How to back up Mediatek firmware using Miracle Box

[Tutorial] How to back up Mediatek firmware using Miracle Box

X3non
Recognized Contributor

22,062

14-10-2020, 10:20 AM

#161

(13-10-2020, 11:54 AM)Wizard of Comp I did a full backup tecno cc7 minus userdata and cache, but all the resulting backup partitions are in .bin format. how can I change the format to make the backup to make it compatible with sp flashtool i.e. .img. Also note even in the scatter file that was created lists the partition in .bin format.
Check https://www.hovatek.com/forum/thread-368...#pid203020

stick to the thread you created and stop posting your issue everywhere

This post was last modified: 14-10-2020, 10:21 AM by X3non.

yekoyegetnet
Enthusiastic Member

10

26-10-2020, 07:21 AM

#162

Hey I have Tecno pop 2 plus mt6580 running on Android 8.1 go edition with unlocked bootloader. The problem I got is when i try to backup ( read) using miracle box as soon as miracle box detect my phone miracle box will crash (close) and my phone starts charging. i installed all the drivers that's needed I need help I don't know what to do ?

X3non
Recognized Contributor

22,062

26-10-2020, 09:05 AM

#163

(26-10-2020, 07:21 AM)yekoyegetnet Hey I have Tecno pop 2 plus mt6580 running on Android 8.1 go edition with unlocked bootloader. The problem I got is when i try to backup ( read) using miracle box as soon as miracle box detect my phone miracle box will crash (close) and my phone starts charging. i installed all the drivers that's needed I need help I don't know what to do ?

if you're using loader versions then ensure you are using miracle thunder 2.82 and using the DA file for this model @ https://www.hovatek.com/forum/thread-23243.html
also ensure you have properly install vcom preloader driver @ https://www.hovatek.com/forum/thread-440.html
if you still have anymore problems then create a new thread for your device issue by clicking "Ask Question" at the top

yekoyegetnet
Enthusiastic Member

10

27-10-2020, 06:06 PM

#164

I will try using miracle thunder 2.82 and using the DA file

yekoyegetnet
Enthusiastic Member

10

30-10-2020, 05:26 PM

#165

Tnx very much it worked
But I have one problem after backup my frimware I ported TWRP recovery version 3.1.1 using my backup recovery ( stock recovery which I backup it using miracle box) and flashed it to my Tecno pop 2 plus & everything is working fine but when I try to flash gsi rom wihch is supposed to be flashed in to system.img but the only choice I got is 1- boot 2- recovery it doesn't show system
Pls help

X3non
Recognized Contributor

22,062

31-10-2020, 11:01 AM

#166

(30-10-2020, 05:26 PM)yekoyegetnet Tnx very much it worked
But I have one problem after backup my frimware I ported TWRP recovery version 3.1.1 using my backup recovery ( stock recovery which I backup it using miracle box) and flashed it to my Tecno pop 2 plus & everything is working fine but when I try to flash gsi rom wihch is supposed to be flashed in to system.img but the only choice I got is 1- boot 2- recovery it doesn't show system
Pls help

see this post @ https://www.hovatek.com/forum/thread-275...#pid172900
if you still have problems then create a new thread for your device issue by clicking "Ask Question" at the top

HemanthJabalpuri
Techie Member

45

08-04-2021, 06:09 AM

#167

I have Realme C12 MT6765 Android 10 with DAA.

How to use MTK-bypass with Miracle Thunder 2.82?
I didn't used Miracle Tool before, so to be familiar with it I am using it instead of WwR MTK + SPFlash Tool to backup partitions.
It is only showing Waiting for USB Port when I Click Start Button after bypassing DAA with MTK-bypass.

Also which one to select in Boot Select dropdown?
- 8th Boot(MT65xx & MT67xx/8127)
- Boot(DA_SWSEC)(MT65xx & MT67xx)

Thanks

This post was last modified: 08-04-2021, 06:36 AM by HemanthJabalpuri.

X3non
Recognized Contributor

22,062

08-04-2021, 10:55 AM

#168

(08-04-2021, 06:09 AM)HemanthJabalpuri ...How to use MTK-bypass with Miracle Thunder 2.82?...

it won't work

HemanthJabalpuri
Techie Member

45

08-04-2021, 11:19 AM

#169

(08-04-2021, 10:55 AM)X3non it won't work

So no use with it execpt ADB and Fastboot tools if we don't have my device specific DA file?

Thanks

X3non
Recognized Contributor

22,062

08-04-2021, 07:40 PM

#170

(08-04-2021, 11:19 AM)HemanthJabalpuri So no use with it execpt ADB and Fastboot tools if we don't have my device specific DA file?

Thanks

exactly

View a Printable Version

Users browsing this thread:
1 Guest(s)

Find us

Call us

Mail us

Useful Links

Actions