: STATUS_BROM_CMD_FAIL(-1073348603)
Disconnect!
BROM Exception! ( ERROR : STATUS_BROM_CMD_FAIL (-1073348603) , MSP ERROE CODE : 0x00



I'm using SP Flash Tool version 5.1916 on Linux ( Ubuntu 14.04 )

I downloaded the DA + Auth file from here

Am I doing something wrong? My intention is to get access to the proinfo partition.
I'm using this as a reference.

If anyone can guide me , that would be much appreciated.

Quote:Don't hold any button when connecting
 
Code:

Connecting to BROM...
Scanning USB port...
Search usb, timeout set as 3600000 ms
add@/devices/pci0000:00/0000:00:14.0/usb1/1-1

add@/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0

add@/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1

add@/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/tty/ttyACM0

vid is 0e8d

device vid = 0e8d

pid is 2000

device pid = 2000

com portName is: /dev/ttyACM0

Total wait time = -1603112673.000000
USB port is obtained. path name(/dev/ttyACM0), port name(/dev/ttyACM0)
USB port detected: /dev/ttyACM0
Connect BROM failed: STATUS_BROM_CMD_STARTCMD_FAIL(-1073348607)
Disconnect!
BROM Exception! ( ERROR : STATUS_BROM_CMD_STARTCMD_FAIL (-1073348607) , MSP ERROE CODE : 0x00.


[HINT]:
Please retry the operation:
1.remove battery and usb cable;
2.press download botton on flash tool;
3.pressing download volume down and plug in usb cable and download without battery.)((ConnectBROM,../../../flashtool/Conn/Connection.cpp,100))

Tried that . Now I'm getting this error


Looking at the logs i find this message

Code:

10/19/20 18:34:33.461 BROM_DLL[2329][2474]: DEBUG: DA_cmd(): m_p_stopflag(0x02BFFBF8)=0. (da_cmd.cpp:82)
10/19/20 18:34:33.461 BROM_DLL[2329][2474]: AUTH_GetInfo(): AUTH_HANDLE->rwlock: READ_LOCK ... (rwlock.cpp:323)
10/19/20 18:34:33.461 BROM_DLL[2329][2474]: AUTH_HANDLE: customer name = MTK
(flashtool_handle_internal.cpp:7259)
10/19/20 18:34:33.461 BROM_DLL[2329][2474]: AUTH_GetInfo(): AUTH_HANDLE->rwlock: READ_UNLOCK. (rwlock.cpp:339)
10/19/20 18:34:33.461 BROM_DLL[2329][2474]: SCERT_GetInfo(): SCERT_HANDLE->rwlock: READ_LOCK ... (rwlock.cpp:323)
10/19/20 18:34:33.461 BROM_DLL[2329][2474]: ERROR: SCERT_GetInfo(): <ERR_CHECKPOINT>[300][error][5007]</ERR_CHECKPOINT> [S_FTHND_FILE_IS_NOT_LOADED_YET] (flashtool_handle.cpp:2441)

 I already loaded the Auth file. Am i missing another file?
X3non
X3non
X3non
Recognized Contributor
22,062
20-10-2020, 11:55 AM
#4
(19-10-2020, 02:11 PM)tilt  I already loaded the Auth file. Am i missing another file?

try using a windows PC and post the result
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram